ReviewsSmd Signal Isolators

NATGAI Steel Spring Hanger Vibration Isolator for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • High Quality: By using 3mm thick steel, high quality spring and silicon material, this product provides high efficiency in absorbing vibration, it is fully matched to requirements of interior decoration..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

Torchbeam 1156 LED Bulb Turn Signal Light Bulbs, CANBUS Error Free, Replace for P21W BA15S 1156A 1156NA 7506 1141, 12V-24V Amber Yellow LED Car Bulb, 2pcs

  • Full Brightness & Ultra Bright: The 1156 signal/parking light is equipped with 54 SMD high performance 3014 & 3 SMD 3030 chips per bulb and is adopted with a cellular structure design of 360 degrees, Giving brilliant and 360° fuller amber light in your lens, More noticeable when ready to parking or turning, keep safer.
  • Worry-Free to Install: 1156 turn signal bulbs are equipped with CANBUS driver, non-polarity, and instant-on capability with zero warm-up time. Plug and play, easy to install.
  • Extended Lifespan Over 30,000 hours: 1156 led bulb built-in intelligent IC driver for a longer life span & low power consumption, Full aluminum housing with projection lens for maximum Light output and better heat distribution.No more frequent changes improved the driving experience.
  • Wide Application: The 1141 amber bulb can be used for Turn Signal Lights, Red Brake Lights, Tail Lights, Side Marker Lights, Corner Lights, Blinker Lights, rear fog lights, etc. Compatible with socket BA15S 1156 1003 P21W 1156A 1156NA 1141 7506 R5W, etc. (NOTE: Installation positions will vary on individual vehicles, please duable check your car user manuel and choose the right bulb's model).
  • Note: Extra load resistor is required to avoid the turn signal fast blinking/hyper flash or erro....
Check Stock

Yorkim 3157 LED Bulb Amber 3157 LED turn signal bulb 3157 LED blinker bulb 3157a led bulb 4157 bulb 3056 3156 3057 4057 led 3157 rear turn signal bulb front turn signal bulb 3457 led bulb Pack of 2

  • 【Ultra Bright】Yorkim 3157 Led Bulbs Amber are built in Constant Current IC driver, powered by 54smd 3014 and 4smd high performance 3030 chipsets....
  • 【Fitment】This 3157 led bulb amber is commonly used for 3056 3057 3156 3157 3357 3457 3757 4057 4114 4157 5702 LED turn signal lights bulb, led....
  • 【360 Degree Illuminating】Each 3157 led bulb amber is 360 degree powered by 54smd 3014 and 4smd high performance 3030 chipsets with HD projector to....
  • 【High Quality And Long Lifespan】With built in Constant Current IC driver, Yorkim 3157 Led bulb circuit is protected by stable input current. The....
  • 【Easy to Install】This 3157 led bulb amber is plug and play. Non-Polarity design. Simply plug the bulb in and you are all set! **ATTENTION**: The....
Check Stock

iBrightstar Newest 9-30V Super Bright Low Power 7443 7440 T20 LED Bulbs with Projector Replacement for Front Rear Turn Signal Lights, Amber Yellow

  • (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage: 9v-30v.
  • Fits: 7440A 7440NA 7440 7440SV 7443NA 7441 7443 7443R 7444 7444NA 992 WY21W W21/5W W21W etc. Easy installation, plug and play..
  • Application: Turn Signal Lights, Brake Lights, Tail Lights, Side Marker Lights, Corner Lights, Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights..
  • Advantage: Non-polarity design, more than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption..
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you..
Check Stock

iBrightstar Newest 9-30V Super Bright Low Power 1156 1141 1003 BA15S LED Bulbs with Projector Replacement for Turn Signal Lights, Amber Yellow

  • (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage: 9v-30v.
  • Fits: 1156 1003 BA15S P21W 1156A 1156NA 87 93 97 97A 97NA 199 631 1073 1095 1141 1195 1295 2396 3497 5007 5008 7506 12088 1295NA etc. Easy installation, plug and play..
  • Application: Turn Signal Lights, Brake Lights, Tail Lights, Side Marker Lights, Corner Lights, Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights..
  • Advantage: Non-polarity design, 300% brighter than original halogen bulb,full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature, built in Constant Current IC for Longer life span & Low Power Consumption..
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you..
Check Stock

iBrightstar Newest 9-30V Super Bright Low Power 1157 2057 2357 7528 BAY15D LED Bulbs with Projector Replacement for Turn Signal Lights and Brake Lights, Amber Yellow

  • (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb,Working Voltage: 9v-30v.
  • Fits: 1157 BAY15D 1157 1157NA 1157A 1178A 1196 2057 2057A 2357 2357A 2357NA 2397 7528 etc. Easy installation, plug and play..
  • Application: Turn Signal Lights, Brake Lights, Tail Lights, Side Marker Lights, Corner Lights, Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights..
  • Advantage: Exclusive design, 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption..
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you..
Check Stock

ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit

  • Easy-to-use kit simplifies installation of your ButtKicker LFE.
  • Allows ButtKicker LFE to be placed simply and securely on whatever furniture you are going to be using.
  • Attaches directly to the leg of your couch or chair, while sitting on rubber isolators.
  • Includes five additional rubber isolators, drastically improving the performance of your ButtKicker LFE.
  • Kit comes with all the necessary mounting hardware, and a handy wrench.
Check Stock

Smoke LED Side Marker Turn Signal Lights Replacement for BMW E46 E60 E82 E83 E88 E90 E91 E92 E93 X1 X3 325i 328i 335i 525i 528xi 530xi & more - Driver & Passenger Side Turn Signal Lamp Assembly

  • REPLACeMENT TURN SIGNAL LIGHTS - High quality side marker lights make your vehicle more visible to other motorists in darkness. If your side marker light assembly fails, you will need to replace it to ensure the safety of yourself and others. The unique light design will make your car more conspicuous..
  • VEHICLE COMPATIBILITY - This side turn signal light Replacement for 2008-2013 BMW E82 E88 (128i 135i 135is), 2002-2005 BMW E46 (325i 325xi 330Ci 330i 330xi), 2006-2011 BMW E90 E91 (328i 328i xDrive 335d 335i 335i xDrive 328xi 335xi 323i 325Ci 325i 325xi 330Ci 330i 330xi), 2007-2013 BMW E92 E93 (328i 328i xDrive 335i 335is 335i xDrive 328xi), 2004-2010 BMW E60 E61 (528i 528i xDrive 535i 535i xDrive 550i M5 525i 525xi 530i 530xi 525i 530i 545i), 2004-2010 BMW X3 (E83) SUV & More..
  • PROFESSIONAL DESIGN - This sequential turn signal Lamp expertly crafted from premium materials, designed to match rigorous quality standards, impermeable to dust, moisture, snow or heavy rain. Adopt advanced 2835 SMD LED lamp bead technology, synthesized by 18 SMD LED lamp beads, give you the maximum brightness..
  • WATERPROOF PERFORMANCE & EASY INSTALLATION - IP65 Waterproof rating. The led side marker lights is no more drilling needed, simply remove your marker light and unpl....
Check Stock

PBYMT 4PCS Motorcycle Bullet 24 LEDs Front Rear Turn Signal Light SMD Blinker Indicator Compatible for Honda Yamaha Suzuki Kawasaki Harley Bobber Chopper (Gloss Black)

  • ▶FITMENT - Aftermarket bullet turn signal light compatible for all universal 12V motorcycles / motorbikes with 10mm holes fairing.The turn signals may flash faster than normal on some models. If a slower flash rate is desired,the load resistor is required..
  • ▶HIGH POWER LED TURN SIGNAL Light - Each turn signal comes with 24 pieces of high quality SMD chips to deliver brilliant and stable color, highly visible,keeping you safer on the road and providing new lighting pattern..
  • ▶EXCELLENT PERFORMANCE - Comes with new-designed circuit protection devices,prevent excessive current,durable in use.
  • gloss black hosing,stylish and add a high-end visual punch to your motorcycle..
  • ▶3 WIRES CONNECTION - Black Line for ground,White Line for running lights,Yellow Line for signal lights..
  • ▶PACKAGE INCLUDED - 2 x Front Bullet Turn Signal Lights.
  • 365-day-warranty.Instruction NOT Included..
Check Stock

MAOPINER 4Pack Ceiling Vibration Damping Mounts, Spring Vibration Isolator for Soundproof and Shockproof for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • Premium Material: The red part of the ceiling vibration damping mounts is made of silicon instead of rubber, better functioning in absorbing vibration. And also the silicon applied is qualified, safe and environmentally friendly material..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base of the mechanical vibration damping pads has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock