ReviewsSmall Plastic Injection Part

Wind Generator, Windmill Generator, Small 5 Blade 400W Lightweight Office for Home(24V)

  • The motor adopts unique magnetic circuit design, and its starting torsion is very small, which can effectively guarantee the starting ability of breeze..
  • Wind has light weight, small size, and shape is better than similar products..
  • The blades are synthetic injection molded with high strength plastic, 30% carbon fiber components , and anti‑ultraviolet and anti‑corrosion materials..
  • The wind wheel runs smoothly, reliably and quietly..
  • The design of wind blade accords with the aerodynamic principle..
Check Stock

Wind Turbine Generator, Lightweight Small 400W Windmill Generator, for Home Office(24V)

  • Wind Turbines has light weight, small size, and shape is better than similar products..
  • The design of wind Turbines blade accords with the aerodynamic principle..
  • The motor adopts unique magnetic circuit design, and its starting torques is very small, which can effectively guarantee the starting ability of breeze..
  • The blades are synthetic injection molded with high strength plastic, 30% carbon fiber components , and anti-ultraviolet and anti-corrosion materials..
  • The wind wheel runs smoothly, reliably and quietly..
Check Stock

uxcell 12x60mm Plastic Expansion Tube for Drywall with Hex Screws Gray 4pcs

  • Carbon Steel Screw Size: 8 x 64mm / 0.31" x 2.52"(Thread Dia*Total Length).
  • Package Content: 4pcs(+/-2%) x Plastic Expansion Tubes.
  • Material - Made of plastic, injection , flexible, good toughness, impact resistance, not easy to break, high expansion coefficient..
  • Design - Good elasticity and high tension. The protruding edge can prevent the expansion screw from entering the deep part of the hole due to over-deep making..
  • Advantage - Good anchoring force, large anchorage range, can be used to fix brackets, handrails, shelves, frames, cabinets, mirror frames, coat and hat frames, skirting boards, curtain guide rail, and home decoration etc..
  • Application - Can be commonly applied to solid brick, concrete, aerated concrete, high-hole brick, gypsum board, sand brick and other wall materials..
Check Stock

VITCIK (Fairing Kits Fit for Kawasaki EX300R Ninja 300 ZX300R 2013 2014 EX300R ZX300R 13 14 Plastic ABS Injection Mold Complete Motorcycle Body Aftermarket Bodywork Frame (Black & Yellow) A041

  • Injection Mold Fairing Kits Set Fit For: Kawasaki EX300R Ninja 300 ZX300R 2013 2014 EX300R ZX300R 13 14..
  • What You Get: [1]Fairing Kits(17 Pieces)+[2]Windscreen+[3]Heat Shields+[4]LIFETIME friendly customer service..
  • Custom-made: We can produce the fairings according to any pictures or sell individual part(tire fender, tank cover, rear seat cover) of the set. Please contact us if you need the bolt kits..
  • Shipping: Handing time is about 1-10 working days (Except holidays), We send out by China EMS, Normally it will take 3-10 working days for delivery (usually 5 working days according to the shipping record, not including handling time)..
  • High Quality: 100% Brand New aftermarket fairings, ABS Plastic Injection Molded, Hole-in-one molding, Perfect Fitment (ONLY compatible with original motorcycle without modification)..
Check Stock

HGV Tools / Compatible with John Deere Timing PIN alt JDG1559

  • Before installing injection pump on engine, install JDG1559 injection Pump Timing Pin into pump , timing pin bore..
  • nstall a small punch or screwdriver into hole in pump drive shaft and turn shaft until timing pin drops into recess in injection pump drive shaft.
  • Use for static lock pin timing during installation of the injection pump..
Check Stock

ZXMOTO Unpainted Motorcycle Front Upper nose fairing for Kawasaki NINJA 650 650R ER6F 2012 2013 2014 2015 2016

  • Fairing fits for Kawasaki NINJA 650 650R ER6F 2012 2013 2014 2015 2016.
  • Position: Front Upper Nose. Color:Unpainted.
  • ABS Injection molded Material: High quality ABS plastic, good elasticity and heat tolerance, not easy to be cracked..
  • Aftermarket Fairing Part.Use same grade OEM bodywork fairing kit ABS raw material.Heat-shield technology adopted..
  • Best Fitment in the Industry – Guaranteed.Pre-Drilled Holes for Easy Installation.Parts Replacement Warranty..
Check Stock

BECEMURU Silicone Small Ice Cube Trays with Lid, Cylinder Ice Cubes Mold for 60 Ice Cubes Make, Food Grade Squeeze Easy-Release Mini Ice Maker Cup - 2 Packs

  • ...ase Ice Cude in Seconds Time - This small ice cube trays which makes the ice easier to release than plastic ice cube trays, release the ice cup lightly, the ice cubes fall off in the cup in seconds.In just a short time, you can have a cup full of ice cubes..
  • Simplely Water Injection - Pour half of the water directly into the cup, and the water injection is completed in 3 seconds, saving time. This would be a great gift idea for friends or family who love to make small ice cube..
  • Samll & Space Saving - Small and round shape, easy to place.Best small ice cube trays for mini fridge. No need for additional storage, after pressing the ice cubes, you can pour it directly into the water glass and enjoy it easily. Ice cubes can stored directly in the silicone cup, which is very convenient..
  • Safe and Durable - The Ice Maker Cup is made of food grade silicone and ABS material, no odor. Can withstand long term low temperature storage without breaking, safe and durable. Good flexibility, not easily deformed by pulling..
  • Most Reasonable Size of ice cubes - Can make 60 0.5"size ice cube....
Check Stock

Moto Onfire ABS Fairing Kit For Kawasaki Ninja 250R EX250 2008 2009 2010 2011 2012 Red White Body Kits

  • ABS Plastic Injection Fairing Kits Fit for Kawasaki EX250R Ninja 250 EX-250R ZX250 (Year 2008-2012 model).
  • You Will Receive: ★[13 pieces Body Work].
  • Separate Sale: If you want the individual part, please feel free to contact us to buy..
  • Custom Scheme: Accept simple custom paint scheme, do please send us pictures..
  • Customer Service Support: ✉ Email us if there are any problems after receiving the package..
Check Stock

ohderii Complete Penny 22

  • FULLY ASSEMBLED COMPLETE BOARD: Our fully assembled cruiser is designed for your convenience, it is ready to ride right out of the box, which is great for children, youth, and adults.
  • NON-SLIP & STURDY DECK: The 22" x 5.5" deck on our complete plastic skate boards are made of a strong, high impact injection molded plastic,it features a compact body to withstand up to 220 lbs. Adding stability and comfort to your riding experience..
  • QUALITY PARTS: Every part on our 22" Skateboard is made quality materials to give you the best ride possible. The aluminum trucks and medium bushings will allow to smoothly turn and cruise.
  • the ABEC 7 precision bearings are made to give you a speedy and effortless ride.
  • and the soft 85A PU Wheels bring it all together for the ride you are looking for..
  • EASY FOR TRAVEL AND COMMUTING: Our PU skateboard is the perfect size to travel with or for a short commute to school or work. Easily store in a backpack when not in use..
  • FOR SKATERS AT ALL LEVELS: with CE certification, this well-built skateboard is safe to ride and suitable for any level of riders, no matter whether youre a beginner or experienced rider.
Check Stock

Redneck Convent Small Caliber 50 Round Universal Reloading Ammo Tray Loading Blocks 10-Pack

  • RELOAD SMALL CALIBERS: The Redneck Convent | Reloading Equipment 50-Round Small Caliber Ammo Case 10-Pack is designed for use with 9mm, 357, .38 special, 380 auto along with many other smaller calibers.
  • Use as a 9mm ammo case or 308 ammo case reloading tray, 9mm ammo storage ammo crate, or similar applications.
  • EASY STORAGE: Easily stackable reloading supplies shell holder ammo cases ensure a stable base and a smaller storage footprint.
  • BUILT TO LAST: Constructed via injection molding from recycled plastic to ensure strength and lifelong durability.
  • NO SLIPS: Ribbed walls of each bullet holder offer a more secure grip and impact resistance.
  • PACKAGE CONTENTS: Package includes (10) small bullet storage ammunition cases for 50 rounds each (500 rounds total).
Check Stock

4c3z9f838a 1845428C92 2004-2006 f250 f350Fuel injection pressure sensor Replacement for ford 6.0 powerstroke icp sensor

  • Manufacturer Part Number:1845428C92£¬4C3Z-9F838-A.
  • OEM Number Part: 4C3Z9F838A£¬5C3Z-9C968-CA£¬5C3Z9C968CA.
  • Replaces #:1845428C92, 4C3Z9F838AB, 3PP6-12,Easy to install, no installation instruction included.
  • Fuel Injector Injection Pressure Sensor Compaitble With 2004-2010 International Trucks With 6.0L Diesel Engine Replaces Ford 4C3Z9F838A, 1845428C92, AP63460, ICP101.
  • Package Content: 1 PCS 1845428C92 Fuel Injection Pressure Sensor.
Check Stock