ReviewsSlitting Saws

SUIZAN Japanese Pull Saw Hand Saw 9.5 Inch Ryoba Double Edge Flush Cut Saw Woodworking tools

  • JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cut through a pushing motion. On the other hand, Japanese saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN woodworking tools are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your life!.
  • Since each handle is individually wrapped by hand by craftspeople, its appearance may vary from one to another. Cracks may occur during the manufacturing process. It is not a defect..
Check Stock

Mercer Industries GNSI62-12-Piece Swiss Pattern Needle File Set Medium Cut 6-1/4

  • Contains 1 of each 6-1/4" Medium Cut Needle File: Barrette, Crossing, Equaling, Flat, Half Round,.
  • Joint, Knife, Marking, Round, Slitting, Square and Three Square.
  • Primarily used by jewelers, watchmakers, and fine tool and die makers.
Check Stock

SUIZAN Japanese Flush Cut Saw Small Hand Saw 5 Inch Pull Saw for Hardwood and Softwood Woodworking tools Trim Saw

  • JAPANESE STYLE PULL SAW: This flush cut saw is a “Pull Saw.” Most people are used to European saws, called “push saws,” which cuts through a pushing motion. On the other hand, Japanese hand saws cut materials via pulling and are called “pull saws.” In comparison to “push saws,” this Japanese product is lighter in weight, requires less power, and results in a cleaner edge..
  • JAPANESE STEEL: All SUIZAN Japanese saws consist of top quality Japanese steel. The high-quality steel makes razor sharp cuts..
  • MADE IN JAPAN: All SUIZAN woodworking tools are manufactured in Japan by Japanese master craftsmen. The whole process of making these tools are completed in one of Japan’s towns known for its craft-making tradition with a history of over 100 years..
  • BLADE FOR HARDWOOD AND SOFTWOOD: With this small hand saw, you can easily cut oak, sandalwood, ebony, mahogany, maple, walnut and pine with a robust blade for hardwood. The blade for softwood can be used for white cedar, Japanese cedar, larch, paulownia wood and many others..
  • DIVERSIFY YOUR WOODWORKING LIFE: No matter if you are a master or a beginner, using traditional Japanese-style saws gives you a brand new experience and lets you make a wider range of woodworking products, thus changing your ....
Check Stock

Concord Blades WCB1400T120HP 14-Inch 120 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

  • Professional quality, construction grade for ripping & crosscutiing of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick.
  • For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 4,000.
  • Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood..
  • Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required..
  • 3.0 mm kerf design, ATB Grind & 15Degree hook.
Check Stock

MASTEC 8 Inch 64 Tooth Circular Saw Blade Anti Kickback Tooth for Wood Cutting with 5/8-Inch Arbor

  • 【Application】:Fast smooth clean cutting and widely used in Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws..
  • 【ATB Tooth】:Alternate Top Bevel Teeth blade ideal for cutting all kinds of wood.Such as Hard Wood,Soft Wood,Plywood,Chipboard..
  • 【Anti-Kickback Shoulder】:For safety reasons,preventing inversion of saw blade during cutting..
  • 【Specification】:8 inch 64T fine finishing wood cutting blade with a 5/8 inch arbor..
  • 【Good Service】:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours..
Check Stock

Whirlwind USA MGSB 7 1/4 Inch 60 Teeth Circular Saw Blade for Wood,Carbide Cordless Miter/Table Saw Blade,7/8-5/8 Arbor

  • High quality and professional grade for ripping and crosscu tting of thick hardwood to 3-1/2" thick and softwood to 1" thick..
  • The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws..
  • Ideal for cutting hardwood, softwood, exotic wood and abrasive wood..
  • Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure..
Check Stock

Grobet USA Swiss Pattern File Pillar Extra Narrow 6 Inch Cut 4

  • The 4" (10 cm), 5-1/2" (14 cm) and 6-1/4" (16 cm) sets consist of one each barrette, crossing, equalling, half-round, joint round edge. knife, marking, round, slitting, square, three-square, and warding. The 7-3/4" (20 cm) sets consists of two each half-round, round and three-square and one each barrette, crossing, equalling, knife, square and warding. Cut portions are 4" files are 1-3/4.
Check Stock

F&D Tool Company 56105 Slitting and Slotting Saw Arbors, 5/8\ Hole Diameter, 3/4\ Shank Diameter, 1\ Arbor Diameter, 3-1/2\ Overall

  • Hole Dia: 5/8 - Shank Dia: 3/4 - Arbor Dia: 1 - Overall: 3-1/2.
  • Standard Arbor tolerance is .002" Premium Arbor tolerance is .0004".
Check Stock

Slitting/Slotting Saw Holder with Circular Saw Blade Machine Tools R8 Shank 7/16 UNF

  • Made of Quality Tool Steel. Available in Various Shank Sizes & Drawbar threads.
  • Slitting saw arbor Holdes can readily accept Saw Blades of Hole Diameter 1/2", 5/8", 3/4", 7/8", & 1"..
  • The blades are firmly secured in position with a Hex head screw ..
  • Supplied with HSS (M2 Grade) Circular Saw Blade (Size 63 mm Diameter x 1 mm Thickness x 16 mm Bore).
Check Stock

F&D Tool Company 56003 Slitting and Slotting Saw Arbors, 1/2\ Hole Diameter, 1/2\ Shank Diameter, 3/4\ Arbor Diameter, 3-1/16\ Overall

  • Hole Dia: 1/2 - Shank Dia: 1/2 - Arbor Dia: 3/4 -Overall: 3-1/16.
  • Standard Arbor tolerance is .002" Premium Arbor tolerance is .0004".
Check Stock

F&D Tool Company 56006 Slitting and Slotting Saw Arbors, 1\ Hole Diameter, 3/4\ Shank Diameter, 1-1/2\ Arbor Diameter, 3-3/4\ Overall

  • Hole Dia: 1 - Shank Dia: 3/4 - Arbor Dia: 1-1/2 - Overall: 3-3/4.
  • Standard Arbor tolerance is .002" Premium Arbor tolerance is .0004".
Check Stock