ReviewsSlide Kit

Mikuni Small Round Type Main Jets for BS Series CV Carburetor 145 4 Pack

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines..
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please EMAIL US FIRST through Amazon with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit..
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required..
  • Kit Includes: Main Jets, Pilot Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos..
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund..
Check Stock

Rotary 14845 Comfort Ride Mower Seat with Armrests

  • The ROP Shop replacement Seat Suspension Kit.
  • Specs - Mechanical Suspension. Suspension Stroke: 4". Slide Track Fore & Aft Travel: 6" center to center & 6.75" rail to rail. Weight Adjustment from 110lbs - 330lbs. Refer to images 2 & 3 for more information.
  • comes as shown in the first image (does NOT come with instructions or hardware).
  • This item is a universal suspension kit meant for flat mounting surfaces, but some units and models fabrication may be required for mounting on your machine, however we are unable to verify what applications would need fabrication. The fourth picture shows a schematic of the bolt pattern for mounting to the frame.
  • Long Lever (Black) is for the slide track. Handle Lever (Gray), in the middle, is for adjusting the weight. Star Shaped Knob (Gray) is to adjust the suspension up or down.
Check Stock

Prime-Line R 7210 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –15-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7210 kit features a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing..
  • EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website..
  • 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 16” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top..
  • A Phillips head screwdriver is required ....
Check Stock

YOOHE Auto Body Paintless Dent Removal Kit - Car Dent Puller Kit with Slide Hammer T-bar Dent Puller and Bridge Dent Puller for Car Dent Repair and Metal Surface Dent Removal

  • HIGH QUALITY - The car dent puller kit include a slide hammer T-bar dent puller and a silver dent puller. These dent puller made from high quality....
  • PRO 2 in 1 SLIDE HAMMER - Long T-bar dent puller tool is a labor-saving pulling mode via slide hammer hit to repair dents of all sizes with perfect....
  • WIDELY USE - Most pro & comprehensive paintless dent removal tools kit, totally has 43 pcs, including all the classic and popular dent puller tools.....
  • SO EASY TO OPERATE - Our dent puller kit coming with detailed repair steps introduction for operate, it make the dent removal process so easy. so it....
  • TECHNICAL SUPPORT - You will enjoy professional service center, 30-day full amount refunding, quality warranty and technical support. All products....
Check Stock

Prime-Line R 7212 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –19-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7212 kit features a self-closing design that commences at the final 2-1/2” from the end of the 19-3/4” long tracks when closing..
  • EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website..
  • 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 20” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top..
  • For all dimensional information please r....
Check Stock

Prime-Line R 7210 Drawer Slide Kit – Replace Drawer Track Hardware – Self-Closing Design –Fits Most Bottom/ Side-Mounted Drawer Systems –15-3/4” Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE – Whether you are installing new drawers or repairing one that won’t open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN – The smooth-gliding tracks in the Prime-Line R 7210 kit features a self-closing design that commences at the final 2-1/2” from the end of the 15-3/4” long tracks when closing..
  • EASY TO INSTALL – Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Line’s website..
  • 75 LBS MAX LOAD CAPACITY – The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 16” deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP – The clearance required between the drawer and the drawer opening for these slides is: 1/2” on left and right sides, 1/4” at the bottom and 5/8” at the top..
  • For all dimensional information please r....
Check Stock

Trombone T-Shirt - Funny Smart People Trombone Player

  • Wear this funny trombone t-shirt apparel outfit clothing accessory gift when using trombone shorty, stand, trombone derby straight plunger cup pixie practice mute, trombone slide lubricant or oil slide or grease stick, polish, trombone cleaning repair kit.
  • Makes a great trombone musical instrument player gift with trombone lesson music book, duets book, case, snake, trombone mouthpiece, leather guard or grip, cleaning rod, care kit,case, trombone pencil holder, lapel pin, paper clips, lyre clip, cork decal.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

RAVE Sports 00002 Dock Slide

  • The RAVE Sports inflatable Dock Slide keeps the kids and adults entertained for hours. No need to mess around with a heavy fiberglass slide, just inflate, attach to your dock and go!.
  • 9' dock slide for one user (up to 200 lbs.).
  • Includes attachment straps, repair kit, and 12 VDC inflator/deflator.
Check Stock

Kreg Tool Company - Drawer Slide Jig with Cabinet Hardware Jig with Concealed Hinge Jig and Two 2 Face Clamps

  • HARDWARE INSTALLATION KIT: Three easy-to-use Jigs plus two bonus Clamps in one specially-priced kit. With this hardware installation kit you can....
  • CONCEALED HINGE JIG: The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges.
  • CABINET HARDWARE JIG: The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls`.
  • DRAWER SLIDE JIG: The Drawer Slide Jig takes the guesswork out of installing drawer slides.
  • CLASSIC 2-INCH FACE CLAMP: Classic 2-Inch Face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other....
Check Stock

Portable Air Conditioner Window Kit | AC Window Kit Seal For AC Hose With 5.9 Diameter | Window Vent Kit With Air Conditioner Window Exhaust Panel | Sliding Window Casement With Window Duct Adapter

  • COMPATIBLE DESIGN – Our portable ac window vent kit comes in a universal design compatible with window dryer vents and a portable air conditioner....
  • VERTICAL AND HORIZONTAL – Looking for a sliding door air conditioner kit that works with vertical and horizontal sash windows? Look no further…add....
  • SAVE ENERGY – Our portable air conditioner window vent kit diffuses hot air out of the window, preventing warm air circulating in your room - saving....
  • SLOT, SLIDE AND LOCK – Our new easy portable air conditioner window exhaust is super easy to install. Slot each panel together and slide them to the....
  • WONDERFUL WINDOW KIT – Our window vent kit is perfect for any commercial cool air conditioner. We truly believe our plastic window seal is the best....
Check Stock

Prime-Line R 7211 Drawer Slide Kit Replace Drawer Track Hardware Self-Closing Design Fits Most Bottom/ Side-Mounted Drawer Systems 17-3/4 Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE Whether you are installing new drawers or repairing one that wont open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN The smooth-gliding tracks in the Prime-Line R 7211 kit features a self-closing design that commences at the final 2-1/2 from the end of the 17-3/4 long tracks when closing..
  • EASY TO INSTALL Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Lines website..
  • 75 LBS MAX LOAD CAPACITY The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 18 deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP The clearance required between the drawer and the drawer opening for these slides is: 1/2 on left and right sides, 1/4 at the bottom and 5/8 at the top..
  • For all dimensional information please refer to the line art and compare to you....
Check Stock