ReviewsSlotted Countersunk Head Screw

4 PCS 90 Degree Angle L Shaped Shelf Bracket with 24 Pcs Screws and 8 Pcs Anchors, Corner Brace Joint Bracket Fastener, 5 x 3Inch Floating Shelves Bracket Support Wall Hanging, Black, Metal

Wide Application:These angle brackets can be used to mount furniture,small bookshelf, build a frame,cabinets, wooden table, device or support/fix wooden board on the wall, etc..
Countersunk:Screw holes are countersunk,the head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance..
Package included: 4 x Shelf Bracket, 8 x Plastic Anchor, 24 x Screws.
Lifetime guarantee – With our unbeatable LIFETIME warranty and 30 day 100% Satisfaction Guarantee, buy with confidence! Click on the “Add To Cart”” Button NOW!”.

Check Stock

Witlans Chicago Binding Screws Assorted Kit,90 Sets 304 Stainless Steel Phillips Chicago Screw Binding Post Screw Kit for DIY Leather Decoration Scrapbook Photo Albums Bookbinding 9 Sizes

Package Included:90 sets(180pcs) slotted phillip head binding screws in a transparent plastic box.
9 sizes(M5*6/8/10/12/15/20/25/30/35mm),10 sets each size(90 tops+ 90 screws).
Various Size: Each set of round cross head chicago screw includes 2 parts, a screw post and a screw top.9 sizes of screw posts: length are 6 /8 /10/12/15/20/25/30/35mm.
Quality Material: The binding post screws are made of 304 stainless steel, strong screws with high hardness, high toughness,resistant to rust,wear-resistance,anti-corrosion, anti-oxidation.
Easy to Apply: High hardness, easy to binding, good tightness,easy to install and remove, standard slotted head, easy to instal and remove with any standard screwdriver repeatedly.
Multipurpose: The chicago screw buttons are used for book binding, scrapbooking, brochures, photo albums and DIY leather craft projects.

Check Stock

100 Qty #12 Stainless Steel Countersunk Finish Washers | 304 SS Finishing Cup (BCP576)

The countersunk head screw gasket is made of pure copper, which is not easy to rot, moisture, and oxidation..
These screw washers are small in size, light in weight and easy to install and use..
This screw washer is precisely matched, and the bearing exterior of the bolt is large, and the lock is firmer..
These screw washers have standard concentricity, smoothly exterior, concentric..
Can be installed on many different types of materials. Wide range of applications..

Check Stock

4 PCS L Shelf Brackets 6.9Inch, Stainless Steel 6.9x4 Inch Heavy Duty L Shape Corner Brace, Sliver Floating Shelves Bracket for Hanging DIY Shelving or Bookshelf, 3mm Thick Angle Joint Bracket Fastene

【Premium Material】Sliver shelf brackets made of stainless steel with exquisite technology, durable and rust proof.
【Bracket Size】175x 100 x 45 mm (L x H x W) / 6.9 x 3.9 x 1.77 inch.
Tickness:3 mm/0.12 inch； Hole Quantity: 5 holes.
【Wide Applications】The L shape shelf bracket can be used in a variety of furniture and hardware accessories, perfect for Hanging DIY Shelving or Bookshelf, mounting furniture, support/fix wooden board on the wall, etc..
【Countersunk Screw】Screw holes are countersunk design.
The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance.
【Package Include】4Pcs Angle joint bracket fastener, meet your daily requirements to make furniture parts stay firm.

Check Stock

20 PCS Black L Bracket, 50mmx50mmx19mm Stainless Steel Heavy Duty Corner Brace Joint Fastener, 90 Degree Angle L Shaped Shelf Bracket for Wood, Shelves, Furniture, Cabinet and More

◆Wide Application:These angle brackets can be used to build a frame, serve as a corner connected, like fastening chair, wooden table, wooden bed, windows, shelf, furniture, device etc.
SIZE: 50 x 50 x 19 mm (L x H x W) / 2 x 2 x 0.75 inch.
Lifetime Guarantee – With our unbeatable LIFETIME warranty and 30 day 100% Satisfaction Guarantee, buy with confidence! Click on the “”Add To Cart”” Button NOW!”.
Premium Material:Stainless Steel , anti-rust ,anti-corrosion also aesthetic.Thickening Design. Sturdy and Durable.
Countersunk:Screw holes are countersunk,the head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance..

Check Stock

M2 x 40mm Flat/Countersunk Head Socket Screws,Pack 50-Piece Stainless Steel,Full Thread,Right Hand,Metric

Pack 50-piece, Thread Dia.2mm, Screw Length 40mm.
Head Diameter: 4mm, Head Height: 1.4mm, Thread Pitch: 0.4mm.
Stainless Steel, Full Thread, Right Hand.
M2 Countersunk Head Socket Machine Screws.

Check Stock

5/16-18 x 1\ Flat Countersunk Head Socket Cap Screws, Full Thread, Machine Thread, Allen Hex Drive, 304 Stainless Steel 18-8 SS, 20 PCS

Package: 20 PCS 5/16-18 x 1" Flat Head Socket Cap Screws (Specification described in the pictures).
Screw Length: 1 inch or 25.4mm (including the height of the flat head).
Please pay attention the thread length is the total screw length minus the head height..
Outside Diameter of the Head: approximately 0.6-0.656 inch.
Ideal for use in confined areas where the head needs to be flush or below the surface..
Made of 304 stainless steel (no coating outside), provides good strength and corrosion resistance in bad environments..

Check Stock

Extremely Strong Neodymium Cup Magnets - 90 lbs Holding Force - 1.26' Industrial Strength Round Base Rare Earth Magnets - Countersunk Hole for #10 Bolt, 3 Mounting Screws Included

GREAT EXTREMELY STRONG NEODYMIUM MAGNETS - For holding or attaching objects to surfaces with magnetic properties. Single round magnet's measures 1.26" (32mm) in DIAMETER and 0.31" (8mm) in HEIGHT. PULL FORCE: 90 LBS (3 Mounting Screws Included).
SUPER EASY MOUNTING: COUNTERSUNK HOLE for easy use with #10 SCREW! This allows the screw head to sit below or flush with the magnets surface. The counter sunk hole on the magnet works with flat head screw to affix onto walls or cabinets.
NI+CU+NI TRIPLE LAYER PLATED, THE BEST COATING AVAILABLE. Tight tolerance +/-0.002". MAX OPERATING TEMPERATURE: 80°C/176°F MAGNETIZED THROUGH THICKNESS so that the N and S poles are on the opposite flat surfaces.
LIMITLESS USES: Base Rare Earth N52 Magnets with Countersunk Hole for #10 Bolt USE FOR A WIDE VARIETY OF PROJECTS. Industrial N52 Strength magnets are great above the workbench to hold tools that you use consistently, so they are within easy reach. Rare earth cup magnets will hold up some of your heavier hand tools quite well and very easily. The applications of this round base magnet include magnetic holding, lifting, antenna Mounting, positioning, meteorite hunting, tool magnetizer, magnetic t.
HIGHEST QUALITY WITH A WARRANTY: X-bet MAGNET makes top neodymium magnets....

Check Stock

100PCS M7x50mm Hex Socket Countersunk Head Self Tapping Connecting Screws Allen Flat Head Furniture Confirmat Screws Carbon Steel Zinc Plated

COUNTERSUNK HEAD: The design of the head allows an aesthetic and permanent connection and a perfect connection of the screw with the furniture panel..
DESIGN: Have a large shoulder under the head that locks the screw into the wood and prevents pulling through into softer materials. It have a blunt point, need to make a 7mm hole and then screw in..
DURABLE SCREWS: Connecting screws can be removed and reinstalled several times without loss of holding power..
WIDE APPLICATIONS: Mainly used in the furniture industry, such as cabinets, chairs, or other types of the box construction, etc.
PACKAGE & MATERIAL: 100pcs M7x50mm flat head hex socket confirmat style self tapping connecting screws. Made of carbon steel material, zinc plated surface, sturdy and durable..

Check Stock

ORGRIMMAR Wood Screw Phillips Flat Head Yellow Zinc Plated Chipboard Screw Wood Interior Construction Metal Screw Assortment Kit,230Pcs

Chipboard screws which have deep and sharp thread for cutting through wood easily and cleanly. The exceptional reliability and strength of the T.K. Excellent enables the user to rely on one product for a variety of applications..
Ｍade of carbon steel, countersunk flat head, yellow zinc passivated for corrosion resistance..
Designed for composite timbers such as hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. Full thread be used when fixing metal to wood..
As the name suggests, these screws can be used when doing general DIY work with chipboard and other softer types of woods.Require pilot holes in hard wood, drilled 2mm smaller than the size of screw used..
The set comes in storage case for easy portability so you'll always have the right screw for the job.Assorted 230 Piece Yellow Zinc Pozi Countersunk Wood Screws.

Check Stock

YIWMHE 100PCS 4.5X60MM Galvanized Woodworking Screw T25 Torx Self-Tapping Screw Deck Screw/Wood Screw/Binding Screw

}1. Material: C1022A, high hardness, sturdy and durable, not easy to dae.
2. Surface treatment: galvanized, anti-aging, anti-rust, anti-corrosion..
3. The countersunk head quincunx design, it is not easy to dae the screw head when the screw is tightened, and the screw pit can be leveled when the screw is driven in to make the surface smooth and beautiful. Has high practicability..
4. The neck thread design can increase the attack speed, increase the wood joining speed by 20%, and the operation is labor-saving and more efficient..
5. Specializing in hardwood, suitable for splicing large wood-plastic craft products such as outdoor gardens, woodworking fences, docks, balconies, and courtyards..

Check Stock