ReviewsSlide Hammer Puller Set

OTC 4579 9-Way Slide Hammer Puller Set , Black

OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs.
Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals.
Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.
Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.
Enjoy special OTC Tools promotions, offers, and exclusive product rebates on auto tools – see more details in the offer flyer in the photos section of this listing.

Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

... is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength and force while also providing longevity for th....

Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
You can save hundreds of dollars by using this one pilot puller.
VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
This blind hole bearing puller is built to last.
DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.

Check Stock

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
Front Hub puller, Rear Axle puller, Locknut Cone.
Dent puller screws (large and small), Supplied in blow mold storage case..
Features: Internal and External Three Leg and Two Leg jaw puller yokes..

Check Stock

Paintless Dent Puller Kit with 34pcs Glue Pull Taps Repair Dents in All Parts of The Car 2in1 Slide Hammer Dent Remover for Big Dents Bridge Dent Puller Repair Small and Medium Dents

Professional Pull Taps -This PDR tools set contains everything in the first picture,Come with 34pcs dent puller tabs,These are made in specific high....
2in1 Slide Hammer Dent Remover - 2in1 Slide Hammer is used with different size of the glue puller tabs for Paintless Dent Removal.Slide hammer is more....
100% Protect the Body Paint- DIY Paintless Dent Repair is the most cost effective method for removing car door dings hail dents Motorcycle Tank Dent....
Glue Removing Instruction:The car dent puller kit Including 20PCS of glue sticks.
In general, After fixing the dent,use alcohol to clean the extra....
Patented manufacturer:We are professional manufacturer,focus on quality is second to none.Every tool is meticulously inspected and certified for....

Check Stock

LainKeen Inner CV Joint Puller Front Wheel Drive Axle Half Shaft Removal Tool Kit with Heavy Duty 10 Pounds Slide Hammer, 63mm 48mm CV Joint Fork Adapter Attachments

Remove CV Axle Easily: Using the CV joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts..
Heavy Steel Slide Hammer: The slide hammer and the VC join fork is made of heavy duty steel, which can withstand huge pressure without deformation, is not easy to break. slide hammers are heavier and larger than normal ones, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, the length is 19.5 inches, so it can generate greater pulling force and work easier..
Efficient Slide Hammer: The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most veh....

Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components.
Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break.
Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently.
Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have....

Check Stock

18pc HD Heat Treated Dent Puller w/13lbs Slide Hammer Auto Body Shop Repair Tool

【High Performance】Sturdy steel shaft and knurled handle for a reassuring grip. Provides a strong pulling force that ensures that all your car dents pull out smoothly with minimal effort..
【High Qulaity】 Slide hammer dent puller set is constructed with heat-treated steel for extra strength and durability, for all pounding and pulling operations.
【Easy to Carry】 Comes with a durable plastic storage case, you can neatly collect the tools and easily bring them anywhere you like.
【Package Included】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector. Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector.

Check Stock

KELEN Blind Bearing Puller Tool, Blind Inner Internal Bearing Puller,Blind Hole Bearing Puller Set, Slide Hammer Removal Tool Set 5Pcs

The blind bearing puller is designed for removing out blind holes bushes and bearings from blind housings without any damage of your vehicles.You can do dent repair, lock pull or bearing pull on a scooter or any small machine..
Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts..
Bearing Extractor Collets With Internal Capacity From 3/8 inches (10mm) To 1-1/4 inches (32mm),15 inches (382mm) Overall Length..
Blind bearing puller, blind hole bearing puller,blind inner internal bearing puller,inner bearing puller set,blind inner bearing puller set,blind bearing puller kit,blind bearing puller set,blind bearing puller tool,blind hole bearing puller set,blind hole bearing puller kit..
Includes puller/slide hammer, 4 adapters 12 - 32 mm and carry case.Ideal Replacement for pulling jobs.Satisfaction d. If not completely satisfied, return it to us for a no-hassle refund or credit..
Part number: Blind Bearing Puller Tool 5PCS.

Check Stock

YIUIY Car Dent Repair Pullers Air Pneumatic Dent Puller Suction Cup Car Auto Body Repairing Slide Hammer Kit Hammer Tools Hand Tool

【FITMENT】:Slide hammer puller is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine..
【PREMIUM MATERIALS】:This slide hammer puller is made of galvanized steel materials, more tough is not easy to break,it is corrosion and oxidation resistance and will not hurt the car body, fits to more different dents..
【PROTECTS THE ORIGINAL PAINT】:Paintless Dent Repair Kit Pulls Dents Out Without Harming The Original Paint Which Gives The Panel A Higher And Longer Protection With Its Special Coating..
【PULL OUT DEEP & BIG DENTS EASILY 】:The Professional Air Dent Puller Produces Much Stronger Power Than An Adhesion One. Aims At Severe Dents Instead Of Small Pits..
【ESSENTIAL TOOLS FOR DENTS】:This pneumatic dent puller is an essential tool for pulling out dents from vehicles. The dents on cars can be simply removed by placing the suction cup over the dent on the panel and using the built-in slide hammer..

Check Stock

NEIKO 02236A Slide Hammer | 17 Pc Automotive Bearing Hub Puller Kit | Axle Seal Pulling

[APPLICATION]: Easily remove mechanical, press-fit parts (bearings, bushings, gears, pulleys, etc.) from a shaft.
[QUALITY]: 5-pound steel slide hammer constructed of chrome vanadium steel for smooth operation, improved durability, corrosion resistance..
[VERSATILE]: Full hammer kit, ideal for use on a wide variety of pulling applications, including pulling dents.
Fits many sizes of bearings, gears and....
[PERFECT FOR MECHANICS]: Includes an external 3-jaw puller, internal 3-jaw puller, external 2-jaw puller, internal 2-jaw puller..
[INCLUDES]: 5-lb hammer, shank, T-bar assembly, grip wrench adapter, dent puller, pulling (cone) adapter, seal hook in a Hard plastic blow-molded....

Check Stock