ReviewsSolid Lubricant Bearing

SKF F4B 103-RM Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-3/16\ Bore, 3-1/4\ Bolt Hole Spacing, 4380lbf Dynamic Load Capacity

Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Set screw locking for secure attachment to shaft.
Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Grease fitting on the housing for reapplying lubricant.

Check Stock

SKF F4B 204-TF Ball Bearing Flange Unit, 4 Bolts, Set Screw Locking, Regreasable, Seals with Flingers, Cast Iron, 2-1/4\ Bore, 5-5/8\ Bolt Hole Spacing, 11840lbf Dynamic Capacity

Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Set screw locking for secure attachment to shaft.
Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
Grease fitting on the housing for reapplying lubricant.

Check Stock

SKF F4BM 300-TF Ball Bearing Flange Unit, 4 Bolts, Medium Duty, Set Screw Locking, Seals with Flingers, Cast Iron, 3\ Bore, 6\ Bolt Hole Spacing, 16360lbf Dynamic Capacity

Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
Set screw locking for secure attachment to shaft.
Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
Grease fitting on the housing for reapplying lubricant.

Check Stock

Fireball Dragon Skateboard Bearings 8 Pack - Fast 608 Longboard Bearings Set fits Skateboards Inline & Roller Skates - Precision Made & Guaranteed for Life Race

RACE PRE-LUBED FOR FAST SMOOTH SKATING - Ultra smooth and long lasting performance with our signature skate lubricant formula. These bearings are....
ULTRA SMOOTH - Unlike competitors, Dragons are made from high grade steel, w/ Nylon ball bearing cage (reduced friction & a fluid roll) & 2 Rubber....
INCREASE PERFORMANCE - w/ our signature Dual-Labyrinth Shields, designed to keep dirt/debris out & maximum lubricant retention. This helps improve....
8 x 608 BEARING SKATE RATED BEARINGS manufactured to +/- 0.008mm. 1 Set fits 4 wheels. Order 2 sets for inline roller skate use. Specs - 22mm (outer....
LIFETIME BEAST GUARANTEE - for peace of mind against manufacturing defects for the life of your skateboard bearing. The perfect worry-free upgrade to....

Check Stock

Palmetto 1555 Series Graphite Filament Compression Packing Seal, Dull Gray, 5/16\ Square, 10' Length

Compression packing seal protects rotating and reciprocating equipment from fluid leaks in severe service and high-speed applications.
Graphite filament impregnated with graphite particles dissipates frictional heat away from the shaft, enabling high shaft speeds and reducing leakage.
Solid lubricant provides a bearing film to prevent wicking and fraying.

Check Stock

ARCTIC F14 Silent - 140 mm Case Fan, Ultra-Quiet, Extra Quiet Motor, Computer, Almost inaudible, Fan Speed: 800 RPM - Black/White

GREATER EFFICIENCY - LESS NOISE AT HIGHER AIRFLOW: At low fan speed, the motor noise is key, a motor developed in Germany with a new alloy/lubricant combination reduced friction and noise.
INNOVATIVE DESIGN: Design of fan blades improves air flow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case.
LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
TECHNICAL DATA: Fan speed: 800 RPM, Airflow: 46 CFM/78 m³/h (@ 800 RPM), Noise Level: 0.08 Sone (@ 800 RPM), Pin: 3-pin.

Check Stock

ARCTIC F12 Silent - 120 mm Case Fan, Very Quiet Motor, Computer, Almost inaudible, Push- or Pull Configuration, Fan Speed: 800 RPM - Black

GREATER EFFICIENCY - LESS NOISE AT HIGHER AIRFLOW: At low fan speed, the motor noise is key, a motor developed in Germany with a new alloy/lubricant combination reduced friction and noise.
INNOVATIVE DESIGN: Design of fan blades improves air flow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
TWO WAY INSTALLATION: Blow warm air out of the case. Draw cool air into your case.
LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life.
TECHNICAL DATA: Fan speed: 800 RPM, Airflow: 37 CFM/62.9 m³/h (@ 800 RPM), Noise Level: 0.08 Sone (@ 800 RPM), Pin: 3-pin.

Check Stock

Boeray 115pcs 1/4“ 1/8” Hydraulic Grease Brass Zerk Fitting SAE Standard Assortment Kit-Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set

Material: High quality solid brass, bronze.(Notice:it sticks to a magnet because there is a high quality steel spring ball that promotes oil filling).
Quantity: Totally 115pcs, packed in plastic case with clear label,more convenient.
Size: SAE standard, inch size,Straight 1/4”-28 (25pcs).
Characteristics: high quality, no leak and no rusting, much better than steel zerk fitting.
Usage: replacement parts for automotive gardening industrial areas, simply insert lubricant directly into the bearing without having to disassemble or replace the bearing.
For restoration and replacing missing or broken grease zerks on your machinery.

Check Stock

MOOG ES3545 Tie Rod End

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer....
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and....
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.

Check Stock

MOOG ES3546 Tie Rod End

RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer....
GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants.
ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear.
PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and....
STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.

Check Stock

Heady Shake Skateboard Bearing Oil (Speed Mode) – Ultra-Fast, Super Smooth Wheel Lubricant – Premium Light Cream Lube for Longboards, Skate Boards, Inline Skates, Quads, Rollers

PREMIUM SKATE BEARING LUBE – This 15 mL (1/2 fluid oz) bottle of ball bearing lube is designed for “Speed Mode”, which gives you a faster, smoother ride for an unbeatable experience..
HIGH-QUALITY OIL-BASED LUBRICANT – Unlike thick, sticky grease, these is a grade-A skate oil designed specifically to match the needs of ceramic skate wheel bearings..
PREVENTS LOCKING AND FREEZING – Applying our light bearing oil to your bearings before skating or longboarding can help prevent dryness which damages wheels..
COMPLETE SKATE COMPATIBILITY – Heady Shake “Speed Mode” lubricant works with all skate brands and board types, including longboards, skateboards, and in-lines..
UNBEATABLE HEADY SHAKE QUALITY – Every Heady Shake product is backed by superior quality and reliable customer service for a skate brand you can trust..

Check Stock