ReviewsSmd Waterproof Module

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

Set 7-Color 48-SMD Scanning LED 22" Knight Rider Strip Light Turn Signal Car Truck Interior Lighting Decoration Compatible with Chevrolet Ford Toyota GMC Dodge Jeep Honda Nissan Lexus

  • Manufacturer Warranty is Valid for Purchasing from Astra Depot ONLY.
  • 1 piece 22 inches long super bright 48 RGB type SMD LED strip.
  • Package includes: Package Includes: 1 piece 22 inches Long Super Bright 48 SMD RGB type LED Strip.
  • 1 Piece Wireless Remote Control (60 ft Range). *Note: color of the remote control is randomly printed.
Check Stock

mxuteuk 2pcs AC 110V/120V Coil 8 Pin 10A DPDT LED Indicator Electromagnetic Power Relay General Purpose JQX-13F-DZ-AC110V

  • The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A..
  • Using SMD optocoupler isolation, strong driving capability, stable performance.
  • Fault-tolerant design, even if the control line is broken, the relay will not move..
  • The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient..
  • The Module can be set by jumper high or low trigger..
Check Stock

Valefod DC 5V Relay Module 1-Channel Relay Switch with Optocoupler Isolation High/Low Level Trigger, Pack of 10

  • 【Control Devices】The 1-channel relay module uses genuine high quality DC5V relay and SMD opto-isolator supporting high/low level trigger, widely apply to control various AC/DC appliances, and other devices with large current..
  • 【Load Range】NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Trigger current of opto-isolator: 5mA..
  • 【Fault-tolerant Design】The relay will not operate even if the control line is disconnected..
  • 【Universal Interface】Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
  • 【High Compatibility】The relay module can be controlled directly by 5V logic signals from microcontroller(8051, AVR, PIC, DSP, ARM, Raspberry Pi, MSP430, TTL logic etc).
Check Stock

Ampper White LED Rock Light for Bed Track 60 LEDs Cargo Pickup Truck Bed Lighting Kit W/ Switch Fuse for Truck Bed Foot Wells Under Car Rail Light and More 20 Pcs

  • High Brightness & High Quality: composed of 2 strips / 20 modules with 60 5730 SMD ultra-bright LEDs provide plenty of lights, up to 30,000 hrs....
  • Newest Design: the module is small in size only 0.25" thick makes them extremely easy to hide, unlike others light, this item is almost invisible....
  • Waterproof: the lights can be get wet, against rain drops, snow, dirt and sand, withstand harsh weather conditions like rain, snow, etc. But we do not....
  • Widely Applicable (12V Power Source): can used as pickup truck bed light, cargo lighting, foot wells light, under car light, rail light, RV awning....
  • Easy to Install: equiped with on / off switch, fuse, simplified splitter wiring harness and reliable 3M adhesive, just hook the harness and peeled to....
Check Stock

LightingWill 10pcs Pack Strip to Strip Unwired Gapless Solderless Snap Down 2Pin Conductor LED Strip Connector for 8mm Wide 3528 2835 Single Color Flex LED Strips

  • 2 pin connector for 8mm wide SMD3528 2835 single color LED strip (Not suitable for high intensity 120LEDs/M strips).
  • Working Condition: Can be able to stand up to 4A current and 0-24V voltage.
  • Heat resistance level from -20 ~ 100 degree C..
  • Strip to strip unwired gapless connector,solderless quick snap down,.
  • Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
  • Package includes: 10x 2pin 8mm SMD3528 2835 Led strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors.
  • Search B01DM7H5B4 for 10mm SMD5050 single color LED strips. connector.
Check Stock

Submersible LED Lights Flameless LED Candles Tea Lights 1.5

  • Widely Use Underwater Led Lights: Re-usable, waterproof, wireless submersible LED lights, perfect for any water filled table centerpiece and adding accent lighting on a party, wedding and event. Placed in vases,pools, fountains, ponds, ice buckets and waterfalls..
  • Super Bright RGB LED Lights: This 1.5inch LED Light with 3pcs SMD5050 RGB LEDs, 1pc SMD2835 Pure White LED, 1pc SMD2835 Warm White LED. It is Much more brighter than any small submersible LEDs with similar or smaller sizes. We are professional in the lighting design. pure white or warm white will bring very peaceful lighting. Multicolors lighting will colorful your decoration..
  • Remote Controlled,Multiple Colors& Multiple Modes: Package come with 2pcs infrared remote controllers,one remote can order all the lights. You can choose 13 different static colors and 4 color changing programs(Flash/Strobe/Fade/Smooth), Brightness and color-changing speed are adjustable. which bring cool and magic atmosphere as your wish..
  • 100% Waterproof Design IP68 : We design it to be 100% waterproof. If you want to active the light. You have to twist it tightly. And when it closed well. It could be 100% waterproof. The rubber O-ring will fully embedded . They will work fine under 1meter deep water..
Check Stock

LightingWill 10pcs Pack L Shape Solderless Snap Down 2Conductor LED Strip Connector for Right Angle Corner or 90 Degree Connection of 8mm Wide 3528 2835 Single Color Flex LED Strips

  • 2 pin connector for 8mm wide SMD3528 2835 single color LED strip (Not suitable for high intensity 120LEDs/M strips).
  • Working Condition: Can be able to stand up to 4A current and 0-24V voltage.
  • Heat resistance level from -20 ~ 100 degree C..
  • L shape for corner or turning connection, solderless quick snap down.
  • Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
  • Package includes: 10x 2pin 8mm SMD3528 2835 Led strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors.
  • Search B01DM7H5B4 for 10mm SMD5050 single color LED strips. connector.
Check Stock

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities.
  • Support up to six channels of data reception.
  • the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded..
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)..
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc..
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter.
Check Stock

GIGABYTE Z790 AORUS Elite AX (LGA 1700/ Intel Z790/ ATX/ DDR5/ Quad M.2/ PCIe 5.0/ USB 3.2 Gen2X2 Type-C/Intel WiFi 6E/ 2.5GbE LAN/Q-Flash Plus/PCIe EZ-Latch/Gaming Motherboard)

  • Intel LGA 1700 Socket: Supports 13th and 12th Gen Intel Core Series Processors.
  • DDR5 Compatible: 4*SMD DIMMs with XMP 3.0 Memory Module Support.
  • Commanding Power Design: Twin 16+1+2 Phases Digital VRM Solution with 70A Power Stage.
  • Cutting-Edge Thermal Design: M.2 Thermal Guard III, Fully Covered MOSFET Heatsinks, PCIe Ultra Durable Armor, 6-Layer PCB.
  • Next Gen Connectivity: SMD PCIe 5.0, 4* PCIe 4.0 x4 M.2, USB 3.2 Gen 2x2 Type-C.
Check Stock

Second Chance for Christmas: A Sweet Romantic Comedy Novella

  • 1 set of remote control RGB LED knight rider flashing light strip kit with 7 kinds of color and 130 distinct flash patterns, for car interior and exterior decoration..
  • 7 colors for option, Red (R), Green (G), Blue (B), Yellow (G+R), Magenta (R+B), Cyan (B+G), White (R+G+B)..
  • 130 Distinct flashing patterns.Flashing color and speed adjustable.
  • This LED scanner light bar can be commonly used on vehicles under hood, front grille, tailgate, trunk, cargo area, under spoiler, etc...
  • Package includes: 1x 48-SMD RGB type LED strip, 1x control module and 1x wireless remote control.
Check Stock