ReviewsSnowmobile Trailer Tongue Extension

CURT 28204 A-Frame Trailer Jack, 2,000 lbs, 15 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
  • VERTICAL RANGE. This trailer tongue jack allows for 15 inches of vertical movement and can be fully retracted for towing (9-1/4-inch retracted height, 24-1/4-inch extended height).
  • EASY OPERATION. This trailer tongue jack features a side-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
Check Stock

CURT 28250 A-Frame Trailer Jack 5,000 lbs 14-1/8 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This A-frame trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • VERTICAL RANGE. This trailer tongue jack allows for 14-1/8 inches of vertical movement and can be fully retracted for towing (10-3/8-inch retracted height, 24-1/2-inch extended height).
  • EASY OPERATION. This trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This A-frame trailer jack can be bolted into place or welded onto the trailer tongue (hardware not included).
Check Stock

CURT 25138 Straight Tongue Trailer Coupler for 3-Inch Channel, 2-In Hitch Ball, 3,500 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto an A-frame trailer tongue and couple to any standard 2-5/16-inch diameter trailer ball.
  • SECURE COUPLING. The sleeve-lock latch mechanism of this trailer tongue coupler fully encompasses the trailer ball when coupled, providing maximum security and safety for towing.
  • ENHANCED SECURITY. The sleeve-lock latch accepts a safety pin or coupler lock that passes completely through the neck of the coupler, ensuring maximum security for heavy-duty loads.
  • HIGH-STRENGTH. Constructed from high-strength steel with a solid steel neck, this trailer ball coupler is rated as a class 4 trailer coupler and has a capacity of 12,500 lbs. gross trailer weight and 1,875 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this A-frame tongue trailer coupler is finished in a durable black powder coat and makes a great boat trailer coupler.
Check Stock

NovelBee 2-5/16\ Ball Class IV A-Frame Trailer Coupler with Powder Coated Black,14000LBS Capacity

  • PRECISE FIT. This trailer coupler is designed to mount onto an A-frame trailer tongue and couple to any standard 2-inch diameter trailer ball.
  • SECURE COUPLING. The sleeve-lock latch mechanism of this trailer tongue coupler fully encompasses the trailer ball when coupled, providing maximum security and safety for towing.
  • ENHANCED SECURITY. The sleeve-lock latch accepts a safety pin or coupler lock that passes completely through the neck of the coupler, ensuring maximum security for heavy-duty loads.
  • HIGH-STRENGTH. Constructed from high-strength steel with a solid steel neck, this trailer ball coupler is rated as a class 4 trailer coupler and has a capacity of 7,000 lbs. gross trailer weight and 1,050 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this A-frame tongue trailer coupler is finished in a durable black powder coat and makes a great boat trailer coupler.
Check Stock

CURT 28570 Direct Weld On Heavy-Duty Trailer Jack, 8,000 lbs. 15-1/4 Inches Vertical Travel, Black

  • HEAVY-DUTY STRENGTH. This heavy-duty trailer jack is rated to support up to 8,000 pounds trailer tongue weight (7,000 pounds lift capacity).
  • VERTICAL RANGE. This trailer tongue jack allows for 15-1/4 inches of vertical movement and can be fully retracted for towing (24-1/4-inch retracted height, 39-1/2-inch extended height).
  • EASY OPERATION. This heavy-duty trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat finish.
  • SECURE INSTALL. This heavy-duty trailer jack is designed to be welded directly onto the trailer tongue (hardware not included).
Check Stock

LIMICAR Trailer Wiring Harness Kit, 25ft Trailer Wire, Trailer Wiring Harness with 4 Flat Extension Connector, 4 Pin Flat Wishbond Trailer Wiring for Utility Boat Trailer Light Kit

  • 25FT Male & 4-Flat Female Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (25' & 4') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 25' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
Check Stock

LIMICAR Trailer Wiring Harness Extension Kit, 36ft Trailer Wiring Harness with 4 Flat Extension Connector, 28' Male & 8' Female with 4 Pin Flat Wishbond Trailer Harness for Utility Boat Trailer Lights

  • 36FT (28' Male & 8' Female) & 4-Flat Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (36') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 36' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
  • Widely Application: Suitable for marine boat trailer, horse trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug). Not compatible with motorcycle....
Check Stock

Fastway Flash 48-00-8600 ISBM Integrated Scale Ball Mount with 6 Inch Drop, 2 Inch Shank, and Chrome Plated Balls (6\ Drop)

  • The FLASH Integrated Scale Ball Mount features a mechanical tongue scale built into the ball mount that measures the tongue weight of your trailer load, providing safer, more confident towing..
  • When loading a trailer, the tongue weight should be 10-15% of the total trailer weight. The FLASH ISBM makes it easy to know if your trailer is loaded properly by showing how much of the trailer weight is on the tongue..
  • Made to fit your 2" receiver, includes both 2” & 2-5/16” chrome hitch balls and has a 1,000 lb tongue / 10,000 lb max trailer weight..
  • The FLASH ISBM easily handles the heaviest of loads, at about half the weight of comparable steel ball mounts. This makes carrying, adjusting, and installing your FLASH ISBM easy and comfortable..
  • Made from aircraft-grade aluminum, providing corrosion resistance and unmatched strength and durability..
Check Stock

CURT 28272 Trailer Jack Foot, Fits 2-Inch Diameter Tube, Supports 2,000 lbs

  • TRAILER STABILITY. Add stability to your trailer with this simple but sturdy trailer jack foot. It attaches to the trailer jack and allows for increased stability of the trailer tongue when parked or loading.
  • RELIABLE STRENGTH. Perfect for a wide variety of trailer types, this trailer jack foot plate is rated to support up to 2,000 pounds tongue weight.
  • VERSATILE DESIGN. Great for use as a trailer jack foot replacement, the versatile mount fits virtually any trailer jack with a 2-inch diameter tube.
  • INCLUDED PIN. For immediate installation, this trailer tongue jack foot comes with a safety pin included. The safety pin secures the foot onto the jack and can quickly be removed if needed.
  • CORROSION-RESISTANT. This trailer support jack foot is constructed from zinc-plated steel for long-lasting corrosion resistance in spite of rain, dirt, road grime and other elemental threats.
Check Stock

REYSUN Trailer Hitch Riser 2 inch Receiver Hitch Extension with 4-1/4 inch Rise/Drop Solid Shank，Hitch Pin Kit Included

  • ★Please check the size carefully before purchasing. RECEIVER SIZE: This trailer hitch extension bar has 2 inch by 2 inch industry-standard fit.
  • ★HITCH RISER OR DROP HITCH: 4.25 inch drop or rise can be turned up or down to level the towing system..
  • ★ADJUSTABLE LENGTH: 2 pin holes design makes this adjustable trailer hitch have 2 active length and avoid interfere with the vehicle bumper.
  • ★SOLID RECEIVER TUBE: Gross/tongue capacity: 6000 lbs/600 lbs, Heavy duty for towing trailer, boat, camper.
  • ★CORROSION RESISTANT: Made of strong steel with a durable black powder coat finish, super corrosion resistant.
Check Stock

Boat Trailer Jack,Heavy Duty Trailer Jack with 6 Inch Dual Wheels,1500 lbs Swivel Trailer Tongue Jack,Bolt-on Trailer Jacks,10\ Vertical Travel, Black

  • 【Corrosion Resistant Finish&Bearing Capacity】Boat Trailer Jack body is made of high quality black powder-coat corrosion-resistant steel,Zinc finish on the rest.Overall heavy-duty steel structure, reliable strength, long-lasting corrosion resistance.Features 1500 pound bearing capacity..
  • 【Adjustable Height&Easy to Operate】 This trailer tongue jack allows 10 inches of vertical movement (12.6 inches retracted height, 22.6inches extended height).The ergonomic hand crank handle is easy to grasp and comfortable to hold,which allows you to easily swing jack in place,The height of the whole dual wheel jack will can be stretchable from 24.8inch to 34.8inch..
  • 【Double Wheel Design】 For easier coupling and positioning of your boat trailer,each boat trailer jack is equipped with 6inch diameter double wheel at the base, can rotate 360 degrees,giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue.Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable..
  • 【Swivel Plate & Pull Pin Design】 For increased safety while towing and ease of use, this trailer jack stand is equipped with a swivel bracket,can 360° swivel.the jack swings up and out of the way for....
Check Stock