ReviewsSmooth Shank Lag Bolts

Titan Attachments Hitch Mounted Ripper V2 CAT 0 and CAT 1 Trenching Soil

  • Shear bolts on the shank protect your hitch, shank, and machine..
  • Recommended for use with CAT 0 and CAT 1 tractors..
Check Stock

LaBear 3/8\ Drive to 1/4\ Hex Drive Quick Change Impact Adapter (3/8\DR to 1/4\H)

  • Fits: 1/2” Lag bolts (Hard Heads), 5/8”, 3/4”, & 1/2” square headed bolts and nuts.
  • Handle Type: Non-conductive and Lightweight.
Check Stock

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
  • Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
  • Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
  • Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
  • Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.
Check Stock

Impact Grade Socket Wrench Adapter Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks,Sizes 1/4' 3/8' 1/2',Cr-V,Black,3-Piece

  • ☞ PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter set .1/4" 3/8" 1/2" Turns any power drill into a power nut driver Sturdy spring-loaded ball bearing holds sockets securely in place Sockets Snap-On Tightly and Won't Slip Off.
  • ☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site.
  • ☞Multifunction: 3Pcs1/4 3/8 1/2" Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
  • ☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most ....
Check Stock

Impact Grade Socket Adapter/Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks, Sizes 1/4\ 3/8\ 1/2\

  • ☞ PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter set .1/4" 3/8" 1/2" Turns any power drill into a power nut driver Sturdy spring-loaded ball bearing holds sockets securely in place Sockets Snap-On Tightly and Won't Slip Off..
  • ☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site..
  • ☞Multifunction: used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion.Provides versatility and convenience no matter which tool you chose to use. Great for the DIY, household maintenance, and most general repairs, not for industrial work. A great tool addition to any tool box set..
  • ☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most standard use ....
Check Stock

Kanto PX720 Articulating Full Motion TV Wall Mount for 42-inch to 100-inch TVs | Black

  • FULL MOTION DESIGN - Heavy-duty articulating arms allow you to safely extend your TV 31" from the wall and swivel it up to 90° in either direction, depending on screen size. Maintain a perfect viewing angle wherever you’re seated..
  • TOOLLESS TILT - An easy-to-use, toolless tilt mechanism allows you to angle your TV up to 15° forward or 3° backward in order to reduce glare and improve line-of-sight when mounting above eye-level. The tilt head can be tensioned to allow for on-the-fly adjustments or to lock your TV in place at the desired angle..
  • HASSLE-FREE INSTALLATION - Use the provided drill template to accurately mount your TV to brick, concrete or wood studs up to 24" apart. A carefully organized hardware box is also included with all the lag bolts, anchors, washers and spacers you’ll need for a custom fit installation..
  • SAFETY FIRST - The PX720's high-grade steel construction and heavy-duty lag bolts safely support 150 lb., even at full extension. Mount up to a 100" TV without hesitation..
  • CLEAN SETUP - In addition to providing a low-profile solution for displaying your TV, the PX720 comes with wall plate covers and cable management raceways to ensure your viewing area remains tidy..
Check Stock

5 Steps Outdoor Hand Rails for Steps, Black Wrought Iron Handrail Kit

  • Railings for Outdoor Steps- This Iron Stair rail is designed to be a hand rail outdoor (also great replacement for wooden handrails)..
  • DIY Iron Handrail- Designed to be installed yourself!.
  • Versitle Installation- Can be used as outside hand railing, outdoor handrails, stair rails, hand rails for stairways, front porch hand rail (we provide flat mount bracket for free), etc.
  • Parts Included- Anchor bolts, lag screws, masonry drill bit & hex screw bit (some 2021 inventory in warehouse has older gold version anchors and no lag screws. Contact us for free hardware replacement if needed..
  • NOTE: For sale is a 5.5 feet railing (Intended for 4-5 steps).
Check Stock

Carriage Bolt 18-8 Stainless Steel 1/2'-13 x 18' Qty-25

  • A carriage bolt has a domed or countersunk head and the shank is topped by a short square section under the head of the bolt..
  • The square section grips into the part being fixed, preventing the bolt from turning when the nut is tightened..
  • Carriage bolts are often used to fasten wood panels or board to masonry or to one another..
  • The square shank of the bolt allows it to lock into place when inserted into a round hole in wood or a square hole in a metal strap, the unthreaded square shank pulls into the wood creating a tight connection..
  • 18-8 Stainless steel is corrosion and rust resistant. 18-8 Stainless steel is considered the fastener industry standard..
Check Stock

#8-32 X 7/8'' Stainless Phillips Oval Head Machine Screw, (100 pc), 18-8 (304) Stainless Steel, by Bolt Dropper

  • OUR PROFESSIONAL HEX LEG BOLT are often located in a position that makes bolt kit susceptible to corrosion and therefore is an obvious choice both in terms of weight saving, appearance, and performance..
  • FANTASTIC CORROSION RESISTANCE. Fasteners kit is used widely in the home and office appliance, communication equipment and other machinery industry..
  • WE OFFER A GREAT METRIC HARDWARE ASSORTMENT: Hex Bolts, Machine Screws, wood screws, Carriage Bolts, Lag Bolts, Wood Screws, Sheet Metal Screws. Just select a couple and Add to Cart!.
  • CHOOSE FASTENERS KIT SET FOR GENERAL PURPOSE USE. These bolt assortment intended for both manual and automatic screwing, twisting and tightening with the maximum force developed by any bolt tool..
  • STAINLESS STEEL BOLT SET ARE RELIABLE AND DURABLE and are used in many applications. It is widely used both for private repairs and for fixing parts of large production facilities..
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • ...coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
  • VIDEO INSTRUCTIONS & SUPPORT : Over 10 Videos to help you mount different items safely..
  • FULL PACKAGE : Hex Shank Drill bit, screws, washers are included so you DONT need to to buy them separately..
  • METAL STUD : Can be used for mounting on Metal stud walls.
Check Stock

Heavy Duty Storage Racks Holds Up To 480lbs by Delta Cycle & Home - Wall Mounted Solution for Garage, Basement or Pantry - Premium Steel & Adjustable Lumbar Rack Organizer - Easy-to-Install

  • Heavy Duty Lumber Storage Rack :: Delta's wall mounted rack is crafted from premium steel with a hammered powdercoat finish. The shelving hardware includes lag bolts and locking pins that bare up to 480 lbs of weight, or 160 lbs per individual shelf..
  • Wood Rack Dimensions & Specifications :: Package includes 2 upright wall racks, 6 arm brackets, 2 rack adapters, and all necessary lag bolts and locking pins. When fully installed, the measurements are 20.5 inches H x 16 inches D x 32 inches W. Wood not included..
  • Designed To Adjust For Your Needs :: Each steel arm is adjustable at 2" height intervals. Joining clips are included to connect an additional rack. Mount anywhere around the home to a stud in the wall..
  • Free Up Valuable Floor Space :: Store excess garage or workshop items such as lumber, paint, and tools. Makes a convenient pantry organizer. Fix up your outdoor shed to store a ladder & bins. Create racks for storage above your washer & dryer..
  • Premium Support In The USA :: We provide personal customer support and respond to all messages and questions in a timely manner. We offer a limited lifetime warranty that covers defects in workmanship and materials..
Check Stock