ReviewsSlip Joint Exhaust Clamp

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

2PCS Exhaust Clamps 3 Inch Butt Joint Exhaust Pipe Muffler Clamp Band Stainless Steel Connection for Cars

  • Size: We offer you 2pcs exhaust clamps, which you can measure better before you buy. These fixtures feature a unitary construction that minimizes part count and maximizes material efficiency and weight..
  • Material: The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket exhaust systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • Flexible Disassembly and Repair: The butt strap clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Save Time and Effort: Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Satisfied Customer Service - Both product quality and payment, will always be guaranteed. We are responsible sellers, always providing high quality products a....
Check Stock

Roadformer 5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel (2 Pack)

  • 2 PIECES IN PACK – 5 inch Lap Joint exhaust clamp is made in high quality standard aluminized steel, used for 5 inch OD to ID exhaust system connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is using 12.9 degree high-strength fastener providing real sealing capability of leakage free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, new engineering design provides fast, easy and accurate installation..
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

ESPEEDER 3.0 Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 3.0" OD Pipe to 3.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs.....
  • The lap joint clamps 3.0" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat....
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without....
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" lap joint band clamp, you can feel free to contact us via....
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Roadformer 4 Lap Joint Exhaust Band Clamp - Preformed Stainless Steel Used to Seal Muffler Insets Outsets Elbow Joints Flex Pipes and Other Exhaust System Connection

  • Roadformer 4" exhaust clamp is to joint 4" OD pipe overlapping into 4" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
  • Roadformer stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
  • Roadformer does dedicate in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Q1-TECH, Universal 4' Burnt Tip JDM N1 Style Muffler Hi Flow Stainless Steel Weld-On 2.5' Inlet , Muffler , Removable Silencer Pre-attached , Deep and Smooth tone

  • ✅Fitment: Universal fit for all 2.5 inch exhaust pipe, as long as your exhaust pipe is 2.5 inch ,it would fit . and easy to install, bolts on in minutes. You can choose Butt joint, Lap joint, or muffler seal clamp ,U bolt clamp..
  • ✅Feature: Polished stainless steel, The muffler is 2.5 inch inlet, 4 inch outlet, 19 inch length just need to measure the inlet of your car before purchase..
  • ✅Straight-through muffler design reduces back pressure while absorbing sound waves Made from the stainless steel for long-lasting durability..
  • ✅Function: A muffler is used near the end of the exhaust system on a vehicle, work on the principle of destructive interference and absorption. The walls of the muffler are made of two layers of stainless steel, which help reduce vibration and absorb sound..
  • ✅Package includes: 1 x Exhaust Muffler, Includes removable silencer OUTLET TIP 4", INLET TIP 2.5".
Check Stock

Roadformer 5" Butt Joint Exhaust Clamp - Aluminized Steel for 5 inch OD exhaust pipes, muffler ends and exhaust system connection with leakage free (2 Pack)

  • 2 PIECES IN PACKAGE – 5 inch butt joint exhaust clamp is made in high quality Aluminized Steel, it is used for 5 inch OD pipes & muffler ends connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, New design provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 560 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

Pack of 2 Butt Joint Narrow Band Exhaust Seal Clamp Muffler Clamp Band Stainless Steel Connection for Cars (2IN)

  • The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket car systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
  • The butt strap clamp is a simple and effective way to connect car system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
  • Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
  • Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
  • Maximum Diameter: 2", Band Width: 1 1/4" (1.25").
Check Stock

LTI 2.75 inch Butt Joint Exhaust Band Clamp 304 Stainless Steel for 2.75 OD to 2.75 OD Exhaust Pipe Connection 2.75 Inch

  • LTI 3" Length exhaust clamp is Made in Full 304 Stainless Steel Over 100 hours salt spray test to ensure the great performance in anti-corrosion.
  • Universal fitment Butt Joins 2.75" OD Pipe to 2.75" OD Pipe, we also provide many different sizes to fulfill your needs. Full clamping area to create....
  • The butt joint clamps are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back....
  • No welding design makes lap joint clamp fast, easy and accurate installation. it is removable and reusable, easy to install without welding.
  • LTI provide 12 months warranty from the date of purchased. We value your shopping experience and strive to offer a high-quality product and service.....
Check Stock