ReviewsSmd Electrolytic Capacitors

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

High-frequency transducer: XStat CLS electrostaic transducer.
Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
Recommended amplifier power: 20-400 watts per channel.
Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.

Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.
Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".

Check Stock

Basic Electronic Components Kit Resistor 600pcs Diode 100pcs LED 6 Colors 120pcs Electrolytic Capacitor 12 Values 120pcs Transistor 18 Types 180pcs Ceramic Capacitor 30 Types 300pcs Total 1420PCS

All products are tested for stability, consistency and reliability,Ensure product excellence..
This is a great assortment of components for electronic professionals or enthusiasts..
The kit includes diodes, resistors, transistors, LED diodes, electrolytic capacitors, ceramic capacitors..
If any problem, please contact us. We will give you a satisfactory solution as promised..

Check Stock

Fielect 80Pcs Aluminum Radial Electrolytic Capacitor 10uF 63V Low ESR Green 5x11mm High Ripple Current,Low Impedance for TV, LCD Monitor, Radio, Stereo, Game

【Dimension】 -Capacitor capacity:10uF.
【Material】 -Electrolytic capacitors are made of high-quality standard materials, with high insulation strength, fast switching speed, high power consumption and good current performance.
【Features】- The capacitor has excellent moisture resistance, small size, wide capacitance and reliable performance.
【Advantage】-Each electrolytic capacitor has an identification code and a marked capacitance value, which is easy to distinguish and use.
【Application】 -This series is suitable for power supply, communication equipment, switching power supply, audio amplifier interconnection level, industrial measurement.

Check Stock

OCR 24Value 500pcs Electrolytic Capacitor Assortment Box Kit Range 0.1uF－1000uF

The nice sturdy box helps you keep all caps in order..
All of the capacitor is marked the value,easy to find what you need..

Check Stock

Molence SMD 0603 0805 1206 DIY Electronics Components Kit Assortment, 3638PCS Resistor, Capacitor, LED, PCB, Diode, Transistor, Potentiometer for Arduino UNO MEGA2560 Raspberry Pi MCU

All products are tested for stability, consistency and reliability,Ensure product excellence..
【100% brand new and high quality】Save time with this handy box full of the most practical and common e-components.
【Easy to store】Each different component is packaged in a plastic bag, Resistors values are stamped with the according value.
【Electronic components set include】diodes, resistors, transistors, LED diodes, electrolytic capacitors, ceramic capacitors..
【Great component kit】This is a great assortment of components for electronic professionals or enthusiasts. 【Value for money】mogaopi Electronic Components Package includes 6 different kinds components, 1390pcs in total..

Check Stock

Dayton Audio 4.5k-HPF-8 High Pass Speaker Crossover 4,500 Hz 12 dB/Octave

... and natural music.Small switch can adjust the treble (normally 3db can be added)..
Super Durability -- Wire wound ceramic resistor and high-quality metal film capacitors, ensure its large load power, long-term durability, never burnout.High-quality capacitors low loss and high quality, no longer have the problem of electrolytic capacitors..
High-quality Materials -- High temperature resistant wire, wire wound ceramic resistor and imported metal film.Over-current protection design, simple and beautiful lines, reasonable component layout.Any questions,Please feel free contact us,we will do our best effort to serve you..

Check Stock

HiBy R5 Saber Portable Music Player MP3 Player Android Lossless Digital Audio Player

4 470µF electrolytic caps complete the output stage to increase the current carrying capacity for transient response..
7 200 µF and 4 47µF capacitors are all high-end POSCAPs with minimal ESR for maximal power supply noise rejection and pure sound..

Check Stock

ASHATA Speaker Frequency Divider Board,Professional 3 Way Speaker Crossover Filter Audio Frequency Divider 300W for DIY KTV Stage Speaker with Over-Current Protection Design

❃【DIY Frequency Divider】- This is a tweeter+mediant+bass three-way KTV, stage professional speaker crossover and DIY upgrade tool which is to improve audio quality..
❃【High Quality Materials】- High temperature resistant wire, wire wound ceramic resistor and imported metal film, Ensuring large load capacity, long-term durability and very good sound quality..
❃【High Quality Capacitors】- Low loss and high quality, no longer have the problem of electrolytic capacitors..
❃【Sound Quality】- Ensuring large load capacity, long-term durability and very good sound quality..
❃【Adjustable】- Small switch can adjust the treble (normally 3db can be added)..

Check Stock

TEMCo 80+7.5 uf/MFD 370-440 VAC Volts Round Dual Run Capacitor 50/60 Hz AC Electric - Lot -2 (Optional uf/MFD, Voltage and Lot Quantities Available)

Save time with this handy box full of the most practical and common e-components.
1000 pcs Resistor, 170 pcs Transistor, 120 pcs Electrolytic Capacitors, 100 pcs Diodes, 200 pcs 3mm 5mm LED, 310 pcs Ceramic Capacitors, 3 pcs DC-022 3 pcs DC-005 DC jacks, 2 pcs LM358, 2 pcs NE555, 2 pcs JRC4558, 1 mini speaker, 2 pcs 1n270 Germananium Diode, 2 pcs Germanium Transistor, 12 pcs Trim Potentiometer, 4 pcs PCB.
The Assortment comes in durable cardboard box, each components type is sorted accordingly.
Each different component is packaged in a plastic bag, Resistors values are stamped with the according value.

Check Stock

Goupchn Multimeter Test Leads Kit 21PCS Digital Electrical Test Probes Set with Alligator Clips Mini Grabber SMD IC Test Hook Clips Test Tweezer Replaceable Precision Sharp Probes

...st hook clip has a retractable clip hook and an extension lead which provides safe and secure connections for clamp and any terminal block. The front end of the hook is retractable with a spring, so objects can be firmly hooked. Perfect for continuity testing of circuit board components, resistors, logical analyzer capacitors or other SMD components..
Test Tweezer: Test leads set also contains a test tweezer. Suitable for resistor, capacitors and other SMD components. Non-slip comfort grip, it is convenient to use with one-handed operation of multi-function testing. Length: 15.3cm/6inch..
Wide Use: 21PCS multimeter test leads kit works perfectly with any multimeter and test instrument. Replaceable needles, banana plug adapters, alligator clips, mini grabber SMD IC test hook clips and test tweezer can help expand testing capability and flexibility..
Package include: 2PCS Multimeter Leads, 8PCS Replaceable Needles, 2PCS 4mm Banana Plug Connectors, 2PCS U-Type Adapters, 2PCS Heavy Duty Alligator Clips, 2PCS Minigrabber SMD IC test hook clips with extension leads, 2PCS Safety Caps, 1PC Test Probe Tweezer..

Check Stock