CITCO Tools Aluminum Oxide Dressing Sticks, 150 grit, 1" x1" x 6", Made in The U.S.A. - 5 Pack
- Diamond & CBN wheel dressing applications.
ReviewsSolid Cbn Inserts
CNC Spoilboard Surfacing Router Bit, 1/4' Shank 1' Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK
- 2-WING INSERT CNC ROUTER BIT: Shank: 1/4″.
- Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
- INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
- COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
- This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
- Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Hahiyo Screw in Nut Threaded Inserts M8 Bolt Fastener Connector Hex Socket Drive Keep Straight Turn in Cleanly Flush with Project Surface Easy to Install for Wood Furniture Zinc Alloy 18pcs
- The threaded inserts can open and close a panel without damaging the wood.Go in cleanly.They won’t strip out of your projects.These go into hardwood also won't spend much time and the top has a flared edge to countersink flush with surface,good for parts that articulate closely with others.A solid way to affix the legs.They are easy to back out if necessary..
- Easy to install:the threads on the inside and outside are both spot on.They will keep straight and the bolts turn in easily.You just need to drill a clean hole for the inserts,and then use an L bracket to attach these fasteners to lock down your project,you can wiggle the screw around in a small circle to position once it is fully in.They will fit in very snugly.Particularly convenient for handle..
- Very sturdy:the threaded Inserts are solid,and threads are sturdy.They won't come loose or tear out.The threaded inserts to be more durable than brass ones when used in plywood.The bolts threaded will right into the wood well.Strong wood inserts and tight thread tolerance can make your projects long-lasting..
- Versatile use:the threaded Inserts are playing a very important part role in many home projects.Suitable for repairing poorly-constructed cabinets,closet,knock-down furniture,woodworking projects,....
CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK
- 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
- Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
- INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
- COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
- This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
- Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
CITCO Tools Aluminum Oxide Dressing Sticks, 150 grit, 3/8" x 3/4" x 4", Made in The U.S.A. - 5 Pack
- Diamond & CBN wheel dressing applications.
Sopko 100-1 L.H. 2-1/4\ Diam Grinding Wheel Adapter for 3/4\ Wheel Width
- Series II wheels are made from an aluminum core, which is lighter in weight than steel and will run smoother on all grinders.
- Ideal for sharpening woodturning tools (High Speed Steel only).
- Designed for use with bench type grinders.
- Wheel diameter does not change over time.
- CBN material is on the face and sides (1/4") of the wheel.
- Balanced in the manufacturing process and never need "Truing" or "Dressing".
E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, #10-32 Internal Threads, 5/16\-18 External Threads, 0.315\ Length, Made in US (Pack of 10)
- THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
- INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
- QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
- FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
- STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6
- THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
- SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
- FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
- FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
- IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..
E-Z Lok Externally Threaded Insert, C12L14 Carbon Steel, Meets AISI 12L14, 1/4\-20 Internal Threads, 7/16\-14 External Threads, 0.437\ Length, Made in US (Pack of 10)
- THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
- INSTALL WITH STANDARD TOOLS – 12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
- QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
- FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
- STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..
Sandvik Coromant CoroCut 1-Edge CBN Profiling Insert, CB7015 Grade, TiN Coating, 1 Cutting Edge, N123F1-0300-RE, 0.0591\ Corner Radius, F Insert Seat Size
- Material Type: Cubic Boron Nitride (CBN).
E-Z LOK - 650-10 E-Z Lok Externally Threaded Insert C12L14 Carbon Steel M10-1.5 Internal Threads 9/16 -12 External Threads 13.08mm Length Made in US Pack of 10
- THREADED INSERTS FOR METAL – E-Z LOK Thread Inserts for metal. Solid threaded inserts that are strong, easy to install, and self-locking. For optimal holding power in metal..
- INSTALL WITH STANDARD TOOLS – C12L14 Carbon steel threaded inserts. Install with standard tools. No special drills, taps, or special installation tools are needed..
- QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with these steel thread inserts..
- FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
- STRONG THREADS MADE EASY – Simply drill the hole with a standard drill. Tap the hole with a standard tap. Turn in the insert with a screwdriver, bolt/jam nut, or an E-Z LOK drive tool..