ReviewsSocket Welding Pipe Fitting

WELD-ON 10225 P-70 Industrial Grade PVC/CPVC Non-Bodied Primer - Fast Acting and Low-VOC, Purple, 1 Pint (16 fl oz)

  • Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
  • Promotes maximum fusion between pipe and fitting during welding.
  • Strong, aggressive priming action ideal for use in cold weather.
  • Compatible with all classes and schedules of PVC and CPVC and especially recommended for use on Schedule 80 and large-size pipe.
  • Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock

CIRCOPACK Screw Tab Caps for Schedule 40 PVC Pipes Furniture Grade (2 pieces) (1-1/2 inch)

  • Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
  • Some people use them for mounting a small table to the end of PVC pipe..
  • The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
  • The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..
  • This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 1-1/2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

Supply Giant 3942x10 Flexible Pvc Pipe Cap with Stainless Steel Clamps, 2 Inch Black (pack of 10), 2'

  • This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
  • The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
  • Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
  • Some people use them for mounting a small table to the end of PVC pipe..
  • The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..
Check Stock

Weld-On 10211 P-68 PVC/CPVC Non-Bodied Primer - Fast Acting and Low-VOC, Clear, 1 Pint (16 fl oz)

  • Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
  • Promotes maximum fusion between pipe and fitting during welding.
  • Clear color helps prevent staining while priming.
  • Compatible with all classes and schedules of PVC and CPVC.
  • Meets SCAQMD Rule 1168/316A, ASTM F 656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock

RIDGID 40220 461 Straight Pipe Welding Vise, 1/2-inch to 8-inch Pipe Welding Clamp,Red,Small

  • Designed for secure clamping onto straight pipes.
  • pipe welding vise is available in straight, angle, elbow and flange styles.
  • Constructed of durable, performance-proven material for reliable, long-lasting use.
  • Straight welding vise resists strain, heat and warping during tacking.
  • Machined swivel nuts and pins combined with special chain screws allow for smooth, trouble-free vise assembly onto the pipe.
  • Straight pipe welding vise has a 1/2-inch to 8-inch (15 mm to 200 mm) pipe capacity.
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

Pipe Stand V Head Adjustable Height for welding

  • Adjustable Construction: The height of this pipe jack stand is adjustable (from 28"/71 cm to 52"/131 cm) to meet different needs. Durable V-head....
  • Heavy Duty V-head: The pipe stand is constructed of premium steel, rust- and corrosion-proof, durable for a long time. The lock washer ensures....
  • Portable & Compact Design: The whole jack stand is folding. Storage won't take your much space. It also includes casters and meets your needs if you....
  • Great Stability: The foot pads of this V-head pipe stand are widened. The strut tension plate features superior lateral support. Stability is enhanced....
  • Wide Application: Welding of heavy pipes, shapes, solids, and rounds. This welding pipe stand supports pipe during pipe threading, pipe hole....
Check Stock

Thermalright True Spirit 120 REV.B Ultimate CPU Air Cooler, Black Nickle Plated, 5 Heatpipes, Dual TL-C12PRO PWM Fan, for AMD AM4/Intel 115X/1200/2066

  • Radiator size: 120×104×157mm；Fan size: 120×120×25mm, 5×6mm heat pipe, with good compatibility with the most popular computer chassis in the market.
  • 120mm silent fans (S-FDB bearings) for high airflow and static pressure, silent operation (PWM, rpm1850±10%), noise ≤ 29.6dba.
  • Safe and easy to install spring loaded mounting system, compatible with socket Intel: 115x / 1200 / 2066 / 2011；AMD:AM4.
  • 5x6mm heat pipe and copper plate base ensure greater heat dissipation and excellent cooling performance of the mainstream system.
  • Weight: 1.4kg，full electroplating reflow welding process.
Check Stock

Hayward BFA1040SES Series BFA Standard Flange Bulkhead Fitting, Socket x Socket End, PVC with EPDM Seals, 4" Size

  • Bulkhead fitting to connect two tubes or pipes through a panel.
  • Socket ends for connecting to a male pipe or fitting.
  • CPVC for better resistance to high pressures, corrosion, and temperatures than PVC, and an EPDM gasket for resistance to weathering, ozone, UV, electricity, oils, water, steam and some solvents.
  • Withstands temperatures from 40 to 190 degrees F.
Check Stock