ReviewsSoldering Kit With Solder Wire And Flux

SONEAK 60/40 Tin Lead Solder With Rosin Core For Electrical Soldering 1.0mm 50g

  • ★ Tin Lead Solder Wire: High quality Rosin Core Solder Wire.
  • ★ Sn60-Pb40 Solder: Sn 60%- Pb 40%, Flux 2.0%.
  • ★ Lower Melting Point: 361F/183C, easy to be soldered, flows smoothly, soldering fast and strong shiny soldering point.
  • ★ Special Features: This SONEAK 1.0mm solder wire offers lower temperature melting, pretty good flow,clean, less smoke, reliable and nice soldering joint.
  • ★ Applications: Very good soldering capability for electrical soldering, esp DIY project, Home improvement, Maintenance of sterro, toys, TV circuit boards etc. repairing.(Warning: This product can expose you to lead which is know to the State of Califormia to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings website).
Check Stock

10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance

  • Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
  • Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
  • Please check the size carefully before purchasing.
  • Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
  • And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
  • Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
  • Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
  • Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock

MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering 0.8mm 50g

  • √ Tin Lead Solder Wire: High Quality Rosin Core Solder Wire.
  • √ Parameters: solder wire Tin 63%- Lead 37% (Sn63-Pb37).
  • √ Flux content 1.8%，electrical soldering wire dia is 0.8mm (0.0315inch)，gross weight 50gram (0.11lbs),good size for pocket.
  • √ Low Melting Point: 361F/183C. easy to be soldered, flows smoothly, soldering fast and strong soldering point..
  • √ Applications: Very good soldering capability, esp for circuit board, DIY, home improvement, Repairation of cable/TV/Radio/sterro/ Toys and other electrical devices etc. (WARNING: This product can expose you to lead, which is known to the State of California to cause brith defects or other reproductive harm. For more information go to the offical Proposition 65 Warnings Website).
Check Stock

TOWOT 63-37 High Purity Tin Lead Rosin Core Solder Wire for Electrical Soldering Content 1.8% Solder flux 0.8mm 50g

  • [Alloy Parameters] -- Solder wire Tin 63% Lead 37% (Sn63 Pb37)；Solder flux Content:1.8%.
  • [Parameters of Solder Wire] -- Diameter: 0.8mm /Weight: 50 g.
  • [Perfect soldering capability] -- This wire has a low melting point, flows smoothly, has fast soldering speed, and has strong solder joints..
  • [Applications] -- The features of solder wire can help people solder easier. Especially suitable for circuit board, TV, radio, and other home....
  • [After-sales Guarantee] -- In order to bring you a better shopping experience, if you have any questions, please feel free to contact us. We will....
Check Stock

110W Electronics Soldering Iron Kit - LCD Digital Soldering Iron Adjustable Temperature Wire & Cutter Stand Soldering Iron Tip Set Desoldering Pump Solder Tweezers Soldering Flux Paste

  • ·110w High Power ·ON/OFF Switch ·Automatic Sleep ·LCD Digital Display.
  • 【NEW DESIGN】It is designed with adjustable temperature and thermostatic, ON/OFF switch, LCD display ,Conversion between Celsius( 90-480℃) and....
  • 【110W HEAT UP FAST】The soldering iron use an inner-heated ceramic core with 110w, which heat up to operating temperatures in 20 seconds. Four....
  • 【WIDELY USED】Our soldering iron kits can be used for solder electronic circuit boards, computer phone repairs, home DIY, pyrography, carving....
  • 【PROFESSIONAL KITS】Our soldering iron kit include a 65W soldering iron, flux pen, wire & cutter, stand, 5 soldering iron tips, solder, tweezers,....
Check Stock

COLIBROX New 5pc 100w Soldering Gun Kit W/case Iron Solder Professional Style Sodering

  • SINGLE HAND OPERATION: Have you ever think about one hand doing solder feeding and soldering, and one hand hold the wire? Order our automatic soldering gun, accomplish soldering with ease. The solder wire spool designed on the body can provide the solder feeding while soldering, just pull the trigger, the solder wire will trace down the stainless steel wire pipe to where you are soldering. The soldering iron kit includes 1mm 1.76oz solder wire roll, you can start soldering once receive it..
  • HEAT UP FAST & HOT ENOUGH: The solder gun equipped a high quality ceramic core with 60w, temperature ranges from 392℉ to 896℉ (200-480 ℃), which meets your soldering need from basic home use to delicate tasks involving computer equipment, especially for beginner and hobbyist. Support tin wire diameter from 0.8mm to 1.2mm..
  • BUY 1 GET 6 - Our Soldering gun comes with Power switch and Autofeed bracket X1, Upgraded desoldering pump X1, Anti static tweezers X2, Extra iron tips X5, Soldering wire X1, totally full and perfect precision soldering kit..
  • BUILT TO LAST: Come with 5 interchangeable iron tips that have excellent heat-resistant, avoiding melt problem after a long soldering session. In addition, the stainless steel iron can withstand at least 5,000 times....
Check Stock

TOWOT Tin Lead Rosin Core Solder Wire for Electrical Soldering Content 1.8% Solder Flux Sn60-Pd40 1.0mm 50g

  • [Alloy Parameters] -- Solder wire Tin 60%- Lead 40% (Sn60-Pb40)；Solder flux Content:1.8%.
  • [Parameters of Solder Wire] -- Diameter: 1.0mm /Weight: 50 g.
  • [Perfect soldering capability] -- This wire has a low melting point, flow smoothly, fast soldering speed and strong solder joints..
  • [Applications] -- The features of solder wire can help people solder more easier. Especially suitable for circuit board, TV, radio and other home appliances repair, DIY, home decoration..
  • [After-sales guarantee] -- In order to bring you a better shopping experience, if you have any questions, please feel free to contact us. We will reply as soon as possible. Thank you!.
Check Stock

TOWOT Tin Lead Rosin Core Solder Wire for Electrical Soldering, Content 1.8% Solder flux Sn60-Pd40 (0.8mm, 50g)

  • [Alloy Parameters] -- Solder wire Tin 60%- Lead 40% (Sn60-Pb40)；Solder flux Content:1.8%.
  • [Parameters of Solder Wire] -- Diameter: 0.8mm /Weight: 50 g.
  • [Perfect soldering capability] -- This wire has a low melting point, flow smoothly, fast soldering speed and strong solder joints..
  • [Applications] -- The features of solder wire can help people solder more easier. Especially suitable for circuit board, TV, radio and other home appliances repair, DIY, home decoration..
  • [After-sales guarantee] -- In order to bring you a better shopping experience, if you have any questions, please feel free to contact us. We will reply as soon as possible. Thank you!.
Check Stock

No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)

  • Package includes: you will receive 3 pieces of no clean solder flux pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement.
  • Suitable size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
  • Please check the size carefully before purchasing.
  • Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
  • The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
  • Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
  • The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
  • Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and ....
Check Stock

TOWOT 63-37 High Purity Tin Lead Rosin Core Solder Wire for Electrical Soldering, Content 1.8% Solder flux (1.0mm, 50g)

  • [Alloy Parameters] -- Solder wire Tin 63% Lead 37% (Sn63 Pb37)；Solder flux Content:1.8%.
  • [Parameters of Solder Wire] -- Diameter: 1.0mm /Weight: 50 g.
  • [Perfect soldering capability] -- This wire has a low melting point, flows smoothly, has fast soldering speed, and has strong solder joints..
  • [Applications] -- The features of solder wire can help people solder easier. Especially suitable for circuit board, TV, radio, and other home appliances repair, DIY, home decoration..
  • [After-sales Guarantee] -- In order to bring you a better shopping experience, if you have any questions, please feel free to contact us. We will reply as soon as possible. Thank you!.
Check Stock

Simple Soldering: A Beginner's Guide to Jewelry Making

  • 【Professional Function Design】This 60w 110v pencil-type soldering iron features adjustable temperatures(392 ℉-842 ℉/200-450 ℃) and thermostatic setting. In addition, our soldering iron with ON/OFF Switch, which is easy to save energy and ensure safe welding..
  • 【Heats Up Quickly & Heat Dissipation Efficiently 】Our soldering iron adopts the advanced ceramic heating core to heat up to reach the desired temperature within 15 secs. Four ventilation holes on the solder iron, reducing the temperature conducted from the tip to the handle..
  • 【Must-Have Soldering Iron Kit】Kit Includes soldering iron, simple stand, conventional sponge, 5pcs interchangeable iron tips, 50g fine 0.6mm tin lead rosin core 60/40 tin-lead solder, 50g no-clean solder rosin flux paste. It has all the materials you need to get started..
  • 【Wide Application】Widely used for welding circuit board, appliance repair, jewelry and metal headdress making, computer, and DIY. Perfect for beginners, welders, basic household equipment, welding engineer training, etc. Excellent Gifts for Fathers Day!.
  • 【Portable kit & Quality service 】Compared with soldering iron station, our soldering gun kit is portable to carry, just plug then use. Also, all MINGQ products are backed 2-year warra....
Check Stock