ReviewsSocket Cap Bolt

Escape Climbing 34 Bolt Variety Pack | Durable Hardware for Rock Climbing Holds | Features a 3/8-16 Socket Cap Screw | Includes 2” 3” 4” and 5” Bolts | Designed for Indoor Use

  • HIGH QUALITY | Industrial grade steel bolts reduce corrosion and increase thread strength.
  • DURABLE | Manufactured with Cold-Forging techniques which result in higher fatigue resistance.
  • ADAPTABLE | Hardware designed and produced for indoor gyms and indoor home climbing walls.
  • VARIETY | Premium bolt variety pack includes 25 - 2” bolts, 5 - 3” bolts, 3 - 4” bolts, and 1 - 5” bolt.
  • DIMENSIONS | Steel bolts with 3/8-16 socket cap screw.
Check Stock

Escape Climbing 34 Bolt Variety Pack | Features a 3/8-16 Socket Cap Screw | Includes 2” 3” 4” and 5” Bolts | Designed Specifically for Rock Climbing Walls and Holds

  • HIGH QUALITY | Industrial grade steel bolts reduce corrosion and increase thread strength.
  • DURABLE | Manufactured with Cold-Forging techniques which result in higher fatigue resistance.
  • ADAPTABLE | Hardware designed and produced for indoor gyms and indoor home climbing walls.
  • VARIETY | Premium bolt variety pack includes 25 - 2” bolts, 5 - 3” bolts, 3 - 4” bolts, and 1 - 5” bolt.
  • DIMENSIONS | Steel bolts with 3/8-16 socket cap screw and are available in 1.5, 2, 3, 4, 5, and 6 inch bolts.
Check Stock

XianFeng 22100 Flywheel Locking Tool for 6.6L Duramax Engine with 36mm 3/4 Inch Wench

  • Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench.
  • Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant.
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

TeraFlex 09-02-22-110-000 Stabilizer (JL/JLU Falcon Nexus 2.2), 1 Pack

  • This kit Includes the CV Joint assembly, high-angle CV housing cap & boot, bolt flanges, socket head Bolts, 6mm Allen wrench..
  • Also includes low-friction CV grease engineered specifically for the high RPM needs of the JK CV joint..
  • The grease features high viscosity surface bonding characteristics required to properly adhere the grease to all moving surfaces..
Check Stock

Crescent Nicholson 4 Pc. Thread Restoring File Set - T33024

  • Ideal for restoring damaged or worn external threads on bolts and pipes.
  • Thread restoring files can be used with 8 different thread sizes, allowing you to find a true fit effortlessly.
  • 4-piece set offers 3 convenient file sizes for quick and effective application.
  • Color caps on tubes help identify the file type, so you can select the tool you need with ease.
  • Type 2 Red Cap: Ex. Fine/Ex. Coarse Bolt.
  • .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00 mm.
  • Used to restore damage or worn external threads on bolts, pipes, etc..
  • Each thread restoring file will work with 8 different thread sizes.
  • 11-12, 13-14, 16-18, 20-24 TPI Type 2 red cap: Ex. Fine/ex. Coarse bolt.
  • 9-10, 12-16, 20-27, 28-32 TPI Type 7 green cap: Regular pipe.
Check Stock

PQY Billet Aluminum Easy Fill Fuel Cell Gas Cap With 12 Hole Cell Bung and Gasket Sliver

  • Billet Fuel Cell Cap Assemblies are a unique answer to replacing your existing plastic fuel cell cap..
  • These cap kits are designed as a direct fuel cell cap replacement for any fuel cells with a 12-bolt, 5.343 in. bolt holes..
  • 12 bolt fuel cell cap Clear anodized for a trick look. Come with a rubber gasket for installing the bolt-on flange..
  • This fuel cell filler neck cap is CNC machined from 6061 billet aluminum..
  • PQY CUSTOMER SERVICE:If you have any problem ,please contact us and we will respond you on 24 hours except weekends and holidays..
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

Mutazu Chrome Frame Covers ABS Plastic for Suzuki Hayabusa GSXR 1300 (SC-10)

  • The Precision lower front engine cover is sculpted and defined for a clean appearance.
  • The cover conceals the lower portion of the frame, kickstand assemply, front engine stabilizer, floorboard mount, and the wiring leading to the voltage regulator.
  • Includes (1) lower frame cover and (1) 3/8-16 x 2.25" socket head cap screw.
  • Suggested for installation (not included): set of hex wrenches, set of hex bit sockets, and (1) torque wrench.
  • Compatible with Harley-Davidson: '17-'19 Electra Glides, Road Kings, Road Glides & Street Glides.
Check Stock

Harmonic Balancer Socket Tool 77080 19 mm Crank Bolt Socket for Honda 3 Times Momentum Power of Standard Impact Sockets

  • GREAT COMPATIBILITY: OAL 89mm, 1/2" square drive.
  • can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
  • SUPERIOR QUALITY: Made with heat-treated, impact quality-GB 40CR alloy steel which has longevity longer much than other ordinary steel..
  • PERFECT DESIGN: Provide more energy to removing the bolt for designed with more than 3 times the standard socket mass to direct..
  • EASY INSTALLATION: Easy to install and remove, can be perfect to install to your 19mm Hex Pulley Damper Bolt with the 19 mm Harmonic Balancer Socket..
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with this Harmonic Balancer Socket Tool, simply return it for a full refund in 30 days, no....
Check Stock

1/4\-20 X 3\ Stainless Flat Head Socket Cap Screw Bolt, (25pc), 18-8 (304) Stainless Steel, by Bolt Dropper

  • HIGH QUALITY STAINLESS: These Flat Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other hardware on the market today..
  • SCREWS THAT YOU CAN DEPEND ON: Our Flat Head Socket Cap Screws are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance..
  • GREAT TO KEEP AROUND: Bolt Dropper stainless hardware is great to have around for use in wood and wet environments. Bolt Dropper hardware is the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • DIMENSIONS: Diameter: 1/4" | Length: 3" | Threads per Inch: 20 | Thread Type: Coarse (standard) | Quantity: 25 pcs | Material: 18-8 (304) Stainless Steel..
  • LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE..
Check Stock