ReviewsSocket Ratchet Head

GEARWRENCH 57 Pc 3/8 Drive 6 Pt Mechanics Tool Set Standard & Deep SAE/Metric - 80550

Low profile and performance head ratchet with longer reach than most ratchets for added leverage and needs as little as 4.3° to move fasteners for....
Off-corner loading socket design for better grip and reduced fastener rounding.
Sockets are large hard stamped for easy identification.
The thin head allows the ratchet to snap on fasteners in hard to reach places and the tightest areas.
Bright, full polish chrome finish for easy cleaning, oil and dirt wipes right off.

Check Stock

TAGVIT 15 PCS Open End Interchangeable Torque Wrench Set, 9mm x 12mm Interchangeable Head Torque Wrench for Bicycle, Air Conditioning Maintenance, etc.(4-22 ft.-lb/5.4-30 Nm)

...e torque range is 4-22ft.-lb/5.4-30Nm. The interchangeable torque wrench adopts dual scale design to meet your different needs. The scale is clear and easy to read, not easy wear..
【Two Ways To Use】The square interface of the open end interchangeable torque wrench measures 9mm x 12mm, and can be used with a 1/4" ratchet head and Interchangeable open end adapters. The two use methods can be freely selected according to your needs..
【Reversible Ratchet Head】The 1/4 inch ratchet head included with the interchangeable torque wrench has a quick release button for quick installation and removal of the socket. By adjusting the paddle on the head of the ratchet head you can switch the direction of clockwise and counterclockwise use, which is convenient and quick..
【Easy To Use】The interchangeable head torque wrench has a safety lock ring. After pulling down the lock ring, turn it to set the required torque. After the setting is completed, release the lock ring, and the lock ring will automatically rebound to lock the torque value. When the set torque value is reached, the torque wrench will send click and vibration to remind to stop applying force to avoid damage to the wrench due to excessive torque..
【Package Includes】This 15 pcs open end inter....

Check Stock

uxcell 3/8\

【Set Included】28 pcs 1/4" hex socket, 4 pcs 3/8" hex socket, 3 pcs 1/4" star socket, 1 pc handle, 1 pc ratchet wrench, 1 pc extension bar, 1 pc socket adapter, 1 pc plastic gasket, 1 pcs storage case.
【CR-V Construction】Made of heat-treated chrome vanadium steel for strength and durability..
【Ratchet Wrench】72-tooth ratchet design works better in tight spaces and maintains maximum torque. Diamond pattern on the handle is ergonomic design that reduces slippage..
【Widely Application】Use to tight or loose bolts, nuts, screws for repairing at home, garage and the workshop..
【Easy to Carry】The bit socket wrench set was packed in a plastic storage box to help you keep the item organized and even easier to carry..

Check Stock

Durofix RW1216-3P G12 Series 12V Li-ion Cordless 3/8” 65 ft-lbs. Extended Ratchet Wrench Tool Kit

⚡Powerful Ratchet Motor - Electric cordless ratchet wrench offers 12 Volt Max motor, plenty torque at 40ft-lbs and Superior fastening speed with 230rpm to remove or install bolts (or nuts).Suitbale for truss installation, wedding stage construction, car repair, mechanical maintenance..
⚡LED Light - LED light on the front of the unit lighting the workplace for you in the dark.Battery indicator Lights on the side of the unit will let you know how much power you have left..
⚡Forward & Reverse Switch - There is a forward and reverse switch on the ratchet head, you can adjust the direction easily. The metal balls on 3/8 square head can help to fix the socket more sturdy, easy to disassemble..
⚡Anti-Slip Grip - Humanized designed soft rubber coated grip brings anti-slip grip experience. Only one button (On / Off Switch) touch for start and stop LED light working. LED light which helps you to see into dark places..
⚡Package Contents - A cordless ratchet wrench, 2 x 1500mAh batteries, 1 x fast charger, 1 x instruction, 7 sockets - 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm. During your use ratchet wrench,if you encounter any problems, please contact us in time, we provide 24 x7 online service..

Check Stock

NEIKO 03043A Right Angle 1/4-Inch Drive Mini Ratchet Wrench Screwdriver Bit and Socket Set | 17-Piece Set | Cr-V Steel | Dual Head | Low Profile | 90 Degree | Sockets Phillips Slotted & Torx Star

[LOW PROFILE]: This mini ratchet wrench has a 5.5-inch-long handle with an offset 90-degree angle ratchet driver is exceptional for working in small,....
[REVERSIBLE]: Quick reverse thumb lever and a 12-teeth reversible ratcheting mechanism allows switching between clockwise and counterclockwise....
[DURABLE]: All bits and sockets are constructed of chrome vanadium steel for extra strong durability and resistance to tool wear-out..
[DUAL HEAD]: The mini hand ratchet has a dual head design to allow a socket and driver bit simultaneously to cover fastening needs without having to....
[INCLUDES]: Mini ratchet and bit set comes with (2) organizers with common sized sockets, flatheads, screwdrivers, and torx star bits: 1/4-Inch Drive....

Check Stock

Kuryakyn 7502 Motorcycle Foot Controls: Adjustable Mustache Bar for 2004-19 Harley-Davidson, Yamaha Motorcycles, Chrome

... head cap screw, (2) 7/16”-14 acorn nut, (4) .875” X .47” ID X .063” washer, (2) 3/8” thick wave washer, (2) 3/8” thin wave washer, (2) 3/8”-16 X 1” socket head cap screw, (2) 5/16”-18 X 1” socket head cap screw.
suggested tools for smooth installation:Set of combination wrenches, socket set and ratchet, set of hex wrenches.
This Kuryakyn part is most compatible with Harley: ’86-’17 Softail & Rocker Models, Yamaha: 99-'14 Road Star Models, '08-'17 Raider Models & '98-'16 V Star 650 Models.

Check Stock

TEKTON 3/4 Inch Drive 6-Point Impact Socket Set, 21-Piece (3/4-2 in.) | 4899

Includes 16-pc. 3/4 in. drive 6-pt. sockets: 3/4, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2 in..
1-pc. 3/4 in. drive sliding T-head breaker bar: 18 in..
2-pc. 3/4 in. drive impact extension bars: 4, 8 in..
High-performance chrome vanadium steel sockets can be used with impact wrenches.
6-point, high-torque socket design grips flat sides of fastener heads, not corners, preventing round-off.
18 inch, 24-tooth, oval-head ratchet with quick-release drive tang locks onto sockets.
18 inch sliding T head breaker bar loosens frozen fasteners.
All parts are protected by a corrosion-resistant black phosphate finish.
Meets or exceeds ANSI performance standards.

Check Stock

GEARWRENCH Angled Tip Pry Bar, 31\ - 82431

Product 1: Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
Product 1: Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
Product 1: Die adapters work on round and hex shaped Dies.
Product 1: Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket Accessories.
Product 2: Expandable and adjustable to reach areas inaccessible to a fixed head tool for improved access.
Product 2: Head rotates 180° through 14 locking positions for unparalleled access and leverage.
Product 2: Compact design allows for work in tight spaces.
Product 2: Designed for demolition, repositioning equipment, industrial work, aligning steel components, or moving engines.

Check Stock

ARES 42028 - 3-Piece 72-Tooth Flex Head Ratchet Set - Premium Chrome Vanadium Steel Construction & Chrome Plated Finish - 72-Tooth Quick Release Reversible Design with 5 Degree Swing

SPECIFICATIONS: Our 1/4-Inch, 3/8-Inch, and 1/2-Inch Drive Flex Head Ratchets are made of Chrome Vanadium steel with a corrosion resistant Mirror Polish Chrome finish for long lasting durability. These tools feature quick release flexible heads for easy socket changes with 72-tooth ratcheting mechanisms that make them the perfect tools for getting the job done fast. The 1/4-inch ratchet is 7 inches long, the 3/8-inch ratchet is 11 3/8 inches long, and the 1/2-inch ratchet is 12 1/4 inches long..
DESIGN CONSIDERATIONS: The reversible 72-tooth ratcheting mechanism only needs a 5-degree swing arc to operate while maintaining maximum torque. The drive direction can easily be changed with a flick of the thumb switch on the back of the flexible ratchet head, while changing sockets out is easy thanks to the quick release button..
WHY YOU NEED IT: The flexible ratcheting design allows for ease of movement and a full 180 degree range of motion in today's tight and confined engine compartment. Each ratchet meets and exceeds ASME torque performance standards..
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 72-Tooth Flex Head Ratchet....

Check Stock

Husky Stubby Wrench and Socket Set 46-Piece -H46PCSTS

SAE AND METRIC: There are 23 Standard American an 23 Metric bits in here, allowing you to accomplish a variety of tasks.
ORGANIZATION: An included carrying case has molded sections for every piece in this kit that you can store away when not in use. There are also....
EXTENDABLE RATCHET: Pull out the head of the ratchet to increase its length, allowing you to get into hard-to-reach areas with less risk to hurting....
SCREWDRIVER HEAD MEASUREMENTS: Slot Heads in 5/32, 3/16, and 1/4. Hex Bits in 1/8 and 1/4. Star Heads in T10, T15, T20, T25, and T30. Phillips in 1....
SOCKET WRENCH MEASUREMENTS: (SAE: 9/16, 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32) (METRIC: 14mm, 13mm, 12mm, 11mm, 10mm, 9mm, 8mm,....

Check Stock

Crescent 26 Pc 1/4' Drive 6 Point Standard & Deep SAE Mechanics Tool Set - CSWS2C

72-tooth ratchet requires only a 5-degree swing arc to turn a fastener.
Teardrop ratchet head for improved access.
Flush-mounted on/off switch allow better access in tight spaces.
Quick release allows for fast socket exchanges.
Sockets feature off-corner loading technology to virtually eliminate fastener rounding.

Check Stock