ReviewsSolenoid Valves For Weak

9L2Z7G391A Automatic Transmission Control Solenoid Pack Assembly Fits for Ford Explorer 2003-2010 Mustang 05-10 Thunderbird 04-05 Mercury Mountaineer 03-10 Lincoln Aviator 03-05 LS 04-06 5R55S 5R55W

  • Transmission solenoids are one of your automatic transmission’s many critical components. A transmission solenoid is an electro-mechanical component “valve” used to control the flow of transmission fluid in the transmission, and they open and close as per the electrical signals they receive from your vehicle’s engine or transmission control unit, which pulls its data from a series of speed sensors in the engine..
  • Modern automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car’s computer activates a transmission solenoid, which directs transmission fluid into the valve body to engage the correct gear. If one of these electro-mechanical valves fail, then all sorts of transmission problems can ensue..
  • This Automatic Transmission Control Solenoid Fits For the Following Vehicles: 2003-2010 Ford Explorer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L.
  • 2007-2010 Ford Explorer Sport Trac 6 Cyl 4.0L , 8 Cyl 4.6L.
  • 2005-2010 Ford Mustang 6 Cyl 4.0 , 8 Cyl 4.6L, 8 Cyl 5.4L.
  • 2004-2006 Lincoln LS 6 Cyl 3.0L, 8 Cyl 3.9L.
  • 2003-2010 Mercury Mountaineer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L..
  • Customers can find the product you need accurat....
Check Stock

DC 5V 12V 18V 24V 5A 150W PWM Motor Speed Controller, Mini Speed Control Switch, Speed Regulator with Stepless Variable Rotary Knob - for Electric Motor, Brush Motor, Car, Generator, Fan (DC 5-30V)

  • Wide voltage range - DC 5-30V PWM motor speed controller switch, rated output current 5A, maximum output current 15A, max power 150W.
  • Settable duty cycle, duty cycle upper and lower limits and working frequency - set up these 3 parameters according your own motors.
  • comes with start and stop button and can be controlled by external switch.
  • High percision digital encoder knob - can adjust the motor speed , more accurate and consistent than ordinary potentiometer, easy to match the value.
  • Soft-start protection - the current increases slowly when starting the motor, avoid the high shock current, effectively protect the motor and extend its service life.
  • Widely applications - good to control the output of power, brightness, speed.
  • perfect for DC drive motor, generator, LED lights, light bulbs, lamp, car, fan, micro-pumps, solenoid valves, micro-pumps, solenoid valves.
  • (Note: This product can only be used for DC brushed motors, not for brushless motors).
Check Stock

Lamerto 4 Terminal 200Amp 12V Solenoid Valve Replacement for White Rod-gers Part.# 586-902/586-105111/586-105111-3/114-1211-020-02

  • [Reference Part Number]: 586-902, 586-105111, 586-105111-3, 114-1211-020-02, SO51221, SBJ4201.
  • [Fit for Following Models]: 12V 200A Solenoid Replay for White Rod-gers..
  • [Features]: 200Amp, 12 Operating Voltage, and 4 Terminal Design..
  • [About Solenoid]: Solenoids are commonly used as the switch or valves which are entirely automated. It is usually used in automatic control circuits.....
  • [Note]: Before Purchase This Product, Please Check the Description or Part Numbers, or Use the Year/Make/Model to Confirm the Compatibility..
Check Stock

1 Brass Electric Solenoid Valve 110V AC NPT Normally Open Air Gas Water Viton

  • 1" NPT THREAD- Commonly used standard pipe thread in U.S...
  • SOLID BRASS -This valve's body is made of solid brass (very corrosion resistant material)..
  • NORMALLY OPEN- The solenoid's magnetic field will directly move the plunger and close the orifice for any fluid or gas flow, while energized..
  • FLOW DIRECTION- The arrow indicates the flow direction (horizontal mounting please)..
  • VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident)..
Check Stock

1 Brass Electric Solenoid Valve 12V DC NPT Normally Open Air Gas Water Viton

  • 1" NPT THREAD- Commonly used standard pipe thread in U.S...
  • SOLID BRASS -This valve's body is made of solid brass (very corrosion resistant material)..
  • NORMALLY OPEN- The solenoid's magnetic field will directly move the plunger and close the orifice for any fluid or gas flow, while energized..
  • FLOW DIRECTION- The arrow indicates the flow direction (horizontal mounting please)..
  • VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident)..
Check Stock

3/4 Brass Electric Solenoid Valve 110V AC NPT Normally Open Air Gas Water Viton

  • 3/4" NPT THREAD- Commonly used standard pipe thread in U.S...
  • SOLID BRASS -This valve's body is made of solid brass (very corrosion resistant material)..
  • NORMALLY OPEN- The solenoid's magnetic field will directly move the plunger and close the orifice for any fluid or gas flow, while energized..
  • FLOW DIRECTION- The arrow indicates the flow direction (horizontal mounting please)..
  • VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident)..
Check Stock

3/4 Brass Electric Solenoid Valve 12V DC NPT Normally Open Air Gas Water Viton

  • 3/4" NPT THREAD- Commonly used standard pipe thread in U.S...
  • SOLID BRASS -This valve's body is made of solid brass (very corrosion resistant material)..
  • NORMALLY OPEN- The solenoid's magnetic field will directly move the plunger and close the orifice for any fluid or gas flow, while energized..
  • FLOW DIRECTION- The arrow indicates the flow direction (horizontal mounting please)..
  • VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident)..
Check Stock

Pair Intake and Exhaust Camshaft Position Actuator Solenoid Valve Kit For Chevrolet Captiva Cobalt Equinox HHR Impala Malibu GMC Terrain Pontiac G5 Saturn Vue Buick Regal 2.0 2.2 2.4L

  • A camshaft actuator solenoid, normally installed in the front of each cylinder head, is used to precisely control the flow of oil into the camshaft actuator. This changes the rotation of the camshaft to adjust valve timing and valve overlap on the go. These solenoids are used to control both exhaust and intake camshafts, creating the possibility of lower emissions and essentially decommissioning exhaust gas recirculation valves, as well as better performance and fuel economy..
  • There are lots of ways that your car will indicate there is an issue with the camshaft position actuator. The problem is that the same indicators are used to denote all sorts of other problems with the camshaft, its various parts, and the engine. The engine light may come on inside the car, the car may sputter or have trouble starting, or the car may ride roughly once it gets going. You’ll want to get this problem fixed as soon as you notice it..
  • This Solenoid Valve Fits for the Following Vehicles: Chevy Captiva Sport 2012-2015,Cobalt 2006-2010,Equinox 2010-2015,HHR 2006-2011,Malibu 2008-2014.
  • Saturn Aura 2007-2009,Ion 2006-2007,Sky 2007-2010,Vue 2007-2010.
  • Buick Verano 2012-2015,Regal 2011-2015,LaCrosse 2010-2015.
  • Pontiac G5 2007-2010,G6 2006-2010,Sols....
Check Stock

KIMISS Car Transmission Solenoid Valve 28250-PRP-013 for Honda and Acura Models Transmission AT Clutch Pressure Control Linear Solenoid Valve 13 * 7cm / 5.1 * 2.8in

  • 【Main Function】This Transmission Solenoid Control Valve is consisting of a spring loaded plunger wrapped with a coil of wire, designed to open or close valves in the valve body to allow transmission fluid to enter..
  • 【Specially for for for for Honda Models】Our Transmission Linear is Specially designed to fit For Acura & for for for Honda vehicles. Please check the size and compatibility carefully before placing an order..
  • 【Professional OE Level】The prossional car transmission shift solenoid valve is an important vehicle electrical system executive control part with higher stablity and reliability, meeting or exceed OEM standards. The replaceable OE number for reference: 28250-PRP-013..
  • 【High Quality Construction】Made of high grade iron, the AT Clutch Solenoid Valve is of strong strength, high temperature and resistance for long time use..
  • 【Easy Installation】Plug and play. Easy to install without extra adjustment, perfectly match the original car. Convenient for assembly and disassemble.If you have any questions, please feel free to firstly check product description for a good solution..
Check Stock

1/4\ NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by AOMAG

  • VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket..
  • ISO/OEM/ODM/CE and1 year warranty. DIRECT ACTING and Normally Closed Valve (N.C.) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our AOMAG Motorized Ball Valves..
Check Stock

Tempo Communications 521A Wire and Valve Locator - Locate Wire Path, Depth, Wire Breaks, Large Nicks, Solenoid Valves (Latest Model)

  • PINPOINT VALVES: Valve solenoid ‘hotspot’ signal makes locating valves easy and rugged headphones block ambient noise.
  • HIGH POWERED TRANSMITTER: Offers extended long range and allows use on higher resistance wire paths.
  • ADJUSTABLE TRANSMITTER: Select the best signal for maximum performance.
  • ADJUSTABLE RECEIVER: Features an adjustable loudspeaker audio, headset audio and visual indications of signal strength.
  • LONG NOSE RECEIVER: Wand makes it easy for you to move quickly and locate even the longest wire paths.
Check Stock