ReviewsSoft Down Stay Hinge

Douper 100N/22lb Gas Spring Hinge Slow Down Drop Leaf of Cabinets Desks Slowly Open Drop Leaf Pack of 2

  • SPECIALLY DESIGNED FOR DROP LEAF--The hinge will work perfectly if your drop leaf weighs less than 22lbs. It is not used for supporting lid or keeping it stay..
  • STURDY GAS SPRING—Pressure: 100N/22lb. Suitable for: 16-22lb drop leaf. Made of solid brass and iron, sturdy gas spring helps to lower the lid softly and close it easily. With Chrome plated, it is durable and corrosion-resistant..
  • SOFT DROP-DOWN—It is designed to damper the drop-down rate of a drop leaf, such as that of cupboard, cabinet and shoebox, and prevent quick and dangerous closure..
  • EXTEND AUTOMATICALLY-- Overall length: 7.9in (compressed) to 11.4in (stretched). Travel-3.5in. The space-saving hinge will extend automatically as you pull the lid open, and will not get in the way..
  • EASY TO INSTALL by following the instructions.
Check Stock

Toy Box Hinges Soft Close - Lid Support Hinges (Pack of 2), Safety Soft Close Hinges for Chest Toy Box, Slow Close Hinges,Lid Support Soft Close 105 Degree Open (APFFSY)

  • GENTLE SLOW CLOSE HINGES — It's heavy lid hinge and soft close lid support. Expecially excellent slow close and safety solution on chest hinges, toy box hinges. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of children!.
  • KEEP LID STAY OPEN — The lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It's widely usage as slow close hinges for toy box hinges, chest hinges, also fit for overhead kitchen cupboard, wardrobe lids too！.
  • SMALL COMPACT DESIGN — The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle. Perfect for any lids or flaps when lid support soft close is required..
  • EASY TO INSTALL — The safety hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. Keep the soft close hinges installed for 75°-105° adjustable opening angles, depending on actual situation. It can fit for most lids.
  • REFUND GUARANTEE — If you are not satisfied w....
Check Stock

Heavy Duty Lid Support Hinges Soft Close Folding Lid Stay Hinge, Keep Lid Hinge Open, Perfect for Cabinet, Kitchen, Wardrobe Toy Chamber Max Support 50lb/2pcs

  • LID SUPPORT HINGE USAGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required..
  • KEEP THE LID OPEN— The lid hinge will hold the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • WEIGHT CAPACITY 50LB—Lid stay max weight support 50lbs/2pcs, Lid support hinge can be mounted on the left or right side. , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. Allen wrench and exclusive redesign Installation instruction in package..
Check Stock

Toy Box Hinge Soft Close, Lid Stay 105 Degree Open Safety Slow Close Hinges Support Toy Chest for Upward & Top-Opening Flap Doors Pack of 2

  • SLOW & SOFT CLOSE HINGE¡ªLid stay will make door and lid will close slowly and softly to reduce the impact. Which can prevent noise or smashing fingers. Lid stay torsion hinge support toy box lid and kitchen cabinets..
  • DURABLILITY LIDS¡ªMade of high quality alloy and plastic, with strong corrosion resistance and durability. Long lasting and durable..
  • COMPACT U-SHAPE SNAP DESIGN¡ª Hinge allows the lid to open at an max angle of 105 degrees. Special u-shape design is to prevent the case or door from sliding off when opened. Lid let your baby safety and reliable..
  • EASY INSTALLATION¡ªLid support hinge Can be assembled left and right, support weight capacity is 12-22 lbs. Only follow up instruction of soft close hinge, you will make lid work well..
  • WORRY-FREE WARRANTY¡ªWe offer worry-free warranty and friendly customer service within 12 months for your confident purchase. If you are not satisfied with any product, please don¡¯t hesitate to contact us, we will serve you until your satisfaction..
Check Stock

Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty,Soft Close Hinges for Chest Toy Box,Lid Stay Support 50lb/2pcs (APFFSY)

  • KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required..
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance..
  • EASY TO INSTALL【 Important：Refer to our install videos ! 】 — The lid closer can be mounted on the left or right side, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75°,90°,110°. It can fit for most lids and allow you to keep your lids stay at any angle. Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package！.
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight. After installing the....
Check Stock

RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

  • DURABLE LID SUPPORT HINGE--Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support or bar counter function..
  • SOFT CLOSE LID STAY---Every Lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.
  • MAX WEIGHT LID HINGE--Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side..
  • WIDE APPLICATION--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe..
  • EASY TO INSTALL LID SUPPORT --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package..
Check Stock

Heavy Duty Hinge with Soft Close 50lb/2pcs Folding Lid Stay Hinge for Cabinet, Kitchen Wardrobe Toy Chamber

  • WIDE USAGE LID SUPPORT HINGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required , Upward door open adjustable angle of 75°,90°,110° by yourself..
  • KEEP THE LID OPEN — The lid hinge will hold the lid open until you want to close. Never worry about having to support the lid anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • DURABLE MATERIAL — The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • WEIGHT CAPACITY—Max weight support 50lbs/2 pcs, Lid support hinge can be mounted on the left or right side..
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. You will get 2pcs lid stays, Allen wrench and exclusive redesign Installation instruction in package..
Check Stock

2 Pcs Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty Adjustable Metal Lift and up Hinges Cabinet Door Support Hinge

  • 【Material】Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 40 lbs when use 2 pcs（up to 20lbs - 1 Lid Stay）.
  • 【DURABLE LID SUPPORT HINGE】each lid stay can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75°,90°,110°,self adjust, easy to use..
  • 【Adjustable for different weights】With wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers. (in most cases，turn right to increase load capacity).
  • 【Multipurpose Lid Support Hinge】These elegant form of support hinges are well made and designed to support the lids of small box, such as toy box,cabinet,closet,wardrobe lids,The arm with graceful body curve adds classic luxury to your furniture..
  • 【Package】2 pcs lid stays,allen wrench and screw are included.
Check Stock

Lid Support Hinge Heavy Duty Soft Close 44lb Gas Spring with Soft Close Support Heavy Drop Lids for Soft Close Pack of 2

  • STURDY LID HINGE WITH SOFT CLOSE—The lid support hinge heavy duty is made of cold-rolled steel in Satin Nickel, and sturdy load-bearing material....
  • MAX SUPPORT 60lb---Gas strut fit most of the lids of box which weight of your lid: 30lb-60lb and with a 9 inch clearance.
  • GENTLY CLOSING HEAVY DUTY LID--Pressure: 200N/30lb (per Strut), Max Weight Support--60lb/2pcs. Based on steel cylinder construction, The hinge is easy....
  • SAFETY LID HINGE WIDELY USAGE---Lid stay designed to support lids of box, such as toy box, heavy bench lid, blanket chest, The hinge will slowly drop....
  • EASY TO INSTALL—Only install the screws and one screwdriver, it will take only 3 minutes. Comes with 2 pack, screws included in package for....
Check Stock

Bench Seat Hinge for Toy Chest Heavy Duty No Slam Safety Torsion Hinge Lid Support Stay Hinge

  • 2 in 1 HINGE AND LID STAY/SUPPORT HINGE in 1 piece. No metal visible on outside of your toy chest or bench.See installation images..
  • HIGH RAISING: This metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over- center 95-degree angle to prevent lid from falling unexpectedly..
  • HEAVY DUTY: Maximum lid weight of this hinge is 30 lbs to keep your lid from slamming, so this heavy duty lid support is ideal for industrial use like storage containers and trunks..
  • SAFE AND SECURE: This soft close hinge is specially designed to prevent pinched fingers, so it will never slam shut to your child. This specially manufactured lid support won't let the lid fall..
  • BUILT-IN FEATURE: This metal no slam lid support features a built-in stopping mechanism which prevents seat top from slamming on fingers. This built-in stopper makes this lid support more secure and ensures that lid is stable after opening..
Check Stock

Prothane 4-1301 Red Rear Bump Stop Kit

  • Soft closing will work perfectly if you make sure your lid is not too large, and adjust and keep two hinges in same tension when installing the hinges..
  • By doing this, It will lower slowly, and protect your fingers from being smashed..
  • You can lift the lid by yourself and hold it up while storing shoes, linens or other daily products. Easy to open and close..
  • Lid stay hiunges designed for keeping the lid stay at different opening angles, providing conditioned soft closing..
  • The small and compact hinge is highly functional and practical..
Check Stock