ReviewsSolid Terminal Nut Spark Plug

Engine Timing Light with Spark Plug Tester,Inductive Timing Light Gun Timing Light Ignition Testers Engine Ignition Coil Tester for Car Motor Motorbike Vehicle Motorcycle Marine Lawnmower

  • ... Out of Power★ -The cool thing about timing lights is that unlike a flashlight, you never have to worry about running out of power the light. That is, as long as your car runs and is connected to a working 12-volt battery. With the engine off, you merely clamp the timing light's red wire to the battery's positive terminal, then the black wire to the battery's negative terminal. Lastly, you take the signal wire and clamp directly to Number 1 spark plug wire..
  • ★ Ergonomic Pistol Grip Design ★ - First, you should know that timing lights come in a few different shapes and sizes.But most people would probably prefer the much cooler, ray gun-shaped, "pistol grip" variety.Because they're more ergonomic inside the close confines of a car's engine bay (yeah, that's it). Handle pistol-type design conforms to the engineering design, the button is comfortable, feels good, facilitates the operation..
  • ★ Extended Length Cables Easy Connect To Car's Engine Bay★ - Sensor Clips Cable length up to 4.54 ft .Never worry about the length of the cable is not long enough.Adapts to all kinds of 12V battery for automobiles, motorcycles, ATVs, personal watercraft, RVs, boats, airplanes, golf carts, lawn mower, etc ..
  • ★ Engine Ignition Spark Tester As Bonus ★- Use th....
Check Stock

ACDelco 748UU GM Original Equipment Spark Plug Wire Set

  • The same performance as your GM vehicle’s original factory component.
  • Spark plug distributor boot shape and materials provide proper fit, installation, and water-tight seal.
  • Terminal design improves spark plug retention and assists installation with excellent corrosion resistance.
  • Fiberglass braid and carbon impregnated fiberglass core for added strength and superior conductivity.
  • Engineered for electromagnetic interference and radio frequency interference (EMI/RFI) noise suppression.
Check Stock

ACDelco 758EE GM Original Equipment Spark Plug Wire Set

  • The same performance as your GM vehicle’s original factory component.
  • Spark plug distributor boot shape and materials provide proper fit, installation, and water-tight seal.
  • Terminal design improves spark plug retention and assists installation with excellent corrosion resistance.
  • Fiberglass braid and carbon impregnated fiberglass core for added strength and superior conductivity.
  • Engineered for electromagnetic interference and radio frequency interference (EMI/RFI) noise suppression.
Check Stock

CruzTOOLS SKHD SPEEDKIT Tool Kit for Harley-Davidson Motorcycles black

  • The new SPEEDKIT provides unprecedented capability in an ultra-compact 7" x 2" x 2" pouch.
  • The SKHD was developed to cover the most common needs of all Harley-Davidson models except the V-Rod.
  • Includes wrenches, nut drivers, star bits, hex wrenches, 5-in-1 screwdriver, pliers, 2-in-1 spark plug socket, and a tire pressure gauge.
  • Perfect for stashing in a saddlebag or fork bag.
  • Kit Contents: 14 x 17mm Open End Wrench, 12mm Combination Wrench, 10mm Combination Wrench, 8mm Nut Driver, 5/8″ & 18mm Combo Spark Plug Wrench w/....
Check Stock

2 Pieces Spark Plug Tool Spark Plug Gauge Measuring Tool Wire Spark Plug Gauge Tool Adjustment Tool Metric Standard Inches Gauge for Motorcycles

  • Accurate and easy to read: the scale range of this spark plug space gauge tool includes 0.040, 0.044, 0.045, 0.050, 0.060, 0.080 inch, and the metric sizes are engraved on the back for clear reading, easy to read.
  • space adjuster: the spark plug space tool is located on both sides of spark plug space gauge, which can adjust spark plug space, you can target the tool’s slot into the hook of spark plug and pull slightly to make adjustment.
  • Solid construction: our spark plug space gauge measuring tool is made of metal, which is durable and reliable to use, solid construction allows for strength and durability, built for resilience and flexibility, engineered to measure clearances of spark plug space size.
  • Easy to store: the space adjustment tool measures approx. 1.9 inch/ 4.8 cm in diameter and are packed in a plastic storage box for easy storage, proper size to use and convenient to store when not in use.
  • What you receive: there are 2 pieces of wire spark plug space gauges in this package, enough quantity to meet your daily use and replacement, will bring much convenience to you in everyday life.
Check Stock

NGK Spark Plug BR8ES- Set of 4

  • Thread Size: 14mm, Thread Pitch: 1.25mm, Seat Type: Gasket, Resistor Value: 5K Ohm, Reach: 19mm (3/4")..
  • Hex Size: 13/16" (21mm), Terminal Type: Removable Nut, Overall Height: ISO, Gap:.031" (0.8mm)..
  • Material: Nickel, Type: Standard, Size: 2.5mm, Projection: Non-Projected..
  • NGK standard plugs are constructed for longer life and optimum performance..
Check Stock

2 PCSNEW --- NGK # 4929 Standard Spark Plugs -- DPR8EA-9

  • Thread Size: 14mm, Thread Pitch: 1.25mm, Seat Type: Gasket, Resistor Value: 5K Ohm, Reach: 19mm (3/4")..
  • Hex Size: 13/16" (21mm), Terminal Type: Removable Nut, Overall Height: ISO, Gap:.031" (0.8mm)..
  • Material: Nickel, Type: Standard, Size: 2.5mm, Projection: Non-Projected..
  • NGK standard plugs are constructed for longer life and optimum performance..
Check Stock

BTSHUB Engine Timing Light Xenon Vehicle 12V Ignition Inductive Strobe Timing Light Tool Compatible for Car Motorcycle, Marine, Lawnmower

  • 【Wide Applicatons】: Design to re-timing your car's ignition to get the best performance that you can. Suitable for car, vehicle motorcycle, marine, all two-stroke, and four-stroke gasoline engines, easily operate on 12V ignition systems.
  • 【Professional Tool 】: Solid-state burnout-proof polarity with automotive reverse, it is polarity and overload protection. It`s sliding clamp-on inductive pick-up, for easy and safe hookup.
  • 【Pistol Grip Design】: Handle pistol-type design conforms to the engineering design, the button is comfortable, feels good, facilitates the operation.
  • 【Sensor Clips】: The sensor clip is red and black to distinguish positive and negative poles, easy to use, and more secure. And the color of the wire is also different to prevent the glue sleeve of the clip to come off and difficult to distinguish.
  • 【 How to use】: (1) Switch off the engine of your car, (2) Clamp red clip to the positive terminal of the car battery, (3) Clamp black clip to the negative terminal of the car battery, (4) Connect the largest clip directly to the wire of #1 spark plug wire.
Check Stock

Nkg Spark Plug Atv, Motorcycle, Snowmobile Br8es 5422 Boxed

  • Thread Size: 14mm, Thread Pitch: 1.25mm, Seat Type: Gasket, Resistor Value: 5K Ohm, Reach: 19mm (3/4")..
  • Hex Size: 13/16" (21mm), Terminal Type: Removable Nut, Overall Height: ISO, Gap:.031" (0.8mm).
  • Material: Nickel, Type: Standard, Size: 2.5mm, Projection: Non-Projected.
  • NGK standard plugs are constructed for longer life and optimum performance..
Check Stock

Glarks 25Pcs Ratchet Spark Plug Wire Crimper and 180 Degree/90 Degree/Straight Spark Plug Coil Terminals Boots Set for Crimping and Stripping Spark Plug Ignition Wire

  • ♛【What You Get】: In this tool sets, it includes a spark plug crimping tool, 180, 90 and 180 degree spark plug coil terminals with boots, each for 8pcs, which are well packed in a box..
  • ♛【Crimping Tool】: The spark plug crimping tool is made of high quality 45# steel, after hardened construction make it solid and durable.
  • Soft PP crimper handle for comfort, reduce the working fatigue..
  • ♛【Spark Plug Coil Terminals】: Come with 24pcs 180 degree/90 degree/straight spark plug coil terminals, diameter is 8mm, fit for 8mm wire. They are made of high quality brass, with high electrical conductivity, durable and stable. Black rubber boots are matches well with terminals, will keep them from dirt and moisture..
  • ♛【Product feature】: The wire crimping tool works on spark plug wire diameter is 8mm. The tool itself includes spark plug wire crimping and stripping function.
  • self-adjustable ratchet mechanism design ensure a perfect crimp for every time. The stripper will work great and cut just enough insulation to not damage the conductor..
  • ♛【Warranty】: 100% quality assurance, we provide our customer guarantee and urgent response.Please feel free to contact us if you have any questions..
Check Stock

kipa Spark Plug Wrench for 1997-2019 Shadow Ace Aero Phantom Spirit Tourer 750 18mm Replace OE 89216-MBA-000 Durable Superior Reliability

  • Top Quality Spark Plug Wrench Tool, Well-machined, strictly QC-tested before packing, made of sturdy, tough prime materials that Vehicle repair Ensure....
  • MPN: Aftermarket Solid Spark Plug Wrench tool Replace for OE Part Number 89216-MBA-000.
  • Fitment: Spark Plug Wrench Tool Replace for 1997-2003 Shadow Ace 750, 2004-2016 Shadow Aero 750, 2009 Shadow Tourer 750, 2010-2013 Shadow RS 750.
  • Fitment: Spark Plug Wrench Tool Replace for Honda 2001-2009 & 2012-2014 Shadow Spirit 750, 2010-2017 & 2019 Shadow Phantom 750..
  • If you have a Shadow 750 Or 750 ACE and your looking at changing the spark plugs yourself... No modified socket is ever going to work right and you....
Check Stock