ReviewsSolar Charge Controller Mppt 40a

HQST 60 Amp 48V MPPT Solar Charge Controller with Built-in Bluetooth and Li Battery Low Temperature Protection Function, Support Two Units in Parallel + 6.6ft RS485 Parallel Charge Connection Cable

【Double the Charging Current】- Get maximum value from your existing solar array systems with different power voltages. Connect two 48V 60A MPPT solar charge controllers to two solar panel systems respectively. Then use the RS485 parallel charge cable to wire two MPPT bluetooth controllers together to double the output current for charging your battery bank system..
【Built-in Bluetooth for Remote Monitoring】- HQST MPPT lithium charge controller keeps real-time and remote tracking of the battery charging status via a dedicated phone app. It provides 300 days of historical data for review. The LCD screen and LED fault indicators allow you to check operating data and status as well as quickly determine system faults and modify controller parameters..
【Powerful Full-Load Capacity】- The filling gel inside provides better PCBA cooling conduction and prevents water, dust, and other damage, extending the service life of the controller. HQST 48V 60A charge controller can work under full load even in a high-temperature environment..
【Low Temp Protection for LiFePO4 Batteries】- Improved BMS provides low-temp protection for lithium batteries. HQST RV solar controller will automatically cut off the charging current to protect the battery’s lifespan.....

Check Stock

HQST 570W 12V/24V High-Efficiency RV Solar Panel Kit with 40 Amp MPPT Charge Controller, Adaptor Kit, Tray Cables, Mounting Z Brackets for Camper Vans, RVs, Cabins, Boats, Rooftops

...o visible defects, and all electrical data in spec, HQST’s solar panels outperform other conventional cells with visible defects, such as chipped cells, corner breakage, and color deviation. Each solar cell passes the strict EL test without any risks that might compromise cell efficiency..
【Efficient MPPT Charge Controller with Built-in Bluetooth】Over 98% conversion efficiency and up to 99% tracking efficiency. The charge controller adopts a die-cast aluminum heat sink and premium IC and PCBA, maximizing the heat dissipation and minimizing the power loss from overheating. It can work under full load even in high-temperature conditions. With the built-in Bluetooth, enjoy the convenience of monitoring the operating data and modifying the parameters in real time..
【Built to Last】HQST’s solar panels are engineered with corrosion-resistant aluminum frames and multiple-layer sheets that can ensure decades of outdoor durability. The IP65-rated junction box and solar connectors allow no worries about water splashes and rain. Tray cables and adaptor cables are all UV-resistant..
【All Wiring Accessories, Ready for Installation】This solar kit comes with all the wiring accessories you need to build an off-grid system, including 3 × 190-watt solar p....

Check Stock

Victron Energy SmartSolar MPPT 100V 50 amp 12/24-Volt Solar Charge Controller (Bluetooth)

SmartSolar MPPT 100-Volt 50 amp: A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.

Check Stock

EpRec MPPT 40A 12V/24V Auto Focus Tracking Solar Panel Charge Controller Regulator with Dual USB Port,LCD Display, New Mppt Technical

【High Quality Solar Charge Controller】 Our Solar Controller Mppt technology is to detect the maximum charging current,not the boost type or the automatic charging of the solar panel voltage. Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%..
【Multi-function LCD Displays】This controller is 12V/24V automatically adapt,first connect the battery,then connect the solar panels,when you first use it, make sure the battery has enough voltage,so that the controller can recognize the correct battery type..
【Industrial-grade Master Chip】16AD sampling accuracy, temperature Charging current, discharge current accurate real-time display, power generation at a glance..
【Professional After-sale Service】We have the most professional technicians to answer your questions at any time, you don't have to worry about encountering problems that you can't solve, we are always at your service..
【NOTE】This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving. Notcie: not true MPPT ,there is no large transformer coil inside.

Check Stock

100W 12V Solar Panel Kits, 100 Watt 12 Volt Monocrystalline Solar Panels 9BB with Intelligent MPPT Charge Controller + Extension Cables for 12 Volt RV Trailer Marine Boat Home Off Grid System

...More busbar, More power. 9BB solar cell can increase the cell receiving surface and the thinner ribbon can reduce the covered area , allowing the 100w solar battery charger a highest conversion rate up to 21.9% than traditional 5BB solar cell, making the 100 watt solar panels to work more efficiently..
[ MPPT Charge Controller ] The included intellgent mppt charge controller enables the 100 watt solar panels to charge multiple 12 volt batteries, like AGM, Gel, Flooded, Sealed, Lead-acid and Lithium battery. Advanced MPPT tech allows it to captures as high as 15%-30% performance than PMW charge controller. And it is powered directly by sunlight, so it has no self consumption and won't drain your battery. Visual LCD display helps to monitor the working conditions of the solar panel and battery..
[ Full Protections ] The 10amp mppt solar controller is built in full protections to safeguard your battery from over-charge, over-discharge, over-current, over-volatge, over-load, short circuit and more, to maximually avoids the damage due to system fault or installation error. Featuring with smart 3 stage charging to ensure your battery is efficiently and safely charged to 100%..
[ Suitable for Multiple Scenarios ] The 100 watt solar panel kit works great for of....

Check Stock

Victron Energy SmartSolar MPPT 150V 35 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

SmartSolar MPPT 150-Volt 35 amp, Battery Voltage: 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.

Check Stock

Victron Energy SmartSolar MPPT Tr 250V 100 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

SmartSolar MPPT Tr 250-Volt 100 amp, Battery Voltage: 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.

Check Stock

Intelligent 10A MPPT Solar Charge Controller, 10 Amp 12 Volt Solar Panel Regulator with Digital LCD Display + Temp Sensor + Polarity Adapter for 12 Volt Wet Gel AGM Lithium LiFePO4 Battery

[ MPPT Charge Controller + Polarity Adapter ] A polarity adapter is required in case that your solar panels are not compatible with our MPPT charge controller. If the solar panel was compatible, please purchase “ 10A MPPT ” ASIN : B09F697FBV.
If NOT compatible, please purchase “ 10A MPPT + Polarity adapter” ASIN: B09W5YCRR7..
[ Compact & Portable ] Improved over the PMW charge controller, Allto Solar MPPT (Maximum Power Point Tracking) charge controller bringing a new generation to maximizing use solar power to charge your system, it is 25% smaller in size but captures as high as 15%-30% performance to charge the battery with no additional self power consumption. High tracking efficiency of up to 95% while PMW charge controller is 65%-80%. Automatically detect 12V DC system voltage..
[ Multi-protection to Ensure Safety ] Built in over temperature protection, over voltage protection, over current protection, over charging protection, over discharging protection, over load protection, short circuit protection to provide full protection for your battery, to maximally avoids the damage due to system fault or installation error..
[ Works with Multiple Batteries ] Compatible with AGM, Gel, Deep Cycle Sealed, Gel, Flooded and LiFePO4 Lithium Battery. ....

Check Stock

Victron Energy SmartSolar MPPT TR VE.Can 250V 100 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

SmartSolar MPPT Tr VE Can 250-Volt 100 amp, Battery Voltage: 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from solar panels, and stores it in batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.

Check Stock

EpRec MPPT 100A 12V/24V Auto Focus Tracking Solar Panel Charge Controller Regulator with Dual USB Port,LCD Display, New Mppt Technical

【High Quality Solar Charge Controller】 Our Solar Controller Mppt technology is to detect the maximum charging current,not the boost type or the automatic charging of the solar panel voltage. Compared with normal solar charge controller, this controller could increase efficiency by 10%-30%..
【Multi-function LCD Displays】This controller is 12V/24V automatically adapt,first connect the battery,then connect the solar panels,when you first use it, make sure the battery has enough voltage,so that the controller can recognize the correct battery type..
【Industrial-grade Master Chip】16AD sampling accuracy, temperature Charging current, discharge current accurate real-time display, power generation at a glance..
【Professional After-sale Service】We have the most professional technicians to answer your questions at any time, you don't have to worry about encountering problems that you can't solve, we are always at your service..
【NOTE】This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving. Notcie: not true MPPT ,there is no large transformer coil inside.

Check Stock

Vehpro MPPT 40A-100A 12V/24V Auto Focus Tracking Solar Panel Regulator Dual USB Port Charge Controller 100A

✔️ --- NOTE: The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL. It is NOT suited for nickel metal hydride, lithium ions or....
✔️ --- MPPT solar charge controller MPPT10-60: Compared with normal solar charge controller, this MPPT controller could increase efficiency by....
✔️ --- When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to....
✔️ --- This MPPT controller has perfect SOC function, control charge current, and supply power to the loads.Prevent the battery from over-charging....
✔️ --- Any problem please contact with us , we will try our best to solve your problem and make you satisfied within 24 hours..

Check Stock