ReviewsSlide Shaft

Fulton 142410 Dual Speed Winch - 2600 lbs. Capacity, 1 Pack

2, 600 lb. Capacity two-speed winch one fast speed for quick pull-in, a second low speed for increased mechanical advantage 10 inch 'comfort grip' handle.
Shift lock design allows changing gears without moving the crank handle from shaft to shaft, just Lift the shift lock and slide the shaft into the desired gear position.
Neutral free-wheel position allows quick Line pay out without spinning the handle optional handbrake kit no. 501201 (sold separately) can be installed after the winch is mounted.
High-carbon Steel gears for superb strength and long-term durability stamped carbon Steel frame provides rigidity, important for gear alignment, and longer cycle life.
Designed for use with 2 inch straps up to 20 feet long.

Check Stock

Cajun Bowfishing Fiberglass and Carbon Infused Arrow with Piranha Long Barb XT Point, Red, One Size

Improved shaft design made with a fusion of black carbon-fiber and red fiberglass.
Includes shaft with point includes nock, slide, and stop.

Check Stock

Archery Fiberglass Bowfishing 32 inch Arrows with Broadheads and Safty Slides for Compound Bow or Recurve Bow Fishing Hunting Outdoor Shooting 3 PCS Pack

32 inch Solid Fiberglass Shaft, 34.4 inch Length in total, 8mm O.D. Shaft with Safety Slide & Stopper..
High quality smooth fiberglass shaft construction,very durable for better flight characteristics and higher accuracy..
Installed broadheads and safty slides,Increased accuracy in archery good choice for bowfishing activity..
Suitable for recurve bow & compound bow & long bow outdoor shooting..

Check Stock

7BLACKSMITHS Moose ATV UTV Snow plow Shoe Skid Snowplow(1 Pair of Replacement)

Heavy Duty replacement Snow Plow：Made of high strength heavy steel plate, may work on other Snow Plows with 5/8" shaft size..
Function: Shoe is a Wide 3-1/2", the snow plow shoe slide rail reduces the stress on the blade by absorbing the initial impact with the ground, helping to minimize the wear and damage of the blade..
Material: Strong construction with powder coated, anti-rust, promote smooth surface and prolong durability..
Condition: Total Height: 7" Shaft Size: 5/8" Shoe width: 3-1/2".Our skid shoes has the shaft welded to the shoe, you won't lose it..
Package Listing: Sold as a pair,with lynch pins included..

Check Stock

Fulton 142430 Dual Speed Winch with Hand Brake - 3700 lbs. Capacity, 1 Pack

3,700 lb. capacity two-speed winch with brake one fast speed for quick pull-in, a second low speed for increased mechanical advantage 10 inch ‘Comfort Grip’ handle.
Shift lock design allows changing gears without moving the crank handle from shaft to shaft, just lift the shift lock and slide the shaft into the desired gear position.
Neutral free-wheel position allows quick line pay out without spinning the handle built in hand brake adds convenience and safety.
High-carbon steel gears for superb strength and long-term durability stamped carbon steel frame provides rigidity, important for gear alignment, and longer cycle life.
Designed for use with 7/32 inch cable up to 90 feet long – not for use with straps.

Check Stock

Kreg KBC6 Automaxx Bench Clamp, 6 Inch

..., sanding, planing, sawing, drilling, and finishing.
Protect softwood from marring by using a piece of scrap wood as padding between your holdfasts and the workpiece.
USE WITH YOUR WORKBENCH: Works best on workbenches with a 2.5 (6.4cm) thickness.
Drill 3/4 inch (1.9cm) vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole.
We suggest filing the shank to increase hold security.
PERFECT SIZE FOR YOUR NEEDS: Constructed of drop-forged steel provides these hold fast clamps with maximum durability and strength.
8-inch(20.3cm) length with 3/4-inch (1.9cm) diameter shaft fits your workbench.
Shepard hook design offers a 4-inch (10.2cm) perimeter reach for versatility.
Hook features 1.3 by 1.3-inch (3.3 x 3.3cm) square end that will not mar your workpiece.
QUICK AND EASY CLAMPING: Slide the bench hold down clamp into your workbench dog hole.
Press the tip of the hook against your workpiece and firmly tap the crook of the holdfast with a wooden or rubber mallet to jam the shaft tightly in the hole.
When you are ready to release the clamp, strike the backside of the vertical shaft to unjam it from the hole.

Check Stock

ABN Slide Hammer Puller Set - 5 lb Slide Hammer Axle and Hub Puller and Dent Remover Unit Auto Body Hammer Tool

[Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders.
Lightweight dent puller slide hammer tool ensures maximum pull power.
[Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut.
3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included).
[Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool.
Then, pull back on the T handle, while you snap the weight towards the handle.
Weighted slide hammer adds torque and pull-power.
[Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts.
[Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper gr....

Check Stock

3Pcs Bowfishing Arrows Fiberglass Solid Arrows with Fish Hunting Broadhead

➹High Quality Fishing Broadhead, with 2 mechanical barbs ,desing offers over 2.5″ of holding area and releases by loosening the tip..
➹32 inch Solid Fiberglass Shaft, 34.4 inch Length in total, 8mm O.D. Shaft with Safety Slide & Stopper..
➹Compound & Recurve bows & Long bows , fit for fish hunting, target practice & outdoor shooting..
➹Packaged of 3 pieces fishing arrows, comes with 2 years warranty, money back or replacement is available..

Check Stock

Wheel Marking Gauge,Adjustable Stainless Steel Woodworking Marking Gauge for Woodworking,Woodworking Marking Scriber Kit Double-Shaft

【SUITABLE FOR WOODWORKING】Single-shaft scriber is with laser scale supports fine adjustment distance for accurate scribing..
【TIGHTENING ADJUSTMENT】Carpenter scriber comes with tightening adjustment, such marking tool uses the withdrawal tool to adjust the tightness and....
【ADJUSTABLE WHEEL MARKING GAUGE】 Marking Tool Supports single-shaft and double-shaft adjustment, it can meet different needs..
【STAINLESS STEEL WOODWORKING MARKING GAUGE&CORROSION RESISTANCE】Stainless steel slide bar is rust-and-oil-proof, which can keep longer life for....
【QUALITY ASSURANCE】We have strict control over the quality of each product to ensure that every product you buy is certified. If you have other....

Check Stock

DCT Bench Holdfast Woodworking Tools – 8in Bench Holdfast Clamps Woodworking Bench Holddown Clamps 2 Pack

..., sanding, planing, sawing, drilling, and finishing.
Protect softwood from marring by using a piece of scrap wood as padding between your holdfasts and the workpiece.
USE WITH YOUR WORKBENCH: Works best on workbenches with a 2.5 (6.4cm) thickness.
Drill 3/4 inch (1.9cm) vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole.
We suggest filing the shank to increase hold security.
PERFECT SIZE FOR YOUR NEEDS: Constructed of drop-forged steel provides these hold fast clamps with maximum durability and strength.
8-inch(20.3cm) length with 3/4-inch (1.9cm) diameter shaft fits your workbench.
Shepard hook design offers a 4-inch (10.2cm) perimeter reach for versatility.
Hook features 1.3 by 1.3-inch (3.3 x 3.3cm) square end that will not mar your workpiece.
QUICK AND EASY CLAMPING: Slide the bench hold down clamp into your workbench dog hole.
Press the tip of the hook against your workpiece and firmly tap the crook of the holdfast with a wooden or rubber mallet to jam the shaft tightly in the hole.
When you are ready to release the clamp, strike the backside of the vertical shaft to unjam it from the hole.

Check Stock

Parts-Diyer Dent Puller w/Slide Hammer Set Replacement for Automotive Auto Body Truck Repair Tool Heavy Duty

EASY DENT FIX: The paintless dent repair kit quickly fixes dents on most vehicles without needing specialty tools.
Innovative slide hammer with dent removal kit makes dent pulling easy and effective.
HELPFUL ATTACHMENTS: The dent puller paintless dent repair set comes with versatile attachments to help pull dents in hard-to-reach places.
Car dent removal tool set allows you to pull dents on doors, bumpers, hoods, and more.
HIGH-QUALITY MATERIAL: The dent repair puller set is made from high-quality steel that resists rust and corrosion.
Materials in universal dent remover tool set won’t bend or break.
Slide hammer dent puller set is made for heavy-duty use.
TRANSPORTABLE: Paintless dent repair tools come in a sturdy, blow mold case for added protection and transportability.
Dent remover for cars set is perfect for the mechanic or serious DIYer.
INCLUDED: The set comes with 12 lb. slide hammer, slide hammer shaft, slide hammer handle, slide hammer adapter, deep hook, short hook, door edge tool, claw, straight driver, hook and chain, sheet metal screw and holder, and nose piece with screw.

Check Stock