ReviewsSolid Carbide Reaming Tool

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 7/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

Simple Woodturning Tools COMBO: Mid Size Rougher, Turner & Hollower and Detailer Carbide Wood Turning Hand Tool Set with Interchangeable Handle for Wood Lathe (3 Tools w/Brilliant Red handle) USA Made

  • Benefits of Carbide Lathe Tools: Simple to use for all skill levels making woodturning fast and more enjoyable. You can focus on your project and not on techniques or sharpening. No long learning curve or expensive sharpening equipment. You can begin turning as soon as your box arrives because each tool comes with a very sharp, rotatable carbide cutter. Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • Handle Details: The most beautiful, solid aluminum lathe tool handle on the market, 100% USA made by American craftsman. CNC machined from solid aircraft aluminum for balance & durability. Beautifully powdercoated to a brilliant finish to last for years. Overall length is 12".
  • tool opening is 3/8" diameter. Tools can be easily changed by loosening the two stainless steel set screws.
  • Mid Size Tool Details: Premium quality, American-made, CNC machined from 3/8” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. These mid size carbide tools feature an overall length of 9", with a handle tang of 3/8" diameter x 2" length..
  • Tool Use: The mid size Simple Turner & Hollower is ideal for turning small bowls, handles, bottle stoppers, etc. T....
Check Stock

Amana Tool 217013 Solid Carbide Dowel Drill Bit Through Hole Boring Drill Bits 3mm D x 70mm Long x 10x25mm SHK Right Hand

  • DOWEL DRILL BIT – The Through Hole Solid Carbide Dowel Drill Bit is designed to drill and bore clean holes through hard and soft woods..
  • DESIGNED FOR – This 3 mm boring bit for doweling allows you to create dowel joints with your handheld drill..
  • CREATE CLEAN HOLES – Use the dowel bit to create clean, straight, and accurately sized holes in wood..
  • SOLID CARBIDE-GRADE – Special solid carbide through hole boring bit made for long-lasting cutting edge performance and tool life..
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..
Check Stock

Berard Olive-Wood Handcrafted Lemon Reamer

  • This tool makes the task of reaming lemons and limes effortless.
  • Use the tip to remove seeds before reaming.
  • Perfect tool to turn to when making anything from lemonade to margaritas.
Check Stock

Milwaukee 48-22-3108 Quick Adjust Reaming Pliers, 8-Inch

  • Exposed Reaming Handles - Up to 1-Inch Conduit (Patent Pending).
  • Reaming Head Design - Smooths out rough edges of up to 1-1/2-Inch Pipe (Patent Pending).
  • Quick Adjust Jaws - V-groove jaws create a more precise fit with up to 1-1/2-Inch Jaw Capacity.
  • Forged Alloy Steel - For Maximum Tool Strength.
  • Rust Protection - Increases tool life by reducing corrosion.
Check Stock

Vipbhtool 1/4 Inch Shank Spiral Flush-Trim Router Bits Milling Spiral Flush Trim Bit Router Bits Pattern Bit Solid Carbide Flush Trim CNC Down Cut Spiral Router Bits

  • 1/4 Inch Spiral Flush Trim Router Bits. Shank: 1/4 inch.
  • Spiral Flush-Trim Router Bits Solid Carbide Flush Trim Router Bit 1/4-Inch Shank Spiral Flush Trim Down Cut. The design down-cut sharp flutes would eject chips more quickly from the routing materials..
  • Can be used with handheld, table-mounted and CNC routers. Flush trim all types of material for a perfect finish. Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. The bit features high quality carbide for more efficient material removal. Each bit is manufactured from high quality steel for added durability and long life..
  • Made of Solid Carbide, Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool, provide precise, efficient cuts and offers extreme durability. Precison finish and micro-grain carbide could assure of good performance and long tool life..
  • Our Down Cut Spiral Router Bits Redesigned with permanent bearing retaining collar to reduce trimming mishaps. For use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. Perfect for edging, trimming, veining and grooving in all woodworking projects for both professional carpenters and hobbyists..
Check Stock

Savannah Carbide Tip Turning Tool Large Size Round Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock