ReviewsSmd Connector

ACTOO 4 Pin RGB Splitter Extension 1 to 2 Led Strip Connector Splitter Cable for 5050 3528 2835 RGB LED Strip Light 2 PCS

  • Multi-purpose: This LED connector kit comes with detachable T sheets and straight couplers, perfect for both 3 way connection and extension along a....
  • All 4 pin light strips covered: Work with any 4-pin 10mm (0.39in) wide SMD 3528/5050 multicolor LED flexible strip lights, whether it is a waterproof....
  • Solderless solution: Create a quick shunt, solid connection without the hassles of soldering. Just slide the light strip under the connector's pins....
  • Fireproof material: JACKYLED RGB connectors are made from PBT material, which is heat resistant, fireproof and no Fire Hazard. 72W max wattage, which....
  • You get extra: The LED strip light connector kit comes 10 pcs T boards and 32 pcs connector clips, as well as detailed instructions in both paper and....
Check Stock

Treedix 4pcs USB Type-C Breakout Board Serial Basic Breakout Female Connector Type PCB Converter Board

  • With this USB breakthrough, you will finally be able to integrate the USB-C connector into your project without soldering every tiny SMD pad.
  • This upgraded USB-C breakthrough board has powerful power, three times the power of the previous USB. The breakthrough board adds resistance to the original foundation.
  • This USB-C breakthrough board is reversible, so it also solves the general frustrating problem of USB cables.
  • This board introduces the VBUS, GND, CC1, CC2, D+ and D- pins of the USB-C connector into a 0.1" pitch connector, while providing up to 1.5A nominal power and up to 3A power, It depends on the upstream equipment.
  • Use it to replace the charging port on the astro a50 headset. It can be said to be perfect. There are positioning holes on the breakout board for easy fixation. The hole on the Type-c USB is large enough and the connector size meets the association standard..
Check Stock

5 Pin RGBW Led Connector Extension Wire with 5 Pin Conenctor, SIM&NAT 15 cm / 5.9 inch RGBW RGBWW Connector Plug Weld Line Male Female Plug Cable for SMD 5050 Led Strip

  • 5 Pin RGBW RGBWW female connector Plug Cord with bare wire terminal, ideal for soldering.
  • Length of RGBW extension Cable: 5.9 inch / 15cm.
  • RGBW / RGBWW Extension Cable for 5050 SMD RGB Warm White led strip light.
  • Can be welded to RGBW / RGBWW led strip light..
  • Package content: 10* 5 pin Female Connector Cord, 10* 5 Pin male Plug Connector.
Check Stock

XUNATA 16.4FT LED Strip Lights, 12V 600 Units SMD 5630 Super Bright LED Rope Tape Ribbon Light Strips, Non-Waterproof for Ceiling Home Kitchen Bedroom Decoraion(Warm White)

  • SUPER BRIGHT: High Quality 5630 SMD Top LED, high density 600 LEDs (120 LED/M), daylight warm white 3000-3500K, 23-25LM/LED, 2 times brightness than SMD5050 LEDs. This super bright tape strip light can be dimmable, but do not included dimmer, please search ASIN: B07JVHSTYZ if you need.
  • NON-WATERPROOF AND EASY INSTALLATION: This LED strip is waterproof IP21, so it can not used in raining. Self-adhesive back with adhesive tape for safe and easy application.
  • WIDELY USED: This LED Strip Light can be used for daily lighting, also ideal for decorating and bright home,office, indoor. LED flexible rope lights can be used for cove lighting.
  • accenting decks, front porches, staircases, etc..
  • CUTTABLE AND LINKABLE, EASY TO USE: Cuttable every 3 LEDs along the cutting marks, reconnect with connector. A power adapter and connector are required but NOT INCLUDED, please search "B07XFZMPWT" on Amazon if you need one.
  • BUY WITH CONFIDENCE: Long life span more than 50,000 hours. 100% MONEY BACK GUARANTEED - If you are not satisfied with our products for any reason, send it back for a 100% no questions asked refund.
Check Stock

5050 4 Pin RGB LED Strip Connector Kit Includes RGB Extension Cable, LED Strip Jumper, 2 Way RGB Splitter Cable, L Connectors, T Connector, Gapless Connectors, 4 Pin Male Connector, LED Strip Clips

  • LED strip connector kit: the package includes 5 pieces female connector wire cables, 5 pieces LED connector cables, 10 piece fixing clips, 10 pieces screws, 10 pieces black male to male connectors, 10 pieces white male to male connectors, extension cable in 3.3 feet and 6.6 feet, 1 piece of 2 way splitter, 20 pieces solderless gapless connectors, 4 pieces L-shaped connectors and 4 pieces T-shaped connectors, which can meet your DIY need.
  • Compatible with: the LED connector kit fits the 0.39 inches/ 10 mm SMD 5050 RGB LED strips, compatible with waterproof and non-waterproof strips.
  • For waterproof LED strips, please strip off the silicon on the surface around the welding area.
  • Enjoy the fun of light strip: with these various LED connector adapters, you can easily set up your LED light bar and customize it.
  • Use a solderless 4-pin connector to connect a separate light strip, or use a corner connector to connect the corner of the house and table, the wall or the ceiling, etc..
  • Easy to install: 5050 4 pin RGB LED light bar connector kit can be plugged and played, easy to install, no tools and soldering are required.
  • Widely applied: light strip connector can be applied for the connection between 2 light strips, the connection between the light strip and the con....
Check Stock

RGBZONE 20Pairs JST SM 4PIN Plug Male to Female EL Wire Cable Connector Adapter for 5050 3528 RGB LED Strip Light

  • 20 pcs Male 4 Pin JST SM Connector Wire + 20 pcs Female 4 Pin JST SM Connector Wire.
  • Compatible with SMD 3528/5050 RGB LED Strip.
  • Application: Used widely in LED strips,mini remote control helicopter,indoor 3D plane,etc..
Check Stock

72 Pin Connector and 3.8mm Screwdriver Bit Open Tool for NES 8 BIT Nintendo System Parts

  • Multi-purpose: This LED connector kit comes with detachable T sheets and straight couplers, perfect for both 3 way connection and extension along a straight line. The T sheets can be cut into L sheets which suitable for 90 degree corners connection..
  • All 4 pin light strips covered: Work with any 4-pin 10mm (0.39in) wide SMD 3528/5050 multicolor LED flexible strip lights, whether it is a waterproof one or non-waterproof lights for indoor use..
  • Solderless solution: Create a quick shunt, solid connection without the hassles of soldering. Just slide the light strip under the connector's pins and snap down the clip..
  • Fireproof material: JACKYLED RGB connectors are made from PBT material, which is heat resistant, fireproof and no Fire Hazard. 72W max wattage, which can be used for low wattage and high wattage light strips..
  • You get extra: The LED strip light connector kit comes 10 pcs T boards and 32 pcs connector clips, as well as detailed instructions in both paper and online. If you need any help when using the connectors, please feel free to contact our online customer team..
Check Stock

USB Type-C Breakout Board Serial Basic Breakout Female Connector Type PCB Converter Board (5 PCS)

  • Easy to solder:The upgraded USB-C breakthrough board has powerful power,three times the power as much as previous USB. Easy to integrate the USB-C connector into your project without soldering every tiny SMD pad,Easy to solder to the through-board terminals.
  • Simple and sturdy construction:The USB-C breakthrough board can be reversible.That can easily solve the general frustrating problem of USB cables.The USB breakthrough board can adds resistance to the original foundation.
  • Convert efficiently:The USB Type-C Breakout Board contain VBUS, GND, CC1, CC2, D+ and D- pins,In total of 6 USB-C connector that can be connect 0.1" pitch connector.Worked perfectly, The board can provide up to 1.5A nominal power and up to 3A power.Depending on the upstream equipment.Can definitely be used to convert keyboards to USB-C Detachable.
  • Apply for:The USB Type-C board can be used to replace the charging port on the astro a50 headset.PCBs quality and the contacts soldered with ease.Used these to convert an old hardwired keyboard to removable usb-c. Worked perfectly.
  • Package content:5pcs High quality USB Type-C Breakout Boards+5pcs pin connector.
Check Stock

LightingWill 10pcs/Pack Strip Wire Solderless Snap Down 2Conductor LED Strip Connector for 10mm Wide 5050 5630 Single Color Flex LED Strips

  • 2 pin connector for 10mm wide SMD5050 5630 single color LED strip.
  • Working Condition: Can be able to stand up to 4A current and 0-24V voltage.
  • Heat resistance level from -20 ~ 100 degree C..
  • One end with clip to strip, the other with wires as lead.
  • Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
  • Package includes: 10x 2 pin connectors for 10mm SMD5050 5630 single color LED strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors.
  • Search B01DM7F052 for 8mm 3528 2835 LED strips..
Check Stock

6SE6440-2UD25-5CA1

  • (100 Pcs) 1x2P2mm Wire-to-Board Connector SMD,P=2mm KH-PH-2P-W.
Check Stock

RuiLing 1-Pack 7 Section SMA Male Connector Aerial Telescopic Antenna Radio TV DIY Antennas DVB-T Radio Scanner VHF UHF

  • [Version] The 3.2 version of the latest program has been burned. If the version is updated, you can contact us for the latest program..
  • [Product Features] The antenna tuner is automatically tuned,KIT of ATU (Automatic Antenna Tuner) developed by N7DDC, equipped with a 0.96 inch OLED screen, the data is clearly visible..
  • [High-quality accessories] Use high-quality brand SMD capacitors, C-channel capacitors, use high-quality 1000V high-voltage SMD capacitors, and the PIC chip imported..
  • [Interesting assembly] The kit has already soldered components and chips, and will be equipped with installation instructions, which is easy to install and enjoy the fun of assembly..
  • [UHF connector] This is specially prepared for you, which provides an extra layer of guarantee and possibility for you to connect products and equipment..
Check Stock