ReviewsSolid Carbide Bars

Savannah Carbide Tip Turning Tool Large Size Round Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

Savannah Carbide Tip Turning Tool Large Size Square Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The square tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

IDEAL Electrical 36-311 TKO™ 4 Pcs Hole Cutter Kit – Carbide Hole Cutter Set Smooth Start Pilot Bit Carry Case

  • Superior Performance: TKO carbide tipped hole cutters provide the most precise and clean hole saw and knockout replacement in the industry with....
  • Precise Design: The hole saw cutter has ground carbide teeth made from high quality HSS producing clean, burr-free holes. The carbide cutter includes....
  • Smooth Cutting: The innovative design includes a SmoothStart pilot drill which guides the cutter to the surface, avoiding damage to the cutter and....
  • Convenient Usage: The carbide tipped cutting hole saw has an integrated arbor for solid rotation providing smooth accurate holes without chattering.....
  • Product Specifications: The TKO carbide tipped hole cutter kit is supplied with SmoothStart replacement tip, 7/8 in., 1 1/8 in. and 1 3/8 in. diameter....
Check Stock

Accusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108

  • 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
  • Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
  • It is not necessary to remove tool from chuck or tool post.
  • Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
  • 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.
Check Stock

Benchmark Abrasives 10' 60T TCT Wood Saw Blade for Finishing on Sliding Miter & Radial Arm Saws

  • SIZE – 10″ Blade Diameter, 60 Teeth, ATB Grind, 5/8″ Arbor, .094″ Kerf, MAX RPM = 6,700.
  • CROSSCUTTING & FINISHING – This wood cutting carbide saw blade is excellent for crosscutting and finishing of softwoods and hardwoods in a range of thicknesses, with occasional cutting of plywood, wood framing, decking, etc..
  • PREMIUM TUNGSTEN CARBIDE – The tungsten carbide tips are welded one by one to the tips of each blade in a fully automated manufacturing process..
  • SOLID STEEL CORE – Each of our wood blades is laser cut from solid metal sheets, not coil stock like other cheaply made blades. Benchmark Wood TCT blades are manufactured to exacting European standards..
  • SATISFACTION GUARANTEE – Benchmark Abrasives is proud to stand behind our products. If for any reason you are not completely satisfied, please contact us right away and we will make it right..
Check Stock

DEEFIINE Carbide Tipped Wood Lathe Turning Tools Set, Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable 19.5"Soft Grip Handle with Diamond Round Square Carbide Inserts

  • Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Ergonomic design: the turning tool kit is equipped with soft handle, fits comfortably in the hand，It has the characteristics of anti-skid, breathable, shock absorption, etc.
  • Easy to use: our woodturning tool makes the turning of wood considerably easier. This set of carbide rotary tools is very suitable for all levels of experience and makes wood turning faster and more interesting. Each lathe tool has two carbide tips with multiple sharp edges that can be rotated multiple times. Simply turn the knife head a....
Check Stock

Accusize Industrial Tools 4 Pc 1/2'' Round Shank Indexable Boring Bar Set with Tcmt21.50 Carbide Inserts, 90 Degree, 2627-9104

  • Round shanks allow the operator to set positive or negative rake. indexing the insert.
  • Chip breaker eliminates long stringer chips. It is not necessary to remove tool from chuck or tool post.
  • A new cutting edge may be presented by simply. Screw Down Style..
  • Positive Rake 90Degree Lead. Uses 0.050" key. C6 grade: carbide for steel and alloy steel..
  • 1/4" I.C. carbide inserts fit all bars. Radius = 0.015”. Key = T8. Shank: 1/2". Piece per set: 4..
Check Stock

Bosch 85283MC 1/4 In. x 25/64 In. Solid Carbide Veining Router Bit

  • Micrograin solid carbide – ensures consistently smooth finish cuts, with superior wear resistance.
  • Veining bit – used for recessed design veining in fine cabinet surfaces.
  • Solid carbide build – provide the best rigidity and long life, for faster feed rates and chip removal, hard-to-route materials and superior bit life.
Check Stock

3PCS S08K/S10K/S12M- SDUCR07 95 Degree Internal Turning Boring Bar with 10pcs DCMT21.51 DCMT070204 Carbide Turning Inserts for Machining Steel Parts and Stainless Steel Three Holder Set With Inserts

  • ☞Material : DCMT2(1.5)1 carbide Inserts with CVD coating ,55 degree diamond turning inserts ，used for machining stainless steel and steel parts.
  • ☞About the Internal Boring bars: 40Cr common steel with forging process , strong and durable ,95 degree right hand internal turning holder. Screw compression,easy to install and remove.
  • ☞Advantage: Offer long life and faster cutting speed, low friction coefficient, good wear resistance Designed for Steel, cast iron and non-ferrous materials.
  • ☞Application: The Minimum processing aperture is 3-5mm of the boring bar head diameter. Used for turning and finishing on a wide range of materials..
  • ☞Package includes: 3pcs Turning Boring Bars (S08K-SDUCR07 + S10K-SDUCR07 +S12M-SDUCR07 ) + 10pcs DCMT070204 Gold Carbide inserts + 3PCS T8 Wrenches.
Check Stock

DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)

  • Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed..
  • Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice..
  • woodturningTools and Accessories - 1pcs handle and 1pcs extensi....
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock