ReviewsSmd Rgb 5050 Strip

Motorcycle LED Light Kit Strips 18 RGB Colors Motorcycle Lights Atmosphere Lights Bar Multi-Color Ground Effect Light with Dual IR/RF Remote Controller-12Pcs

There are 12pcs motorcycle multi-color RGB remote flexible strip lights kit in the package (including 4 x 3.94" 6 LED strip + 4 x 7.87" 12 LED strip +....
Flexible RGB LED strip light kit, can easily be bent or curved to enable storage convenience, instant to install as desire with pre-installed 3M....
12pcs motorcycle led light kit comes with 2 wireless remote with voice control. Motorcycle light will beats with the rhythm. RGB 5050 SMD LED, It can....
Each strip is backed with super stick tape for easy mounting. Can easily be bent or curved to desired position. Pre-installed Adhesive Tape on Strips....
Different sizes fit for different place on your motorcycle, strips can also be cut to size. With waterproof function, can be used in rainy days. If....

Check Stock

RGBZONE 2 Pack 3M 9.9ft Extension Cable Connect Female Plug to RGB LED Strip Light with Free 4pcs 4pin Connector

Length:3M , 2pcs extension cable with 4pcs 4pin connector free.
Extension Connecting Cable for 5050 3528 SMD RGB LED Strip Lights.
A perfect solution for connecting led strip with controller or strip to strip connection.
4 pin quality cable wire,bended and notated.
No need welding,no need soldering,easy to use.

Check Stock

Fntek 10Packs 4-Pin RGB LED Light Strip Connectors 10mm Unwired Gapless Solderless LED Tape Light Adapter Terminal Extension Connectors for SMD 5050 Multicolor LED Strip (10 Pcs 4PIN RGB Connector)

Application: Suitable for all 10mm wide (0.39 in) 4-pin SMD 5050 RGB flexible LED strips, making solderless and gapless connections for waterproof and non-waterproof LED light strips. Ideal for extending the LED strip and straight connection.
Easy to Use: Quick shunt connection and solderless snap down. Open the wire clamp. With a little effort, it will open quickly. Insert the 10mm LED strip into the clips under the two contact feet, making sure that the”+” and “-” correctly.
Fireproof Material: Fntek LED connectors are made from PBT material, which is heat resistant. 72W max wattage, which can be used for low wattage and high wattage light strips.
Note: Make sure you put the led strip under the pins and not on top. Please peel off silicon on the surface around soldering area when installing waterproof LED strips. Also be sure to cut along the suggested line evenly so there is room for a proper connection on each side.
Package: 10X 4 pin connectors for 10mm SMD5050 LED strip lights. If you have any questions, inquiries or need assistance, please feel free to contact us.

Check Stock

4 Pins Black RGB LED Splitter Cable LED Strip Connector 6 Way Splitter Y Splitter for One to six RGB 5050 3528 LED Light Strips with,1m RGB Wire，10x Male 4 Pin Plugs

APPLICATION:Perfect for extending or connecting your SMD5050 3528 4 Pin RGB LED Strip Lights in your preferred locations..
PACKAGE INCLUDES: 1*5M/16.4ft RGB extension Wire,1*3M/9.8ft RGB extension wire, 2* 1 to 2 LED Strip Splitter 4 Pin, 20*Male Plug 4 Pin Connectors..
4 PIN LED STRIP WIRE GAUGE:22awg ,Carrying voltage: 0-48V, Carrying current: 0-2A, Working temperature: -20 degrees Celsius - +110 degrees Celsius..
QUICK CONNECTION:Comes with 20pcs 4pin male plug. No soldering is needed, just plug to connect, easy to install and storage..

Check Stock

5050 4 Pin RGB LED Strip Connector Kit Includes RGB Extension Cable, LED Strip Jumper, 2 Way RGB Splitter Cable, L Connectors, T Connector, Gapless Connectors, 4 Pin Male Connector, LED Strip Clips

LED strip connector kit: the package includes 5 pieces female connector wire cables, 5 pieces LED connector cables, 10 piece fixing clips, 10 pieces screws, 10 pieces black male to male connectors, 10 pieces white male to male connectors, extension cable in 3.3 feet and 6.6 feet, 1 piece of 2 way splitter, 20 pieces solderless gapless connectors, 4 pieces L-shaped connectors and 4 pieces T-shaped connectors, which can meet your DIY need.
Compatible with: the LED connector kit fits the 0.39 inches/ 10 mm SMD 5050 RGB LED strips, compatible with waterproof and non-waterproof strips.
For waterproof LED strips, please strip off the silicon on the surface around the welding area.
Enjoy the fun of light strip: with these various LED connector adapters, you can easily set up your LED light bar and customize it.
Use a solderless 4-pin connector to connect a separate light strip, or use a corner connector to connect the corner of the house and table, the wall or the ceiling, etc..
Easy to install: 5050 4 pin RGB LED light bar connector kit can be plugged and played, easy to install, no tools and soldering are required.
Widely applied: light strip connector can be applied for the connection between 2 light strips, the connection between the light strip and the con....

Check Stock

TronicsPros 2pcs 4 Pin LED Splitter Cable RGB Splitter LED Strip Connector LED Tape Splitter LED Ribbon Connector 2 Way Y Splitter 1 to 2 Splitter Cable for RGB 5050 3528 2835 LED Band 30cm/12

4 pin LED splitter cable for SMD 5050/3528/2835 RGB LED strip lights (with 4 pin or 4 copper contacts at every cutting line on the LED strip). Not for....
This DC Power Adapter Cable splits 1 power signal into 2, enables you to connect 2 color changing RGB LED strips to a single controller.
Power supply with sufficient amperage for 2 LED strips is required.
High quality cable and connectors with refined materials..
Package Content: 2x RGB LED Strip Splitter Cable.

Check Stock

Rider (Silver Saints MC)

RF Remote: 4 Key RF wireless remote, it can create a nice atmosphere when you have outdoor party. Remote Range: ≦ 10 m/ 32.8 ft..
Multi-color Mode: RGB 5050 SMD with brightness & color adjustable function. It can create 15 static color combinations, and flashing, jumping, fading modes, makes your bike the coolest..
Waterproof and Durable: With the IP68 Waterproof material, completely sealed by transparent shell which won't influence the light transmittance, waterproof and dust-proof..
Easy Installation: Each flexible LED motorcycle lighting strip can be easily mounted using the adhesive tape on the back of each strip. Bend each strip to desired position..
Fitment: This is a universal product, fit all motorcycle, car, ATV, SUV, bike, trucks with DC 12-volt power. It's bright enough to draws everyone's attention at night..

Check Stock

Vetroo ARGB LED Light Strip Lights 15LEDs for Modding PC Case M/B with 3pin 5V RGB Header Compatible with Asus Aura, Asrock RGB Led, Gigabyte RGB Fusion, MSI Mystic Light (Single)

Addressable RGB Lights: Vetroo Addressable RGB LED strips are designed for Motherboard with 5V 3-pin Digital RGB led strip interface, Connected by 5V ADD RGB 3-pin header on Motherboard to sync the led lights..
Wide Compatible: Compatible with Asus Aura, Gigabyte RGB Fusion, MSI Mystic Light, ASROCK RGB LED etc. which prefect for DIY builders to build up any color or animation you desired..
Easy Installation: The light strip comes both with magnets and double sides adhesive on its back, better for you fix it on your build without any screws and clips..
Brighter LED Beads: Light strip features 15pcs premium ultra bright and high-quality SMD 5050 led chip and using double layer copper on PCB board to keep the mixed colors more even..
Customized DIY: Choosing your favorite color via motherboard control, It is more convenient to change the colors and modes..

Check Stock

ACONDE 6.56 feet USB LED Strip Lights, DIY Indoor Decoration, TV Backlight, 24 Keys Remote

USB strip lights decorate your indoor space, such as dining room, kitchen, bedroom, washroom, tent, etc..
With the remote control you can adjust colour, brightness, scene mode, etc..
RGB SMD 5050, Super adhesive backing tape.
Each led strip lights have 60 lamp beads, and each led can be cut..
12 months warranty with timely and intimate services..

Check Stock

DAYBETTER (2rd Gen) SMD 5050 Remote Control Led Strip Lights 50ft Color Changing with 44Keys Remote Controller and 12V Power Supply for Bedroom

This 50feet led light strips has smd5050 leds with dimmer and brightness control,plus rgb and color changing modes, with 44 keys ir remote control.
Featured in rgb,with a remote control in hand, this led lights support change 20 colors and 8 light modes.
With adhesive tape, this led lights fit for any dry, clean and smooth surface.
This led strip lights in short circuit protection, and working voltage of this led light strip is only 12volts.
Cuttable features allow you cut this led strip lights every 3leds along the cutting marks if you don't need such a long lights.

Check Stock

Molded on a Motorcycle: A Rider's Journey

RF Remote: 4 Key RF wireless remote, it can create a nice atmosphere when you have outdoor party. Remote Range: ≦ 10 m/ 32.8 ft..
Multi-color Mode: RGB 5050 SMD with brightness & color adjustable function. It can create 15 static color combinations, and flashing, jumping, fading modes, makes your bike the coolest..
Waterproof and Durable: With the IP68 Waterproof material, completely sealed by transparent shell which won't influence the light transmittance, waterproof and dust-proof..
Easy Installation: Each flexible LED motorcycle lighting strip can be easily mounted using the adhesive tape on the back of each strip. Bend each strip to desired position..
Fitment: This is a universal product, fit all motorcycle, car, ATV, SUV, bike, trucks with DC 12-volt power. It's bright enough to draws everyone's attention at night..

Check Stock