ReviewsSingle screw Extruders

Isopropyl Alcohol 99% Spray 2.30 oz Pure Grade Sterilizer

Easy to use, all you have to do is to spray the desired area. For external use only..
Easy to use for Derma Roller Cleaning: Just spray isopropyl over the needles to clean. Small Bottle that you can always take wherever you go..
You are buying One - 2.30 oz Spray Bottle of Isopropyl Alcohol Pure Grade 99.9% Anhydrous. - Cap color might change -.
Great for treatment of minor cuts and scrapes, topical antimicrobial, first aid antiseptic, for rubbing, massaging, derma roller sterilizer, microneedling cleaning, and more..
Isopropyl alcohol - IPA is great for rinsing and cleaning liquid resin from 3D printed parts, extruders, print bed trays, celphone screen and removing support material. Sold by Weight / Not by Volume.

Check Stock

Memphis Audio MJP1244 12 in 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub, Black

Package Includes: (1) Memphis Audio MJP1544 15″ 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub. (1) Rockville dB13 3000 Watt Peak/750w RMS Mono 2 Ohm Amplifier Car Amp. (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA’s. (1) Rockville RSQ15 Single 15″ 2.6 cu.ft. Sealed Car Subwoofer Enclosure Sub Box. (1) Complete Single Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spades.
Features of MJP1544: Specifically designed for high SPL performance. DVVC Direct Vent Voice Coil Cooling. Cross drilled front plate venting. Aluminum shorting ring for reduced inductance. Foam surround. Rigid paper cone. Progressive spider. Diecast basket. Single Sided compression terminals. Size: 15 Inch. Voice coil: DUAL 4Ω. RMS/PEAK: 750/1500 Watts. SENS: 88 dB. DEPTH: 7.88 Inch. CUT OUT: 13.84 Inch.
Features of dB13: Rockville dB13 3000 Watt Peak/750w Dyno-Certified RMS Mono 2 Ohm Amplifier Car Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, RFFosgate, etc). – 2 Ohm: 750 Watts x 1 Channel .
Features of RWK41: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable. 1....

Check Stock

Culligan UB-1 Mounting Bracket with Screws

Mounting bracket for Culligan Whole House Sediment Water Filter HF-360 (1653-3325).
The Culligan UB-1 single housing bracket is a “U” shaped mounting bracket for 3/4″ inlet/outlet standard whole house housings..
The UB-1 mounts standard whole house water filter housings and helps support the weight of the water filter..
Screws are included with the UB-1 mounting bracket for securing the water filter housing to the wall. The screws are No.10 1-1/2″ pan head screws..

Check Stock

Official Creality Ender 3 S1 3D Printer, Upgraded Direct Drive FDM 3D Printers, Quick Assembly, with Auto Leveling Bed, Dual Z-axis Screws, Spring Steel Print Bed, Build Size 220x220x270 mm

...r】Creality Ender-3 S1 3D Printers Use Brand-new self-developed “Sprite” direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the “Sprite” is lighter and features less inertia and more precise positioning..
【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
【Power Loss Recovery and Filament Sensor】Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 works smoother....

Check Stock

Official Creality Ender 3 S1 Pro 3D Printers with 300℃ High Temperature Hotend All Metal Direct Drive Extruder, CR Touch Auto Leveling Bed, Spring Steel PEI Build Plate, Printing Size 220x220x270mm

...nder-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the "Sprite" is lighter and features less inertia and more precise positioning..
【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..

Check Stock

Sindoh - 3D2XQ 3DWOX 2X 3D Printer,Dual Extruder Wi-Fi Connected HEPA filter Flexible Metal Bed Plate Heated

✅ 3DWOX 2X has 2 Extruders that move independently achieving the highest efficiency possible..
✅ Open Source Filament Mode is available letting users to explore new printing possibilities. (May require firmware update).
✅ Offers HEPA filter and fully enclosed structure for user safety..
✅ 3DWOX 2X prints silence. The noise level of 2X is 40dB which is equivalent to the noise level of library..
✅ Offers automatic loading and unloading of filament.
Insert a cartridge and 3DWOX will do the rest..

Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

...duce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Easy to Assemble— Our ender 3 extruder and 1 meter capricorn tubing includes all th....

Check Stock

Polly Plastics Moldable Plastic Pellets for Cosplayers and Hobbyists in EZ Grip Jar with Idea Booklet 10 oz

HEAT & CREATE – Melt our moldable plastic pellets with hot water (>150F) and mold to any shape you like, by using your hands or using tools..
STRONG & REUSABLE – Plastic pellets can be re- melted again and again so you can build, reshape and add to your work as often as needed. Paint it,....
IDEA & INSTRUCTION BOOKLET INCLUDED – Learn the many ways you can use our moldable plastic with our 12 page color booklet..
MAKE, MEND & MODIFY – Use it for all types of crafts, art projects, home repair, model making, prototyping and more. No need for extruders, molds or....

Check Stock

Igloo Set of 2 Cooler Latch Posts & Screws (Part #24013)

Genuine Igloo parts. Igloo Part # 24013. Features Igloo logo on latch front..
Made by Igloo. Includes 2 Igloo latches (each latch comes with a single-screw button post pre-snapped in) and 6 stainless steel screws..
Fits Igloo 50-165 Qt coolers with latches that secure with a single-screw button / post..
Latch rests close to cooler when unlatched in order to minimize breakage. Integrated parts and guided locator post provide easy assembly..
Beveled latch edge deflects impact, reducing chance of breakage..

Check Stock

Igloo Cooler Stainless Steel Latch and Hinge Parts Kit

Made by Igloo. Kit includes: 2 stainless steel latches, 3 stainless steel hinges, 2 single screw attachment posts, and 18 screws (stainless steel,....
Latch fits most Igloo Ice Chests 50-165 Quart Coolers with latches that secure with a single-screw button post. Features Igloo logo on latch front..
Stainless steel construction is rust-resistant and durable (long-lasting)..
Please see installation diagram in fourth photo for proper installation. When attaching the latch to the cooler, turn the latch upside down with the....

Check Stock

Igloo Cooler Latch and Hinge Plastic Parts Kit

Made by Igloo. Kit includes: 2 plastic latches (each latch comes with a single-screw button post pre-snapped in), 3 plastic hinges, 18 screws (stainless steel, hi-low thread)..
Latch fits most Igloo Ice Chests 50-165 Quart Coolers with latches that secure with a single-screw button post. Features Igloo logo on latch front..
Igloo cooler parts contain UV inhibitors to protect against sun damage and breakdown, and are rugged and durable for a long cooler life..

Check Stock