ReviewsSlewing Bearing Ring

SKF NUTR 15 A Yoke Type Track Roller, Cylindrical Roller Bearing, Crowned Roller, Unsealed, Metric, 15mm Bore, 35mm OD, 19mm Width

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Non-locating bearing (two ribs on the outer ring, none on the inner ring) for allowing outer and inner rings to axially displace relative to each other from the central position.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

SKF NU 1010 ML - Cylindrical Roller Bearing - Straight Bore, 50 mm ID, 80 mm OD, 16 mm Width, C0 Internal Clearance

  • Bearing steel long life bearing, smooth, low noise..
  • Single row cylindrical roller bearings , please add lubricating oil or grease when using,Straight bore for fitting on a conventional cylindrical shaft.
  • N206M NU206M NJ206M NF206M NUP206M (inner diameter = 30 mm, outer diameter = 62 mm, thickness = 16 mm)..
  • Notice Notice Notice: Because RN206 has no bearing outer ring, so its outer diameter is not 62mm..
  • Notice Notice Notice: Because RNU206 has no bearing inner ring, so its inner diameter is not 30mm..
Check Stock

Spicer 5-460X U-Joint Kit 1310 to 1350 Series (OSR)

  • Spicer greaseable universal joint with snap rings.
  • Bearing Cap Diameter (1): 1.062 inches / Bearing Cap Diameter (2): 1.188 inches.
  • Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches.
  • Outside to outside dimension: 3.219 inch.
Check Stock

Spicer 5-134X U-Joint Kit 1310/1330 Series (OSR)

  • Spicer greaseable universal joint with snap rings.
  • Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches.
  • Outside to outside dimension: 3.219 inch.
Check Stock

NTN RA1562EBL - Cylindrical Roller Bearing - Straight Bore, 30 mm ID, 70 mm OD, 1.1875 in Width, C0 Internal Clearance

  • INA cylindrical roller bearing with a removable outer ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

Timken OEM Harley Davidson 24729-74 Crankshaft Bearing Assembly 77-03 Sportster

  • Harley Davidson Crankshaft Bearing Assembly.
  • Contains:2X Timken L44649 Bearing + L44610 Race, Large Snap Ring (1), Small Snap Ring (1).
Check Stock

FAG NU313E-TVP2-C3 Cylindrical Roller Bearing Single Row Straight Bore Removable Inner Ring High Capacity Polyamide Cage C3 Clearance 65mm ID 140mm OD 33mm Width

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Non-locating bearing (two ribs on the outer ring, none on the inner ring) for allowing outer and inner rings to axially displace relative to each other from the central position.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

FAG NU204E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Capacity, Polyamide Cage, C3 Clearance, 20mm ID, 47mm OD, 14mm Width

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Non-locating bearing (two ribs on the outer ring, none on the inner ring) for allowing outer and inner rings to axially displace relative to each other from the central position.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

4 Pack 7 inch Snap Ring Pliers Set Heavy Duty Internal / External Circlip Pliers Kit with Straight Bent Jaw Precision Spring Loaded Pliers for Ring Remover Retaining (Green)

  • Materials - Circlip pliers are made of forged and hardened carbon steel with PVC dipped handles, anti-rust, durable and long lasting.
  • Comfortable and Reliable - The snap ring pliers are designed of ergonomic handles, provides overall control and instant holding power. Convenient for long time comfortable use and won’t slip from your hand.
  • Reliability - Retaining ring pliers spring loaded, easy to work with even for one-hand operation. Internal & External Snap Ring Pliers with fine tips can easily reach into tight spaces, grip small parts and bend wire..
  • Package Include - 7-Inch Straight Internal Snap Ring Pliers, 7-Inch 90-degree Angled Internal Snap Ring Pliers.
  • 7-Inch Straight External Snap Ring Pliers, 7-Inch 90-degree Angled External Snap Ring Pliers..
  • Applications - The snap ring pliers are perfect for removing and installing externally placed retaining rings. Supports bore/shaft size 3/4 to 2-23/64" or 19-60 mm. The snap ring pliers set are widely applied for the fixed bearing or hole bearing in machinery industry, bicycles, motorcycle, farm machinery..
Check Stock

FAG NJ306E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Flanged, High Capacity, Polyamide/Nylon Cage, C3 Clearance, Metric, 30mm ID, 72mm OD, 19mm Width

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Semi-locating bearing (two ribs on the outer ring, one rib on the inner ring) for supporting axial forces in one direction.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

FAG NJ2207E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Flanged, High Capacity, Polyamide/Nylon Cage, C3 Clearance, Metric, 35mm ID, 72mm OD, 23mm Width

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Semi-locating bearing (two ribs on the outer ring, one rib on the inner ring) for supporting axial forces in one direction.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock