ReviewsSingle screw Gearbox

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 Stainless Steel,Shaft Coupler Connector,Motor Accessories,2pcs

  • Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L25XD16 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs

  • Connection Diameter: 10mm to 10mm, Total Length: 25mm /0.98 inch, Outside Diameter : 16mm/ 0.63inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 10mm Bore Rigid Coupling Set Screw L25XD16 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs

  • Connection Diameter: 8mm to 10mm, Total Length: 25mm /0.98 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs

  • Connection Diameter: 8mm to 8mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L20xD12 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Red,2pcs

  • Connection Diameter: 5mm to 5mm, Total Length: 20mm /0.78 inch, Outside Diameter : 12mm/ 0.47 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 1/4 inch to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs

  • Connection Diameter: 1/4 inch to 8mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 1/4 inch to 10mm Bore Rigid Coupling Set Screw L25XD16 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs

  • Connection Diameter: 1/4 inch to 10mm, Total Length: 25mm /0.98 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue w Wrench

  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

GXARTS Truck Full Metal Transmission Assembled Gearbox with Steel Gear Set Compatible with Axial SCX10 1:10 RC Crawler

  • This product has passed strict quality inspection before leaving the factory. Complete alloy gearbox. The internal parts are alloy also.
  • Compatible with gmade komodo ,wraith, redcat everest 10,honcho scx10 ii , RGT 86100 1/10th RC SCX10 Rock Crawler .ect.
  • Complete Assembled, Directly Assemble that can use.
  • Package Includes: 1x Metal Assembled Transmission Gearbox w/ Steel Gear 1x Screws Package.
  • If you find any problems after receiving the goods, please contact us quickly! We are on-line 24 hours a day to solve your product problems at any time, and we are sure to win a satisfactory reply for you!.
Check Stock

Best Q M20 x 1.5MM Oil Drain Plug Thread Repair Kit Oil Pan Screws Rethread Tool

  • M20 x 1.5MM Oil Drain Plug Tap Thread Repair Kit Oil Pan Screws Rethread Tool.
  • Used to tap the damaged thread and slightly enlarge the diameter of oil drain hole, then fit a new drain plug and washer..
  • Ideal for repairing sump, gearbox and differential drain plug threads..
  • Suitable for 18mm engine oil screw after skidded and rethread by 20mm chaser then twist into 20mm screw + gasket..
  • Contents: Tap: M20*1.5 1pc, Screw: M20 6pc, Aluminum gasket: M20 6pc.
Check Stock

Craftsman Nextec 12-volt Cordless Drill/driver (Bare Tool, No Battery or Charger Included)

  • 195 in.-lbs. of torque, capable of driving screws through wood, metal and plastic.
  • 2-Speed Gearbox allows for a wider range of applications.
  • 18 position adjustable torque clutch allows better control while working with different size screws.
  • Integrated LED work light illuminates your work surface adequately.
  • Ergonomically designed handle makes it easy to use.
Check Stock