ReviewsSoft Down Lid Support

Soft Close Lid Support 200N Gas Struts Heavy Duty Hinges Automatic Slow Lowering Gas Springs Hinges for Toy Box Storage Box,30 lb per strut ,2 Packs

►Practical Safe Lid Stay: This hinge use a safety Soft Close design, which will protect your and your kids finger and avoid the noise and startle....
►Material, ZINC ALLOY: The 200N lid support hinges are made of high quality material--Zinc alloy, it is stable, will last for years..
►200N Heavy-Duty, 75-90 degree OPEN ANGLE: Minimum weight support--15lb (per strut), max weight support--30lb(2pcs). The 200N heavy duty gas struts....
►Applications: This soft close lid support hinge can be use for toy box lid support, storage box lid support, cabinet lid support, plywood box lid....
►Easy To Use: Easy to install, comes with 2 pack, screws included in package for installation. And about the adjust the soft close, please tighten....

Check Stock

MIAO JIN Lid Stay Lid Support 105 Degree Open with Soft Close Cabinet Hinges for Toy Box and Upward Top-Opening Flap Doors Easy Close Hinges

Material: The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19....
Lid stay slow closing：Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
Keep lid hinge stay opening：Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to....
The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree. Each hinge....
Package include: Each package has 1 Pack ..

Check Stock

2 Pcs Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty Adjustable Metal Lift and up Hinges Cabinet Door Support Hinge

【Material】Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 40 lbs when use 2 pcs（up to 20lbs - 1 Lid Stay）.
【DURABLE LID SUPPORT HINGE】each lid stay can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75°,90°,110°,self adjust, easy to use..
【Adjustable for different weights】With wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers. (in most cases，turn right to increase load capacity).
【Multipurpose Lid Support Hinge】These elegant form of support hinges are well made and designed to support the lids of small box, such as toy box,cabinet,closet,wardrobe lids,The arm with graceful body curve adds classic luxury to your furniture..
【Package】2 pcs lid stays,allen wrench and screw are included.

Check Stock

Ravaver Toy Box Hinges Soft Close, 26LBS-34LBS Heavy Duty Lid Stays 90 Degrees Open with Easy-to-Install Card, Sold in Pairs (Black)

GENTLE CLOSING: All-New hydraulic slow-down mechanism for improved stability and safety. The lid stay will close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers.
STRONG SUPPORT: For lid height of over 18in, handle lid weight from 13lbs to 17lbs per hinge, while 2 hinges double weight support from 26lbs to 34lbs. For lid height of over 25in, each hinge supports 7-9lbs and both hinges do 14-18lbs.
LOCK LID OPEN SECURELY: Hold your lid open at max 90 degrees until you are ready to push it shut. Never worry about having to prop the lid open.
ONLY TAKES 5 MINUTES TO GET INSTALLED by following the placement measurement card. Note: one hinge for left-hand mounting, and the other one for right-hand mounting.
BEFORE PURCHASING: Do not support the lid at width over 45in and height over 28in. Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk.

Check Stock

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 2)

LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..

Check Stock

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 1)

LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..

Check Stock

RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

DURABLE LID SUPPORT HINGE--Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support or bar counter function..
SOFT CLOSE LID STAY---Every Lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.
MAX WEIGHT LID HINGE--Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side..
WIDE APPLICATION--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe..
EASY TO INSTALL LID SUPPORT --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package..

Check Stock

Bench Seat Hinge for Toy Chest Heavy Duty No Slam Safety Torsion Hinge Lid Support Stay Hinge

2 in 1 HINGE AND LID STAY/SUPPORT HINGE in 1 piece. No metal visible on outside of your toy chest or bench.See installation images..
HIGH RAISING: This metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over- center 95-degree angle to prevent lid from falling unexpectedly..
HEAVY DUTY: Maximum lid weight of this hinge is 30 lbs to keep your lid from slamming, so this heavy duty lid support is ideal for industrial use like storage containers and trunks..
SAFE AND SECURE: This soft close hinge is specially designed to prevent pinched fingers, so it will never slam shut to your child. This specially manufactured lid support won't let the lid fall..
BUILT-IN FEATURE: This metal no slam lid support features a built-in stopping mechanism which prevents seat top from slamming on fingers. This built-in stopper makes this lid support more secure and ensures that lid is stable after opening..

Check Stock

Heavy Duty Hinge with Soft Close 50lb/2pcs Folding Lid Stay Hinge for Cabinet, Kitchen Wardrobe Toy Chamber

WIDE USAGE LID SUPPORT HINGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required , Upward door open adjustable angle of 75°,90°,110° by yourself..
KEEP THE LID OPEN — The lid hinge will hold the lid open until you want to close. Never worry about having to support the lid anymore. Heavy toy chest lid to prevent fingers from getting smashed..
DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
WEIGHT CAPACITY—Max weight support 50lbs/2 pcs, Lid support hinge can be mounted on the left or right side..
EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. You will get 2pcs lid stays, Allen wrench and exclusive redesign Installation instruction in package..

Check Stock

Toy Box Hinges Soft Close,APFFSY Lid Support Hinges,Lid Stay for Chest Wardrobe Closet Cupboard Wooden Box Max Weight Support 50lb/2pcs

【DURABLE MATERIAL】 Max weight support 50lbs/2pcs.This up-grated version has the advantages of strong bearing capacity,metal connector instead of....
【EASY TO INSTALL】 Our soft close hinges can be mounted on the left or right side,also used for side-mounting and top-mounting.Upward door open....
【KEEP LID OPEN】The lid support hinge will hold the lid open until you want to close.Never worry about having to support lid by hand anymore.It's....
【ADJUSTABLE TENSION】Adjust tension with Allen wrench to fit for lids with different weight.After installing the folding lid stay hinge,please....
【CONDITIONED SOFT CLOSING】Only with this chest hinges supporting less than 50lbs and keeping two soft close lid supports in same tension by your....

Check Stock

Bench Seat Hinge for Toy Chest- Lid Support Stay Hinge- Heavy Duty No Slam Safety Torsion Hinge.

2 for 1 PRICE! HINGE AND LID SUPPORT. No metal visible outside toy chest. See installation omages..
HEAVY DUTY: Maximum lid weight of this hinge is 30 lbs to keep your lid from slamming, so this heavy duty lid support is ideal for industrial use like....
HIGH RAISING: This metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over-....
EASY INSTALLATION: If you are looking for a soft close, no slam lid support then Pinnacle Woodcraft's metal bench seat hinge is highly recommended and....
BUILT-IN FEATURE: This metal no slam lid support features a built-in stopping mechanism which prevents seat top from slamming or sudden motion....

Check Stock