ReviewsSliding Door Handle

11 inch Antique Solid Heavy cast Iron Door Handle Door Pull barn Door Handle Gloves, Outdoor, Garage, Wardrobe, Indoor Black

  • 1. Size: Overall size: 11 inches long * 3/4 ​​inches wide. Hole to hole center: 9 1/2 inches. Total height from mounting surface to top of handle: 1 7/16 inches..
  • 2. Multifunctional-This high-quality black barn steel door handle can be used for doors, doors, garages, barns, sheds, closets, sliding doors-exterior and interior. It is designed as a luxurious high-end facility for indoor home decoration and enhances the rustic charm of large barn doors, gates, sheds or garages.
  • 3. High quality-This handle is made of high quality carbon steel, which is very strong on any door. Can be used as interior or exterior barn door handle, sliding door handle, door or garage door handle, wardrobe door handle, etc. It is made of high-quality steel and black powder, and comes with two matching colored screws..
Check Stock

Sliding Glass Door Handle Set Oak Wood Interior Handle and Exterior Pull White Diecast Finish+Mortise Lock 45° Keyway Fits 3-15/16” Screw Hole Spacing, Non-keyed with Latch Locks(White)

  • ☛【 COST EFFECTIVE TO REPLACe OLD OR BROKEN DOOR HANDLES】: When your door handle is broken, old or unsightly, don’t replace the door entirely, just get a new sliding patio door handle set! Our replacement patio door handle set is the most economic and useful you can find..
  • ☛【INCLUDES】: Interior Handle, Exterior Pull,Mortise lock, Thumb Latch, 6XScrews. Standard reversible, non-handed handle set that can be mounted on both left-handed and right-handed sliding patio doors. 45° Mortise latch lock which can be used on sliding patio doors constructed of wood, aluminum and vinyl.You don't need to buy other components if you get our handle set..
  • ☛【EASY INSTALLATION】:This is a DIY project in the box. For handles with 3-15/16” hole spacing & a Mortise (Latching style) lock. Remove 2 screws from existing handles, insert Latch, align inside and outside handles with Pre-drilled door holes, insert screws, tighten and your done. Includes 6 screws with 3 different sizes: Large 2.16.
Check Stock

EASILOK Sliding Patio Door Handle Set with Mortise Lock, Heavy Duty Replacement Sliding Glass Door Handle Set, Fits Door Thickness from 1-1/2" to 2-4/25", 3-15/16”Screw Hole Spacing, Non-Handed

  • ...is is an easy-to-do DIY project in the box with full accessories. The pin only install to the thumb latch,no need to cut. With a Perfect instruction manual and Open hole template, Resolve any problems you may have with the installation.
  • Unique & Heavy Duty Design - The sliding door handle set adopted matte white powder coating surface treatment make it more resistant to corrosion and a new designed handle shape easy to grasp and more comfortable hand feeling . The glass door handle made of high quality aluminum alloy with greater bulk design, stronger and more durable..
  • Includes - This sliding patio door lock set includes interior handle, exterior pull, mortise lock, thumb latch, 6 of crews. It's a complete replacement set for replacing the handle lock on sliding patio doors..
  • Wide range of application & upgraded 90° mortise - Suitable for a wider range of door thickness from 1-1/2" to 2-4/25", including 6 screws are 3 different sizes fit different door thickness: Large 2.4"/Medium 1.96"/Small 1.65".
  • The upgraded 90° mortise lock improved the issue of locking difficulty, easy to ....
Check Stock

Barn Door Handles 2 Pack 12 inch - Barn Door Handles Black Barn Door Handle Double Sliding Barndoor Hardware Bard Plate - Barnwood kit, Inset Knobs Finger Flush Pulls Barnyard Barb Latch Closure Pull

  • ...rn door handles set] come with 1 x round barn door handle pull, 1 x flat finger pull, 2 x screws (L: 2-3/8”), 2 x pad (Diameter: 1-7/8”), 2 x Hex Key wrench. (Door NOT included). 1 x Barn door lock (or barn door latch) is included with barnwood door hardware kit as bonus to secure the barn door pulls. Enjoy the sliding barn door handle with years to come..
  • [Black barn door handles and pulls] can be used indoors and outdoors, for barns, doors, gates, garages, sheds, closets, sliding doors. Bar door pull is sturdy yet stylish and elegant. The modern slick design allows barn door handle black to be used as a luxury addition to your interior home décor as well as the rustic charm to your barn, door, gate, garage, shed and closet..
  • [Easy Installation] To install bard door handle, drill two holes in the door, slide the two bolts through and tighten black barndoor handle with the included big hex key. If the Handle pillar is not tightened or needs to be removed, use the included small hex key. This barn door handle and pull set can be used for left or right handed applications..
Check Stock

12 inch Barn Door Handle Retro Gold - Handmade Rustic Sliding Barn Door Pull Flush Handles with Hook Lock Latch Set, Barn Door Gate Garage Hardware Kit

  • ✅ 【 GOLD BARN DOOR HANDLES SET 】 Come with 1 x Round Pull Handle, 1 x Flat Finger Pull, 1 x Hook Lock, 1 x Eye Latch, 2 x Washer, 6 x 1" Screws, 4 x 3/4" Screws. And enjoy the sliding barn door handle with years to come. * Only the hardware is for sale, DOOR NOT INCLUDED..
  • ✅ 【 NO DRILLING & ONLY SCREWS 】 The pull handle and finger pull can be installed independently (with screws only), so there is no need to drill holes to combine them. And the finger pull back plate is only 1/4" (6mm) thick and almost sits flush to the door, no rectangular holes need to be cut..
  • ✅ 【 SOLID CONSTRUCTION 】 Made of high quality carbon steel, with antique gold powder coating surface finish. Handle set can resist to rust, corrosion and deformation for years. Comfortable feel, no fingerprints will be left, and without sharp edge..
  • ✅ 【 PROFESSIONAL BARN DOOR HANDLES AND PULLS 】 It is perfect installed on interior or exterior doors. Rustic elegant design is great for sliding barn door, closet, kitchen pantry door, attic space door, porch door, interior door, shed, gate, garage, or pocket doors..
  • ✅ 【 PRODUCT PARAMETERS 】 FINGER PULL SIZE - L8 5/8" x W 2 3/8" x H 1/4" (Depth 1/4").
  • PULL HANDLE SIZE - L 12" x H 2 3/4" (Depth 2 3/4").
Check Stock

(All-New) Haritoft 12\ Sliding Barn Door Handle Pull and Flush Hardware Set, Flat Back-Plate Design, Rustic Black

  • Innovation Design: Flat finger pull back plate, flush with door surface without gap, finely brushed by hand without sharp edge..
  • One Minute Install: Includes worry-free installation drill template to provide accurate installation. Also, online installation video tutorials on how to correctly install your sliding barn door handle set are available..
  • Handle Set on Door Two Sides: Exterior round pull length 12” diameter 1”, interior flush pull width 2 3/8” length 8 3/4” recess 1/4”..
  • Door Thickness Range 1” to 1 3/4”: Made of high quality iron and coated with long lifetime powder provides perfect uses for interior and exterior doors, wood or aluminum doors, sliding barn doors, garage doors, pocket doors and more..
  • Package include: Round pull 1x, finger pull 1x, screw 2x, Allen key 1x, installation guide 1x, drill template 1x, and easy lifetime protection for your sliding barn doors handle hardware kit..
Check Stock

J JHOUSELIFESTYLE Rustic Barn Door Handles Black - 10 Inch Flush Barn Door Handle and Pulls with Lock Hook Latch Sets, Great Large Sliding Barn Door Pull Handle Barn Door Pull Handles for Barn Doors

  • MORE STURDY. The black barn door pull handle made of 5 mm solid steel with powder coating surface finish, is smooth and unti-rust, and come with heavy duty screws, so you dont worry any loosen and corrosion after several years using.
  • 5 MINUTES INSTALL. No need cut or drill holes on doors for installing, no need line up for double side install, it will take 5 minutes to install barn door handle and lock sets.
  • PROFESSIONAL BARN DOOR PULLS AND HANDLES. Black barn door handle great for sliding barn door, closet, kitchen pantry barndoor, attic space door, porch door, interior door, shed, gate, garage, or pocket doors.
  • SPECS. Our modern barn door handle hardware with large size 10 inch in length, 1 inch in width, and flat flush pull door handle with a length of 7.3 inch, width of 2.3 inch, wall thickness of 5mm.
  • RISK FREE SHOPPING. Our sliding barn door handle black with exquisite craftsmanship and dull black powder coating finish with sandpaper like texture, is real rust resistant, more heavy duty more sturdy, so that it stays with you many years, or we’ll replace it hassle-free at no charge to you.
Check Stock

SUNNY SHOWER Double Sliding Shower Door with 1/4 in. Clear Glass Corner Shower Stall, 2 Fixed Clear Glass Panels, 36 in. x 36 in. x 72 in. Matte Black, Shower Base Not Included

  • ☀ Double Sliding Glass Door – Includes 2 fixed and 2 sliding panels. With 2 long handle plates instead of ordinary short glass door handle, sliding the doors more conveniently.
  • ☀ Shower Enclosure Size – 36 in. W x 36 in. D x 72in. H (Width adjustment range: 35"-36"). Walk-in width: 21.4".
  • ☀ Black Screen-printing Decoration– Outside glass panel adopts screen printing process and shaped with square grid, makes shower door more elegant. Touching the surface, no foreign body feeling.
  • ☀ Magnetic Door Bottom Seal Strip – Glass door waterproof seal strips make the door closed more tightly, prevent water leaking out.
Check Stock

Door Smoocher Child Pet and Baby Proof Sliding Pocket Door and Swing Door Lock

  • Child Baby and Pet Proof Sliding Pocket and Swing Door Lock for kids, toddlers, dogs and cats.
  • Easy install in minutes. Package includes latch handle, latch catch, drill bit with screws, spacers, placement tape and how to install instructions..
  • Latch will not damage door face. Lock and unlock sliding pocket door from both sides. Place lock to any height..
  • Lock works best if door kept locked when not in use. Lock very difficult to break in locked position. Lock can break if door slammed back when opened. Please contact Seller through Amazon with any problems or product questions..
  • Fits interior sliding pocket door up to 1 1/2". Swing doors require gap of 1/4" between door and door frame..
Check Stock

SUNNY SHOWER Sliding Shower Door with Shower Base Corner Shower Enclosure 36 X 36 X 72 inch, Semi-Frameless Shower Door with 1/4\ Clear Glass, Black Glass Door & White Base

  • ☀ Square Shower Enclosure – Install shower enclosure in the corner of your bathroom, saving the space. The framed square shape also makes it more sturdy and stable.
  • ☀ Shower Glass Door Size – 36" W x 36" D x 72" H (Width adjustment range: 35"-36"). Walk-in width: 21.4".
  • ☀ Bypass Sliding Shower Door –2 shower panels can sliding. Comes with 2 long glass door handle plates instead of ordinary small door handle, makes sliding more smoothly.
  • ☀ Non-Slip Shower Base – Anti-slip granules design in shower base surface, prevent you falling while bathing, your bathroom will looks more modern also.
  • ☀ Magnetic Seal Strip –Magnetic glass door seal strips make the door closed more tightly and waterproof, prevent water leaking out.
Check Stock

Ranbo 71 Inch Heavy-Duty Commercial Grade-304 Stainless Steel Modern Contemporary Entry Door Handle Bar Ladder Pull Shower Glass Sliding Barn Door Interior Exterior Door Pull Push, Matte Black Finish

  • FLEXIBLE APPLICATION: Ranbo CONTEMPORARY, MODERN door pull/handle designs guarantee to bring out the elegance of your home. Perfect as door pull entrance/entry handle, push pull door handle bar, bathroom glass door pulls, shower door handle, sliding barn door pull handle, on big/large interior or exterior front door, shops, kitchen door, gate, wine cellar, shed/garage. Mountable on wood door, glass door, fiberglass door, metal door, etc..
  • Quality 1.2mm Wall thickness, high-endurance grade-304 stainless steel Handle Grip, Solid grade-304 Stainless Steel mounting standoffs offer a 4.6mm/0.18" efficient deepest engagement length with 4 SUS304 hexagon socket set screws. Ranbo MBH-1887 series SUS 304 push pull handles feature a distinctive and durable structure with strong resistance to rust, corrosion, and deformation for an everlasting lifespan without looseness, let every of your dollar have the highest cost performance..
  • Finished in perfect matte black with chamfered edges to avoid any unexpected accidental injury, Ranbo MBH-1887 71"/1800mm size provides a Grip/Handle length of 1800mm/70.87 inches, hole to hole distance 1500mm/59.06 inches, Mounting Standof....
Check Stock