ReviewsSolderless Breadboard

DaFuRui 170 Point Mini Breadboard Kit，12Pack Small Tiny Breadboard with Adhesive on The Back for Arduino [6 Colors]

Size: 1.8 x 1.3 x 0.3Inch/46 x 34 x 8mm(L*W*H).
Package Include: 10pcs x 170 Tie-points Mini Breadboard.
Self Adhesive Tape: With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield..
Solderless breadboard is convenient for the prototypes and circuit design experiment and other DIY projects..
Risk Free Shopping - Yohii hope to provide you a satisfied and happy shopping.Full refund is guaranteed if the item has any quality issue after....

Check Stock

Breadboard Wires Jumper Wires Dupont Cable 120pcs Multicolored 20cm 40 pin Male to Female,Male to Male,Female to Female Breadboard Jumper Wires Ribbon Cables Kit

Jumper Wires Kit,Michael Josh Electrical Solderless Breadboard Ribbon Cables.
The Jumper Cable can be separated according to the demand.
Compatible with 2.54mm spacing pin headers,and to support non-standard odd-spaced headers.
Great for Arduino breadboard kit projects,Portable design, easy and safe to use.
In the terminals have not damaged it can be reused, if damaged can also be used for soldering.

Check Stock

WayinTop RPi GPIO Breakout Expansion Kit for Raspberry Pi 4B 3B+ 3B 2B B+, T-Type GPIO Expansion Adapter Board + 830 Tie Points Solderless Breadboard + 40pin GPIO Flat Ribbon Cable + 65pcs Jumper Wire

【Updated Starter Kit for Raspberry Pi】This is a updated Assembled starter kit for for Raspberry Pi 4B/3B+/3B/2B/B+, including GPIO Adapter Board with Wiring Diagram Card, 40pin GPIO Rainbow Fat Cable, 830 Tie Points Solderless Breadboard and 65pcs Jumper Wire..
【GPIO Adapter Board with Wiring Diagram Card】You can connect much version raspberry of the board to various sensors and electronic components with the GPIO extension board..
【40pin GPIO Rainbow Fat Cable】IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable.
Material: High-quantity copper soft wire material for safe and durable.
Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests..
【830 Tie Points Solderless Breadboard】made of high quality ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling, with self-adhesive tape on back and multiple links to buckle..
【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit....

Check Stock

Makeronics 1660 Tie-Points Solderless Breadboard+Electronics Fun Kit |140 PCS U-Shape Jumpers |65 PCS Wires | Power Supply Module|Precision Potentiometer for Prototyping Circuit/Arduino/Raspberry Pi

✔️1660 Solderless Breadboard plus Electronics fun kit,Compatible with Arduino and Raspberry Pi.
✔️A Breadboard and Power Supply Module -Include a good range of LEDs, resistors, buttons, capacitors, a few transistors and diodes..
✔️140 pcs U-shape Solide Copper Jumper Wires plus 65 PCS Copper Jumpers Meet your project expetation。.
✔️Better improvement on product quality and durablity.
✔️Perfect for Arduino Shield Prototyping and Testing. Powered by Makeronics Technology.

Check Stock

Vilros Getting Started with MicroPython on Raspberry Pi Pico Kit

Vilros Getting Started With MicroPython on Raspberry Pi Pico Kit.
LEARN TO PROGRAM: 48 Page Full Color Guide features clear instructions with screenshots and covers: Getting to know your Pico, Programming with MicroPython, Physical computing, More Pico projects--Also Includes a Pin Reference Card for easy Pico Wiring.
CUSTOM PICO PARTS: Includes Battery Holder with Micro USB connector to power on the go, USB Cable to connect to a PC and program and a Panel to neatly hold the breadboard and battery holder for a neat and easy wiring experience.
STORE AND CARRY: Includes a Picoboat case to protect your pico when not in use and also includes a neoprene bag to store all the parts of the kit neatly.
HIGH QUALITY COMPONENTS: Includes 30 × Jumper wire variety --1 × Full Size (800 Hole) Solderless breadboard--12 × Assorted Color LEDs: ---5 × Push-button switches--10 × 330 Ω resistors--1 × Active piezoelectric buzzer--2 × 10 kΩ potentiometer--1 × HC-SR501 PIR sensor--1 × I2C 1602 LCD module--1 × WS2812B LED strip-- All Packed in a Clear hard plastic box for small part storage.

Check Stock

Generic 40 Pin Breakaway Headers 0.1' Male Equal Length Long Centered 6.25mm on Both Sides 15mm in Total(pack of 10)

Long enough to fit snuggly into a solderless breadboard.
Can be broken or cut into lengths of any size.

Check Stock

Fingerprint Heartbeat Detector

This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
Packed well in nice box, also each item packed well separately..
High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..

Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
40 x 10cm (4 Inches) Parallel Adjoined Wires.
Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.

Check Stock

Raspberry Pi User Guide

This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
Packed well in nice box, also each item packed well separately..
High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..

Check Stock

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.

Check Stock

Gikfun Prototype Shield DIY Kit A1 for Arduino Mega 1280 2560 R1 - R3 (Pack of 2pcs) EK1096x2

Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
The Prototyping Shield makes it easy for you to design custom circuits..
It's a convenient way to make your custom circuit and Arduino into a single module..

Check Stock