ReviewsSmall Diameter Stainless Tubing

Raindrip 016005VP 1/4 in. Supply Tubing, Black Polyethylene, 50 ft.

  • Branch off the main supply line to create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system.
  • Works in a variety of areas, from small to large, flat or sloped.
  • transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in..
  • connect to main supply line with ¼ in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant.
  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation.
  • water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
  • As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
  • Tubing coil comes shrinkwrapped for convenience.
  • Vinyl tubing is constructed with 100% virgin content for durability.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

Raindrip 314050B 1/4 in. Barbed Connector, 50-Pack, Black

  • Adds a 90-degree turn in your ¼ in. supply tubing or dripline, or use to branch ¼ in. tubing as a feeder line from a ½ in., 5/8 in., or 0.710 in. supply line.
  • Works in a variety of areas, from small to large, flat or sloped.
  • transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Fits ¼ in. tubing or dripline with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in..
  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation.
  • water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
  • As part of a complete drip irrigation system, the ¼ in. elbow connects ¼ in. supply tubing or dripline together, or connects ¼ in. tubing to other drip irrigation parts to transport water to the area to be irrigated.
  • Single-barbed fitting inserts into drip tubing and anchors into place.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

Vance & Hines Quiet Baffle for Shortshots Staggered and Sideshots Exhaust Systems 21301

  • Ideal for replacing rusted-out exhaust baffles.
  • Work great for custom fabrication as well.
  • Tubing is 22-gauge 409 stainless steel with 1/8 diameter holes, 3/16 staggered centers, 33 holes per square inch and 40% open area.
Check Stock

RIDGID 10973 122XL Copper Cutting and Prep Machine, 1/2-inch to 4-inch Pipe Cutting Machine

  • Designed to cut, clean and deburr copper tubing and fittings (Types K, L and M).
  • also cuts and deburrs stainless steel tubing with a maximum wall thickness of 0.065 inches (1.65 mm).
  • Rugged cast aluminum housing and powerful 1/3 HP induction motor for long tool life.
  • convenient carry handle for easy transport.
  • Reamer removes burrs from inside of tubing and brush cleans external surface to prepare for joining.
  • machine also includes accessories to clean inside of fittings and clean burrs from outside surface.
  • Copper pipe cutter has an adjustable handle to accommodate different diameter tubes and a handy built-in 1/2-inch (12 mm) incremental scale for quick and easy measuring.
  • Includes outside diameter cleaning brush, cone reamer, outside diameter deburring disk, fitting brush kit and operator's manual pack.
Check Stock

Beduan Pneumatic Tubing Pipe 5/16 OD Clear Air Compressor PU Line Hose Tube for Water Fluid Transfer 12Meter 39.4ft

  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16" (Outer diameter) , 3/16" (Inner diameter). Package Total Length:39.4 Feet (12meters).
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Wide range for working temperature and pressure.
Check Stock

YaeMarine 4 Steps Stainless Boat Ladder Folding Docking Ladder Dock Swim Step Ladder Swim Deck Ladder Rear Entry with Pool Swim Upper Platform & Extra Wide Step

  • Stainless Steel 304 tubing * Telescopes and flips up *Rear Entry Ladder * Quick release mounting brackets * 400 lb. capacity..
  • Ladder is constructed of 1.5″ diameter .304 stainless steel tubing..
  • Extra wide telescoping steps for more comfort when boarding. Extra tall, comfortable handrails for easy boarding..
  • Comfortable 2″ Wide steps. Hole Diameter: 1/4″ (** mounting hardware is not included) ..
  • Heavy duty all welded 316 stainless steel pontoon ladder. Unique universal self supporting design requires no support..
Check Stock

Raindrip 100050211 Black 016010T 1/4-Inch by 100-Feet Tubing, 1

  • Create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system.
  • for trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in..
  • connect to main supply line with ¼ in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant.
  • As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
  • Tubing coil comes shrink wrapped for convenience.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled content.
  • Comes with one 100 ft. coil of ¼ in. poly supply tubing.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

Capri Tools 3/16 in. Double Flaring Tool (CP21110-316) & Capri Tools Tube Bender, 1/8, 3/16 and 1/4 in. (CP21105)

  • Product 1: Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake lines.
  • Product 1: Works flawlessly with 3/16 in. steel, nickel, and copper tubing.
  • Product 1: Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots.
  • Product 1: Detachable die lets you also use with a bench vise.
  • Product 2: Easily make tight bends on round small-diameter copper, brass, and aluminum tubing.
  • Product 2: Use with tubing with 1/8, 3/16, and 1/4 in. outer diameter.
  • Product 2: Bend tubing from 0-120 degrees. Reference marks at 45 and 90 degrees for accurate bends.
  • Product 2: Compact design lets you work easily in tight spots.
Check Stock

THINBIT 3 Pack LGPT062D2L 'L' Series, Uncoated Carbide, Parting Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M04 or sub-spindle side using M03..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use LH straight or RH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT045D2R 'L' Series, Uncoated Carbide, Parting Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

Raindrip R560DP Automatic Watering Kit for Container and Hanging Baskets Water up to 20 Plants with This kit Тhrее Pаck

  • 1/4 INCH IRRIGATION TUBING: Create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip....
  • CONNECT TO DRIP IRRIGATION PARTS: Connect to main supply line with 1/4 in. micro fitting. connect other end directly to emitter to deliver water to....
  • EASY TO USE: As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
  • FOR DURABILITY: Poly tubing constructed with a layering method: The outer layer, which is exposed to the sun, and the inner layer, which is exposed to....
  • SPECIFICATIONS: Comes with one 100 ft. coil of ¼ inch poly supply tubing.
  • Tubing outside diameter (OD) is 0.250 inch, internal diameter (ID) is 0.170....
Check Stock