HiLetgo HD44780 2004 LCD 20x4 2004A Character LCD Screen Display Module Blue Backlight with IIC/I2C Serial InterfaceAdapter
- HD44780 2004 LCD 20x4 2004A Character LCD Display Module.
- Fully assembled and tested Serial LCD 20x4 Module.
ReviewsSmall Size Lcd Module
Aoicrie 16x2 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter, IIC I2C TWI 1602 Serial LCD Module Display, for Mega 2560
- IIC I2C TWI 1602 Serial LCD Module Display for R3 Mega 2560 16x2..
- Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line)..
- Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly..
- With a potentiometer used to adjust backlight and contrast.Power supply: +5V, Address of the module: ox27..
- Widely Applications: LCD display module based on the popular HD44780 controller, works great with for Mega2560 board and other micro-controllers..
DC DC Buck Boost Converter Variable Voltage Regulator CC CV 0.5-30V 4A 5V 6V 12V 24V Power Module Adjustable Voltage Regulated Laboratory Power Supply
- output voltage range is DC 0.5-30V, can be arbitrary adjustable.
- output current can be 3A for long term use, if enhance heat dissipation, it can reach 4A.
- max output power is 35W, if enhance dissipation, it can reach 50W.
- LCD displays input/output voltage, output current/output power/output capacity/output time.The module can be set to ON/OFF by default.
- Safe Protection: the module is with Anti-reverse connection protection of input end, so that it will not burn out when there is reverse connection.Anti-backflow protection at the output end. No need to add anti-backflow diode when charging. Multiple software protection mechanisms are available, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off.
- Application: the volt conversion board can be used as an ordinary buck/Boost module with over-current protection.
- used as a high-power LED constant current driver module.
- DIY a solar power controller, Battery Charging.
- Output ripple is small and πfilter is available.Thick heat sink .Buck-boost Integrated.
Bandolier Hailey Crossbody Phone Case and Wallet - Black Leather with Gold Detail - Compatible with iPhone 13 Pro Max
- The MEGA complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE.
- Free pdf tutorial in the cd (33 lessons).
- Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself).
- Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc..
- We have always cared about the customer experience and improve the product function details.
waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard
- Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
- Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
- 1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
- 10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
- Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.
AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Compatible with Arduino Mega Pololu Shield for Reprap 3D Printer Kit Accessory
- Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
- LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel.
- 2004 LCD smart controller for 3D printer，Supports for RAMPS 1.4 control board.
- This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer.
- A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.
ACEIRMC 4pcs HD44780 IIC I2C 1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino R3 Mega 2560
- HD44780 1602 LCD Display Module DC 5V 16x2 Character LCM Blue Blacklight.
- HD44780 IIC I2C1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino.
1.8 inch SPI TFT LCD Display Module for ST7735 128x160 51/AVR/STM32/ARM 8/16 bit
- This is a new 1.8 inch serial SPI color display module.
- Support analog SPI and hardware SPI. SPI serial, less I/O port need.
- Designed with one socket for sd card and PCB adapter for LCD.
- The LCD display module can be driven by 8051 / AVR / PIC /ARM/STM32.
- The 4D systems lcd display can be driven with at least four IO.
DGZZI 50pcs Blue 5mm Pitch PCB Mount Screw Terminal Block Connector for Arduino (20pcs 2 Pin + 15pcs 3 Pin + 15pcs 4 Pin)
- Application: crystal oscillator, IC socket, DIY PCB universal board, Dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connector suite, USB TO TLL module, power module, LCD module, RS232 TO TLL module..
- Package includes: 20 x 2 Pin Screw Terminal Block + 15 x 3 Pin Screw Terminal Block + 15 x 4 Pin Screw Terminal Block.
LCD Touch Panels Touchpanel Analog for DOGM128-6 (EA TOUCH128-1)
- ... defining functions by components. It's easy even for beginners..
- Lots of Powerful Upgrades - New Launch Intelligent Series 7.0" TFT LCD monitor can be controlled by any MCU. This offers 1 G Hz Cortex A8 CPU driving device and 256 Flash memory for HMI projects. You also get RS232/TTL UART Interface and USB port. The module is compatible with 7/28V wide operation voltage. (This is an excellent choice for your Arduino and Raspberry Pi projects.).
- Clear, Detailed, Hi Res HD - Our Smart HMI TFT LCD display offers excellent 800x480 high resolution with 4-wire resistance touch screen. Rich 262K (18bit) color for high color restore. Rectangular ratio 16:9 display format conversion. 70°/70°/50°/70° wide viewing angle, adjustable brightness（300 cd/m²) , TTF Font and contrast (500:1) offers you the ultimate project experience to accomplish more with improved results..
- Ultimate TFT LCD Display Module for Industry - SCBRHMI Intelligent TFT-LCD Module Model STWI070WT-01 is a customer favorite for a wide range of industrial and business applications. You get highest quality with the most usable functions. Often purchased for equipment in medical, beauty, engineering, industrial control, electric power, civil electronics, automation, traffic, new energy, a....
2 Pieces Digital FM Transmitter Module Stereo FM Transmitter DSP PLL 76.0 -108.0MHz Stereo Frequency Modulation with LCD Display Line/USB/Mic Input, DC 3.0V - 5.0V
- Good performance: thanks to the DSP and PLL technology, these multi-functional stereo FM transmitter modules can provide you with quality stereo.
- Practical design: the FM transmitter module has a blue backlit LCD display, allowing you to clearly see the value in a dark environment.
- The power consumption is extremely low, and noise interference is small.
- Suitable for: this digital FM transmitter supports line/USB/mic channel input, its transmitting frequency range is 76.0~108.0 MHz, and the frequency response range is from 50 Hz to 18 KHz.
- Frequency adjustment stepping is 0.1 MHz/ times when short press the key and 1.0 MHz/ times for long press.
- Wide uses: the digital FM transmitter module can be applied to FM wireless, USB PC broadcast, maternal and child monitoring, wireless microphone and much more.
- Warm notice: please confirm whether the power polarity and power voltage are correct before turning on the power.
- If the input voltage exceeds 5V or the positive and negative poles of the power supply are connected reversely, it may cause permanent destroy to the module.
- Do not touch the components on the back of the module while working, so as not to affect the normal operation of the module.