ReviewsSmd Components

Hot Air Rework Station 110V SMD Soldering Station with Heat Gun Set Adjustable Hot Air Gun Holder °C/℉ Temperature LED Screen Display Hot Air Station for Electronics Repairing Desoldering Welding

  • Hot Air Rework Station - Soft air design is specific for hot-sensitive SMD work or reflow soldering, the surrounding plastic parts will not be deformed. Inner overheat protector to avoid high temperatures damaging the SMD components and hot air gun. 8 speed of adjustable airflow and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. Durable brushless motor and turbofan combination, working noise are less than 45dB, let you focus on your jobs..
  • Soldering Station Powerful Features - 1. Fast Heating: PID technology maintains a rapid heat rising, quickly heat up to the set temperature within 3-5 seconds (max temp. 500℃). 2. Intelligent temperature memory: Back to work, turn the hot air station on, you can pick up the hot air gun and work directly without the need of choosing the appropriate working temperature again. 3. Automatic Cooling Down: The heat gun can automatically turn on or off when you lift it from or on the cradle..
  • Hot Air Station with ℃/℉ Digital LED Screen - LED digital screen displays show precise temperatures, every work state of the hot air rework station, Current Temperature, Standby and No handle insert (no detected heat core). Adopted PID program to monitor the temperature of the hot....
Check Stock

Goupchn Handheld LC Inductance Capacitance Measuring Instrument High Precision Inductor Capacitor Tester Meter Kit

  • Innovative All-In-One Design: This is a tweezer-style digital tester, saving you time by allowing you to quickly test components before installation..
  • Multi-Functional: Not only is it an LCR meter for SMD components, but it can also be used as an ESR meter..
  • Recessed Control Button: Designed for comfort in mind, simply tap the top of the controller and you can switch between features..
  • 360° Rotatable Separated OLED Controller: No matter how you use the left hand or right hand, it is effortless to operate it with the 360° controller. The OLED display will not let you misread the parameters..
  • 10 Hour Battery: Designed for the working professional, on a full charge the tweezers can be used 10 hours continuously..
Check Stock

Handy Flux, 7 Ounce Jar with Brush

  • Function: Soldering electronic components. Anti-oxidation flux. Better welding fluidity. Easy to tin, easy to solder, strong welding..
  • Feature: Non-toxic, no corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
  • Application: Soldering flux is suitable for welding on instruments, meters, gold, copper, iron, tin and other metals. Widely used in phone PCB, SMD, SMT patch and appliance repair..
Check Stock

Hakko FX-8804CK Hot Tweezer Conversion Kit for the FX-888D Station

  • KIT, FX-8804, HOT TWEEZER + HOLDER, FX-889/888D/888.
  • Can only be used with the Hakko FX-888 soldering station.
  • Direct heating - less influence upon surrounding components on crowded boards.
  • Easily removes SMD chips and flat packages up to 25 mm.
  • The collet allows easy replacement and alignment of the tip.
Check Stock

Hakko FM203-01 Soldering Stations and Irons - Type (Soldering Equipment): Digital, Channels (Soldering Equipment): 2

  • Station, hot air, digital, end, w/vacuum, fr-810b.
  • Easy to read digital display for both temperature and air level.
  • Slender hand piece with integrated start/stop button.
  • Ability to store up to 5 user programmable presets for temperature, airflow and time.
  • New Preset Chain feature that allows the operator to link up to 5 presets to run in sequence, simulating a 5-heating zone reflow profile for SMD components.
Check Stock

Hot Air Rework Station, Heat Gun Soldering Station 100-500 °C 110V SMD Hot Air Gun Temperature & Air Speed Adjustable LED Screen Display with 3 Air Nozzles Desoldering Pump Anti-Static Tweezers Cutter

  • Hot Air Rework Station - Soft air design is specific for hot-sensitive SMD work or reflow soldering, the surrounding plastic parts will not be deformed. Inner overheat protector to avoid high temperatures damaging the SMD components and hot air gun. 8 speed of adjustable airflow and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. Durable brushless motor and turbofan combination, working noise are less than 45dB, let you focus on your jobs..
  • Hot Air Gun Powerful Features - 1. Fast Heating: PID technology maintains a rapid heat rising, quickly heat up to the set temperature within 3-5 seconds(max temp. 500℃). 2. Intelligent temperature memory: Back to work, turn the hot air station on, you can pick up the hot air gun and work directly without the need of choosing the appropriate working temperature again. 3. Automatic Cooling Down: The heat gun can automatically turn on or off when you lift it from or on the cradle..
  • Digital LED Screen of Heat Gun Station - Large LED digital screen displays every work state of the hot air rework station, Current Temperature, Standby and No handle insert(no detected heat core)..
  • Specification of Soldering Station- Operating Voltage: AC110V, Output Power:700W, Noise: Less t....
Check Stock

DSO 138 Oscilloscope 2.4

  • Training for electronic production , complete detailed descriptive information , like schematics , instructions, etc., making a high success rate..
  • Component species diversity for students to identify elements , inline elements welding, soldering SMD components training..
  • Kits using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4 -inch color TFT display can be used as test ARM development board..
  • Available source,the ability of a friend can be secondary development kit based on,for example,it can be changed to Millivoltmeter,data loggers,and so on..
  • Students can get in at the same time making a practical tool for audio, video synchronization , low-frequency switching power supply , infrared receiver transmitter signal waveform and many other occasions, effectively observed and measured , increased interest in learning, improve learning outcomes..
Check Stock

Fully Welded Assembled DSO138 2.4

  • it allowed making a practical tool for audio and video synchronization at same time, low-frequency switching power supply , infrared receiver transmitter signal waveform and many other occasions, effectively observed and measured , increased interest in learning, improve learning outcomes.
  • Component species diversity for students to identify elements , inline elements welding, soldering SMD components training.
  • Training for electronic production , complete detailed descriptive information , like schematics , instructions, etc., making a high success rate.
  • Kits using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4 -inch color TFT display can be used as test ARM development board.
  • Available source , which can be secondary development kit based on , for example, it can be changed to Millivoltmeter , data loggers , and so on.
Check Stock

HoldPeak Digital Smart SMD Tester 6000 Counts HP-990C DMM Handheld Resistance Capacitance Tester,Digital Multimeter Auto Scan with Spare Test Pins (Battery Included)

  • ...tester case has been with thermo plastic elastomer, and Spare Test Pin are included which has been gold-plated, so that can be reduce pin contact resistance and prevent it from rusting..
  • ✅【Wide Range of Application】With the function of the continuity and Diode Test,you can used it for many applications,such as components verification and sorting, production lines, laboratory and service center, in-field repair，battery power test and more..
  • ✅【Auto Power Off】If the tester is idle for more than 15 minutes, the tester will automatically turn off the power.HOLDPEAK 990 SMD tester is a handheld and battery operated small Tool, very convenient to operate and it is easy to measure SMD..
  • ✅【100% Warranty Guarantee】HOLDPEAK come with 2 years warranty and lifetime technical support,if you have any questions about our product,just feel free to contact us, your satisfactory purchase experience is our greatest hope! Looking forward to your consultation..
Check Stock

AUDIOPIPEMAP Audiopipe Amplifier D Class 1200 Watts

  • Mono channel operation, variable low-pass filter, Subsonic filter, Double side FR-4 PCB high quality SMD components, Overload, short circuit, thermal and low voltageSpecifications..
  • Wheeler Delta Series AR 15 Complete Brush Set, every home needs an electronics expert, someone who can decide if it makes sense to the latest equipments..
  • If you are a gadget freak, our Electronics catalog is your dream destination. If you’re still stuck at the basics, our elaborate product specifications shall handhold..
  • Most orders to ship same lightweight items ship and can to a PO BOX, most other ship via UPS FedEx..
  • Audiopipe APHDM1200 Amplifier D Class 1200 Watts offers the majority of the properties, It has countless elements including APHDM1200, APHD-M1200, model and volume..
Check Stock

VEVOR Preheating Oven T8280 1600W Infrared Preheating Station Hot Plate PCB Preheater 280x270MM

  • Preheating Station Work Bench Size :410x316mm.
  • Complete Preheating Oven Machine Power :1600W.
  • PCB Preheater Heating plate temperature can be adjusted: 0-450 degree.
  • Preheating Oven T-8280 Can Achieve To Heat PCB Board And Component Which Contains Lead Or Not，Especially For The BGA And SMD Parts.
  • Preheating Station Use Infrared Heat, Easy To Cut Through, Heat Proportion, Don’T Have Sirocco Flow. Don’T Shift The Small Components On The PCB Board，Ensure The Welding Quality.
Check Stock