ReviewsSocket weld Flange

Remflex 2048 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

Chevy V8 - 4.8L, 5.3L, 5.7L- LS1, LS6/6.0L- LS1, LS2 Vortec, 1-1/2" RP, For Weld Bead Headers, 2/Set.
additional sealing material is provided around the weld bead to provide a better seal.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....

Check Stock

RIDGID 40220 461 Straight Pipe Welding Vise, 1/2-inch to 8-inch Pipe Welding Clamp,Red,Small

Designed for secure clamping onto straight pipes.
pipe welding vise is available in straight, angle, elbow and flange styles.
Constructed of durable, performance-proven material for reliable, long-lasting use.
Straight welding vise resists strain, heat and warping during tacking.
Machined swivel nuts and pins combined with special chain screws allow for smooth, trouble-free vise assembly onto the pipe.
Straight pipe welding vise has a 1/2-inch to 8-inch (15 mm to 200 mm) pipe capacity.

Check Stock

TFCFL Turntable Table, DC24V 20W Rotary Welding Positioner Turntable Table High Positioning Accuracy Suitable for Cutting, Grinding, Assembly, Testing and Other Seam Welding (10KG)

...le rotation, easy to control rotation.
Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
Anti-electromagnetic design, efficiently reduce high frequency interference on TIG welding..
√ 【Rotary Welding Positioner Turntable Table Application】Especially suitable for under 10KG flange, steel pipe and other seam welding. Used for annular welding, cutting, polishing, assembling etc. Support CO2 welding, MIG, MAG, TIG welding etc. Also for cutting, grinding, assembly, testing and other processes..

Check Stock

304 Stainless Steel Bench Pedestal - 16.25\ High

ROBINSON STEEL COMPANY IS PROUD TO BE THE MANUFACTURER OF THE ONLY FLANGED STYLE 304 GRADE STAINLESS STEEL PEDESTAL MADE IN THE USA.
8.25" diameter x 11 gauge flange plates top and bottom.
Heavy Duty Steel Tube: 2" diameter x .12" wall (11 gauge).
Steel Tube is welded to top and bottom plate with a full 2" diameter weld 1/8" fillet.
Universal pedestal with three holes in top/bottom plate for bench and floor mounting, Stainless steel hardware is provided for mounting to bench tops, Floor anchor bolts are NOT provided..

Check Stock

Custom Threaded Exhaust Adaptor Flange Kit Diy Generator Fits HONDA GX390

Heavy duty threaded exhaust flange kit for use on Honda GX390 engines. This is an un welded DIY kit so you can choose the length of the threaded pipe to work best for your application. Great for custom exhaust setups on generators, go karts, mini bikes, or garden equipment. Flange is CNC cut from heavy 1/4" steel plate to prevent warping, outlet pipe is 1" NPT pipe thread that matches exhaust port perfectly for maximum flow. Length of outlet pipe piece is 2.5"..
Comes complete with stainless steel mounting hardware for a quality installation..

Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

1-1/4 inch width x 1-5/8 inch height Oval Port.
Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
additional sealing material is provided around the weld bead to provide a better seal.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Check Stock

DNA Motoring FXP-FESC01 Flex Pipe Connector [For 03-08 Ford Escape 3.0L V6]

Made of high quality T-304 stainless steel with flex.
TIG welded CNC machine flange for resistance against pressure and corrosion.
Slips over factory exhaust pipe to be clamped or welded to repair broken flex section.
2"diameter 2-bolt inlet to 2. 125" factory sized pipe outlet.

Check Stock

Fujikura New Model FSM-38S V-groove Alignment Welding Fusion Splicer with CT-50 Cleaver and other accessories.

...amping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
【Feature】1.Speed regulation. 2.Structure of precision, easy to operate, flexible to use. 3.Especially suitable for under 10KG flange, steel pipe and other seam welding. 4.High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision.
【High Positioning Accuracy】Light weight, easy to use, handling, easy to operate.
Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
Using foot switch control table rotation, easy to control rotation.
【Shipment】We ship directly from the US warehouse.Feel free to contact us if you have any questions.We will provide the best suitable solutions for you.We are committed to provide best service for every customer!.

Check Stock

Milwaukee 48-32-5033 Power Drill Bit Extensions Shockwave Socket Adapter Set, 1/4\

... get to,360 degree adjustable thumb flange.It can connect hand drill and manual wrench.The function head is equipped with a locking and magnetic device, to ensure that the sleeve does not fall.Built-in strong magnet for good holding power, accepts all 1/4" standard hexagon shank bits.Apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces..
☆☆ 3Pcs Colorful Socket adapter impact set - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket adapter set .Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
☆☆ 1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
☆☆ 1 Pack include 3 different most useful tools,used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool ..

Check Stock

2 Inch Exhaust Flange Universal Flat Oval Split Repair Exhaust Flange Replacement Accessory

Fitment: Universal for most of motocycle. Please compare your parts with the pictures before purchasing an item..
Applied High Quality Material: Exhaust flange made with steel which ensures that it has not easy to crack, anti-acid and alkali, light, wear resistant....
Easy to Install: Just attach it to your flared pipe and connect the bolt to the existing flange that needs to be connected..
Note: It do not require welding or cutting of your exhaust pipe to apply..
Service Guarantee: Excellent quality Service, fast delivery, simple after-sales.We promise satisfaction guarantee as we can.If you have any....

Check Stock