ReviewsSlotting Knife

Yonico Router Bits Set 15 Bit 1/2-Inch Shank 17150 Professional Carbide Tipped Roundover, Cove, Chamfer, Bevel, Dovetail, Straight, Flush Trim, Slotting, Roman Ogee fresas de Router para Madera

  • A perfect 1/2" shank starter set with a great selection of Router bits to accomplish a variety of basic routing jobs such as edging, joining, trimming and slotting..
  • Includes: 4 Dado/Straight Bits - 1/4", 3/8", 1/2" and 3/4" 1 Flush Trim Bit - 1" x 1/2" 1 Dovetail Bit - 1/2" x 10° 1 V-groove bit - 90° 1 Core Box Bit - 1/4" Radius.
  • 1 Chamfer Bit - 45° 2 Cove Bits - 1/4" Radius & 1/2" Radius 1 Roman Ogee Bit - 5/16" 2 Round-Over Bit - 1/4" Radius & 1/2" Radius 1 Rabbet/Slotting Bit - 1/2" H x 3/8".
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge. The bits are also coated with teflon which helps to reduce friction and heat build-up..
  • Silver induction brazing for maximum strength and durability. The set is presented in a durable storage case for easy organization and transportation..
Check Stock

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check Stock

GBJ Face Mill Milling Holder End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 with BT40 FMB22-45L Shank Face Mill Arbor BAP400R 50-22-4T 50mm/1.96\ (Milling Cutter+10 Inserts+Arbor)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting，HRC15°-55°.
  • ☞ Advantage：High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ，90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BT40-FMB22-45L +1× BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

ECCPP Brake Rotor 4pcs Slotted Drilled discs and 8pcs Ceramic Pads fit for Chevy Silverado Avalanche Suburban 1500 Tahoe for GMC Sierra 1500 GMC Yukon for Cadillac Escalade

  • FITMENT - Brake rotors and ceramic disc brake pads set for 2002 2003 2004 2005 2006 for Cadillac Escalade, 2002-2006 for Chevy Avalanche 1500, 2003-2005 for Chevy Silverado 1500, 2000-2006 for Chevy Suburban 1500, 2000-2006 for Chevy Tahoe, 2002-2005 for GMC Sierra 1500, 2001-2006 for GMC Yukon compatible with 120.6604,55054 ATD785C,D785-7653 25757802,55067.
  • SLOTTING DUST REMOVE DESIGN - Slotted brake pads allow dust generated by friction to be dispersed into the air through scribe grooves to increase friction and ensure no abnormal noise on the brakes, making it the perfect solution to brake vibration problems.
  • DRILLED HOLE COOLING DESIGN - Drilled disc brake rotor hole can improve the surface of the brake disc air flow rate and cooling efficiency, effectively shorten the braking distance and improve the braking effect.
  • NON NOISY PADS - The pads with slotting design increases friction, heated evenly, heat faster,better ventilation, improves drainage.Ensure exceptional stopping power and quiet operation.
  • BUYER NOTICE - Please check the description and compatibility chart before your purchasing. Please contact us if you have any question.
Check Stock

Nightcore Table Saw, 10-Inch 15-Amp Portable Multifunctional Saw w/36T Blade, 5000RPM & 45º Double-Bevel Cut Aluminum Table Saw, Bench Saw with Metal Stand & Sliding Miter Gauge for Woodworking

  • ...o protect you from accidental injuries and flying debris..
  • Height Adjustment & Double Bevel Cut: Featuring a double bevel cut from 0-45°, this portable table saw offers a 90° -3 "and 45° -2-1/2" bevel cut. Moreover, this portable table saw is equipped with large hand wheel to control blade lifting, convenient for slotting, wire drawing or cut.
  • Miter Gauge and Rip Fence:The flexible sliding miter gauge can be easily adjusted from -45° to 45° cross cutting. In addition, self aligned tear fence, parallel guide on both sides, cutting more accurate, more stable, without any shaking..
Check Stock

Goplus Table Saw 10-Inch 15-Amp Portable Table Saw 36T Blade Cutting Speed Up to 5000RPM 45º Double-Bevel Cut Aluminum Table Benchtop Table Saw with Metal Stand Sliding Miter Gauge

  • 【Double Bevel Cutting & Adjustable Height】Featuring the double bevel cutting from 0-45°, this table saw provides cross cut at 90°--3" and bevel cut at 45°--2-1/2". And portable table saw has a large hand wheel to control the blade lifting, convenient for different needs, such as slotting, ripping or cutting..
  • 【Miter Gauge & Rip Fence】Sliding miter gauge can be adjusted from -45° to 45° for cross cutting. And self-aligning rip fence with parallel guide on both sides assists the more precise and stable cutting without any wobbling..
  • 【Ergonomic Benchtop Table Saw】On-board storage system is convenient for your wrench and push stick when not in use. The on/off safety switch is available to control table saw stand and provide overload protection. And the 10 inch table saw can be used without the stand which is convenient for outdoor wood cutting..
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

Rierdge 2Pcs Square Slot Cutter, Stainless Steel Precise Square Slot Cutter, Carving One Step for Oscillating Multi-Tool Saw Cutting Drywall Wood Plastic Electrical Boxes - Square + Rectangle (Black)

  • ... 【Easy to Use】Four sharp blades cutting at the same time, not only the cutting surface is very smooth and clean, but also saves time and effort. It makes the grooving work extremely easy..
  • 【WIDE COMPATIBILITY】The square drywall slotting tool is compatible with most 18v, 20v vibration multi-function tools on the market. Can be used to install antenna, automation, alarm, security, home-theater including CEDIA members, CCTV IP camera, drywall contractor, etc. These 2 common sizes can do most of the slotting work..
  • 【Rierdge Promise】 Any more questions about the item or you are not satisfied with your purchase at any point and for any reason, please don't hesitate to contact us. We will respond quickly within 24 hours!.
Check Stock

Norton Abrasives - St. Gobain

  • For deburring, cleaning, slotting and cutting of all types of masonry..
Check Stock