ReviewsSnowmobile Trailer Fender Kit

Caliber TraxMat Snowmobile Traction 13210 54-inch

  • Protect your trailer deck or ramp from damage caused by studded snowmobile tracks.
  • Provides excellent traction and braking control when loading and unloading your snowmobile.
  • 16-inch wide x 54-inch long TraxMat includes all stainless-steel hardware for installation.
  • Versatile design works on solid surface ramps and tilt, V-front and enclosed trailer decks.
  • Made in the USA, limited lifetime warranty.
Check Stock

Partsam 12V Waterproof Square LED Trailer Tail Light Kit Clear Lens Red Trailer Brake Stop Tail Turn Signal Running Lights License Kit for Camper Truck RV Boat Trailer Snowmobile Marine Under 80'

  • ...plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2″ centers.
  • 2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80″ trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side).
  • For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side).
  • Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee.
  • White+ Yellow, front side works and is high brightness.
  • White+ Brown, THREE sides work, front side is low brightness.
  • White+ Green, front side works and is high brigh....
Check Stock

LINKITOM Trailer Lights Welded Mount Steel Boxes Kit w/6 inch LED Oval Tail Lights & 2 inch LED Red Round Side Lights w/ Grommet wire connectors 2 Pack

  • Trailer Light Kit: includes 2 X Welded Mount Heavy Duty Steel Boxes, 2 X 6" Oval Red LED Trailer Lights w/ Rubber Grommets and wire connector.
  • 2 X 2" Round Red LED lights w/ Rubber Grommets.
  • Steel Trailer Light Boxes: Made by 14 gauge heavy duty steel, protect the LED tailer light effectively. The steel box housing is design of excellent moisture-proof sealed and IP 67 waterproof makes it be definitely waterproof..
  • Super Bright: Led Trailer Lights has bright LED diodes with super high visibility, light up the rear or side of your vehicle or trailer in daylight, midnight, raining or fog days. Improve the drive security and avoid accidents..
  • Brake& Turn Taillight: Function as tail lights, turn/brake lights and side marker light. Fit for heavy truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc.,.
  • Simple Installation: Led trailer lights with black rubber grommet are mounted on the box. wiring them for installation to the corresponding wire on trailer. And then weld on the light box to the trailer frame..
Check Stock

TCTAuto LED Trailer Fender Lights 3/4" Amber Red Bullet Type LED Marker ClearanceLight Left & Right Clear Len

  • Perfect double face led lights assembly to mount them on your truck trailer side fenders to mark the widest point..
  • Using as the fender functions as both the amber front and red rear clearance lights for trailer applications more than 80" wide..
  • Contains DOT Certified diodes each on a molded durable plastic bracket.SCREWS ARE NOT INCLUDED.
  • 2-Wire design, Black is positive and White is negative. Installs on left fender (driver's side) of trailer & right fender (passenger's side) of trailer.
  • We offer 2 Years Warranty of all the products in our store, freely contact us if you have any questions..
Check Stock

Partsam LED Trailer Fender Light Set/2 - Double Face 4" LED Marker Clearance Lights 7Diode

  • Pair Double-face dual-light Pre-Wired Fender Clearance Trailer Light Assembly - Driver Side & Passenger Side. Wonderful and perfect lights to mount on your truck or trailers side fenders.
  • Function as: both the amber front and red rear clearance lights for trailer applications more than 80" wide. amber Clearance light facing forward and red Clearance light facing backwards.
  • Size: 8-1/4" long x 4" wide x 1 3/4" high approx. LED Qty: 7 Diodes on each light.The LED lights are 3/4" by 4" approx.Each LED is directly wired and water-tight sealed..
  • Each light is on a black, molded plastic bracket.great replacement for traditional light units on trailer.
  • perfect replacement for an enclosed trailer fender lights.
  • Both Right Side and Left Side are included.Typical trailer light, works as you would imagine.
  • Day and Night they are highly visible which make for safer traveling.
Check Stock

Buyers Products 8590245 Poly Fender

  • Ribbed Poly Fender: This durable and lightweight fender fits trucks with wheels up to 24.5".
  • Constructed from molded polyethylene, it won't rust or dent and can handle wear and tear from daily use.
  • Protect Your Tires: The molded ribbed design provides added strength and reduces spray from road.
  • This ribbed poly fender protects your tires without adding a lot of additional weight. Mounting kit sold separately.
  • More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products—it’s amazing what Buyers Products can do for your truck.
  • We Do Things The Right Way: We design products like we we’re building them for ourselves, because we are. Our teams are staffed with engineers and experts who know how to make a product exceptional.
  • Durable and Dependable: Founded in 1946, Buyers Products has become a leader in the truck equipment industry though our commitment to customer care, innovation, and value across our range of products.
Check Stock

CZC AUTO 12V LED Submersible Trailer Tail Light Kit for Under 80 Inch Boat Trailer Marine with 18G Pure Copper Wiring Harness Kit (Exclusive Trailer Light kit)

  • CZC AUTO 12V Submersible LED Trailer Light Kit includes 2 combination stop, tail, turn signal lights, two amber LED marker lights ,25-ft wiring harness ,Aluminum license plate bracket instead of plastic license plate for more sturdy, NO bending and Long years lifetime..
  • 18 Gauge 100% pure copper wire harness ensure trailer lights LED do good job underwater! All diodes are LED, NOT Any incandescent bulbs! 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and Longer Lifetime！The waterproof trailer tail lights comply with DOT FMVSS108 certificate approval.
  • Excellent waterproof/Submersible lights for Boat trailer. Sonic Welding Sealing Technology ensures sealing solidity of the LED tail lights. Every possible gap is sealed well with marine grade glue, such as wires entrance holes and edge of the lens.
  • Application for under 80 Inch width towing vechile,like boat trailer truck snowmobile,etc..
  • CZC AUTO, a reliable brand in trailer lights industry, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues. PlEASE NOTE: Any problem in using our Submersible trailer tail lights, simply contact us, your problem will be solved within 24 HOURS.
Check Stock

LIMICAR Trailer Lights, Stop Turn Tail Truck Trailer Light Kit & Trailer Wiring Harness Kit, Red Amber Trailer Marker Lights, 3rd Brake ID Light Bar, Taillights for Vehicles Camper Snowmobile RV

  • BRIGHT & ENERGY-EFFICIENT: Advanced LED combination lights with better heat distribution, no glare, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather..
  • PACKAGE INCLUDES: Includes 2 square combination tail lights, 6 side fender marker lights, 11LED 3rd brake identification light bar, wiring harness, license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once..
  • PRACTICAL FUNCTIONS: Functions as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar..
  • WATERPROOF: Adopts welding technology for better waterproof performance. The screws have been removed from the lampshade to prevent water invasion better, effectively protects the tail light from sand, dust, dirt, water or snow..
  • UNIVERSAL FIT: Ideal for most vehicles equipped with 12V power supply such as trailers, campers, trucks, Dump Truck, snowmobile, tractors, semi-trailer, bus and other vehicles with a width of 80 inches (more or less)..
Check Stock

CURT 53201 Auxiliary Automotive LED Light Strips for Hitch Cargo Carrier, Bike Rack, 2-Pack, red

  • This new version 12v Trailer Light Kit includes 2 combination tail and turn signal lights, 2 amber LED clearance marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included..
  • IP67 Waterproof and Submersible, It is completely sealed, it mean no water can enter inside to damage the circuit board, it can work long hour in rainy days, fog day or snow day, it is totally submersible.
  • Compare with other low profile tail lights, this tail light's SMD 5050 lamp beads produces a super fashion and more brighter light, no glare, Up to 50,000 hrs life expectancy, improve the safety on road.
  • Compliant with DOT standards, application for under 80 Inch width towing vehicle, like truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile, etc..
  • 25ft wiring harness( 21.65ft length wire harness and 3.93ft wire harness ), so that it is long enough to reach end of trailer, install instruction included..
Check Stock

BGGTMO Trailer License Plate Bracket Holder- ATV/RVs/Boat/Jet Ski Utility Trailer Metal Car Tag Frame and Black Aluminum Cover Mounting Kit with Screw Caps

  • Trailer License Plate Holder- The aluminum metal trailer light bracket is designed for replacing your plastic trailer license plate light holder, prevent damage and loss of your utility boat trailer, PWC, Snowmobile, ATV, Jet ski, RVs license plate, make the trailer frames last longer..
  • Flexible Trailer License Plate Mount- Sturdy thickness aluminium to keep strong and No bending easily, ensure no rusting and longer years lifetime. The installation size for the bracket is from 1-5/8" to 2-1/2", and the installation size for the license plate is from 4" to 8-5/8", suitable for license plate locks of various models, such as trucks, trailers, motorcycles, etc..
  • Black Aluminum License Plate Frame- The matte black license plate cover adopts rustproof aluminum, smooth and high gloss surface. 1.3mm thickness, strong and durable. The four-corner round design will not scratch your hands. Heavy duty metal license plate frame, with black screw cap, is suitable for the front or rear license plate of various colors of cars.
  • Easy To Install- Our trailer plate bracket kit matches with license plate light of size 2"....
Check Stock

LIMICAR Trailer Lights, Upgrade IP68 Halo Glow Trailer Light Kit, Brake Stop Turn Tail License Plate LED Trailer Lights with 25ft Trailer Wiring Harness Kit for Truck Marine RV Boat Camper

  • UNIVERSAL FIT: LED Boat Trailer Lights ideal for most vehicles with DC 12V power supply. Widely used for 80 Inch width tractor, such as camper, trailer, truck, dump truck, tractor, boat, bus, pickups, utility boat, lorry, van marine, caravan, snowmobile, etc..
Check Stock