ReviewsSpacer Installation Instructions

ORION MOTOR TECH 4x156 Wheel Spacers, 2 Inch ATV Wheel Adapters with M12x1.5 Studs Compatible with Polaris RZR XP 1000 Trail 900 900 XC Polaris Ranger, Wheel Spacer Kit with 131mm Hub Bore, Set of 4

  • SAFE AND SECURE: This Orion Motor Tech 4x156 ATV wheel spacer kit improves the cornering, stability, handling, and control of your vehicle by adding 4 inches to its axle track.
  • PREMIUM MATERIAL: These wheel adapters are made from solid blocks of T6 aircraft-grade aluminum, keeping them lightweight, highly durable, and strong.
  • the 16 zinc coated M12x1.5 bolts are heat treated for superior strength and resistance to wear and tear.
  • WIDE COMPATIBILITY: Our wheel adapter set is compatible with many Polaris vehicles, including Polaris Ranger, Polaris RZR Trail 900, and more.
  • see below for a full list of compatible models.
  • EASY INSTALLATION: These car accessories are precision machined to fit any 4x6.1 inch ATV wheels.
  • their intuitive design and clear instructions guide simple and quick installation so you can add style and flair to your vehicle in no time!.
  • 1 YEAR WARRANTY: Increase your axle track, give your vehicle more traction on the road, and enjoy a slicker appearance with this sturdy wheel spacer set, your peace of mind assured by its strong 1 year warranty and Orion Motor Tech's usual friendly customer service.
Check Stock

Supreme Suspensions - Front Leveling Kit for 2004-2022 Ford F150 2003-2017 Ford Expedition and 2005-2008 Lincoln Mark LT 2.5 Front Lift Aircraft Billet Strut Spacers Kit 2WD 4WD Black

  • COMPATIBLE WITH 2004 - 2022 Ford F-150 (2WD 4WD), 2003 - 2017 Ford Expedition (2WD 4WD) and 2005 - 2008 Lincoln Mark LT (2WD 4WD). *Does NOT Fit F-150....
  • CONTENTS: (2x) T6 Aircraft Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack..
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that....
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install..
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires..
Check Stock

Supreme Suspensions - Full Lift Kit for 1999-2004 Grand Cherokee WJ 3' Front + 2.5' Rear Suspension Lift Kit + ProComp ES3000 Series Shocks 2WD 4WD

  • COMPATIBLE WITH 1999 - 2004 Jeep Grand Cherokee WJ (2WD 4WD).
  • CONTENTS: (2x) High-Density Delrin Front Spring Spacers, (2x) High-Density Delrin Rear Spring Spacers, (4x) ProComp ES3000 Series Shocks, Installation Instructions, and Supreme Suspensions Pro Pack..
  • TECHNICAL NOTES: 3 inch front and 2.5 inch rear lift. Please note that lift amount does NOT equal spacer thickness.
  • it is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved..
  • INSTALLATION: After an easy 2-4 hour installation process*, you're ready to feature your new and improved ride! For a safe installation process we recommend using a Coil Spring Compressor Tool. *An alignment is always recommended if you are altering the height of your vehicle..
  • BENEFITS: Improves the look of your Jeep and increases ground clearance, allowing you to fit larger wheels and tires. Delrin has the highest tensile strength of any thermoplastic and does not compress under load. Upgrade your suspension with performance series shocks..
Check Stock

Supreme Suspensions - 3" Front Leveling Kit for 2006-2020 Dodge Ram 1500 4WD T6 Billet Aluminum Strut Lift Spacers (Black) - Microfiber Cleaning Towel Included with Purchase

  • COMPATIBLE WITH: 2006 - 2020 Dodge Ram 1500 (4WD Only). *Does NOT Fit Mega Cabs, TRX, Rebel or Warlock Models. / *Not compatible with trucks equipped with the Active-Level Four-Corner Air Suspension..
  • CONTENTS: (2x) T6 Aircraft Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions, Supreme Suspensions Pro Pack and one Premium Microfiber Cleaning Towel.
  • TECHNICAL NOTES: 3 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved..
  • BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires..
  • INSTALLATION: After an easy 1-2 hour installation process*, you're ready to feature your new and improved ride! No special tools are required to mount these "bolt-on" spacers. *An alignment is always recommended if you are altering the height of your vehicle..
Check Stock

GlowShift 2-1/4'-2-1/2' Clamp-On Wideband Air/Fuel Ratio Gauge Oxygen Sensor Bung Adapter - No Weld Design

  • GlowShift Clamp-On Wideband Air/Fuel Oxygen Sensor Bung Bracket Adapter Allows Users to Easily Install a Sensor to the Exhaust Pipe with a No Weld Design - DIY Friendly.
  • Adjustable Bracket from 2-1/4" to 2-1/2" - Installs to Vehicle's Exhaust Pipe.
  • 304 Stainless Steel Bracket with (2) Bolts, (2) Nuts, (2) Crush Washers, (2) Flanges, (1) Removable Spacer & Exhaust Gasket to Prevent Leaks.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

TORCH Lift Kit For 2000-2006 Chevy Tahoe GMC Yukon Suburban 1500 SUV 4WD 4X4 3 Front 3 Rear Lift

  • FITS: 2000-2006 Chevrolet Tahoe & Suburban 1500 2WD 4WD 2000-2006 GMC Yukon & Yukon XL & Suburban 1500 2WD 4WD 6 LUG MODELS WITH TORSION BAR....
  • CONTENTS: Front Adjustable Lift Torsion Keys, Billet Rear Spacer Lift Kit (CNC Machined and Anodized Black), Front Shock Extenders and Hardware.
  • INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic..
  • Ships Same/Next Business Day. 2-3 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
  • Notes: 6 LUG MODELS WITH TORSION BAR SUSPENSION ONLY.
Check Stock

MLKYCSKE Golf Cart Accessories Steering Column Rebuild 12 Kit fits Club Car DS Gas and Electric Models from 1987-Up, Replaces Part Number 1014216

  • Replaces OEM 1014216, this kit contains everything you'll need to totally rebuild the steering column to get rid of any looseness you might experience. Recommendation: try to use a combination of new and old parts to rebuild the steering system or replace all.
  • Kit contains: Includes 2 Steering Wedges (1014125), 2 Bearing Assemblies (1014213), 1 Steering Snap Ring (1012605), 2) Steering Bearing Seats (1014126), 1 Steering Shaft Seal (1014211), 1 Steering Column Spring (1014217), 1 Steering Retaining Ring (1014214), 1 Top Steering Tube Gasket (1012466), one (1014212) nylon spacer used only in 1987 from serial number A8719-117332 to A8751-135102.
  • Bearings need to be filled with grease before installation, Pay attention to the bearing installation direction. If it is not clear, mark it when disassembling. At the same time, there are installation instructions in the package.
  • MLKYCSKE product well-built: designed to meet or exceed original manufacturing specifications, all product items tested for reliability, durability and performance.
  • Provide you with satisfactory after-sales service, 1-year free warranty on the quality of mechanical parts.
Check Stock

Muzata PA26 Side Mount Spacer 5/16” in Thickness Quality Aluminum Weldless for Installing 36\ Side Mount Cable Railing Post PF01 PF02 PM05 Edge Extender Nightscape Concrete Deck Stairs (2Pack)

  • Side-mounted Installation - this side mount spacer is specially designed to even up the protruding edge of the landing or staircases. It can be used as an extender to fix the side-mounted post against it. With a thickness of 5/16’’, it can fill in space less than 5/16’’. Once properly installed, it can provide more security and stability.
  • Custom design - This side mount spacer is custom-designed for MUZATA side-mounted posts PF01, PF02, PM05. To install 36" side-mounted posts, pls search PA13 for 1" side mount spacer, PA14 for 2" side mount spacer, PA26 for 5/16" side mount spacer, PA22 for 1/8" side mount fastening kit.
  • Weather protection - This side mount spacer is made of quality aluminum with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence.
  • Related Products - you might need following products to install the post. Cable railing posts Muzata PM05, surface mount base PA19, level bracket PA20, corner bracket PA21, flat angle bracket PA15, curved angle bracket PA16, side mount spacer PA26 or PA27, drill template CT22, post toolkit PA28.
  • MUZATA is a leading cable railing company that provides premium products with favorable prices. Over years o....
Check Stock

EZISOE 4PCS 5x4.5 Wheel Spacers 0.59 inch, 5x114.3 Black Wheel spacers 64.1mm Hub Centric with 12x1.5 Studs, Replacement for RDX TLX CDX CSX ILX RSX TSX

  • Replacement for Wheel Spacers: Compatible with 1991-2005 NSX (Rear Axle ONLY), 2002-2006 RSX, 2004-2014 TSX, 2001-2004 CL, 1997-2001 Integra Type R, 1999-2008 TL, 2003-2006 MDX, Honda: 1998-2014 Accord, 2006-2014 Civic, 1997-2014 CRV, 2003-2006 Element, 1995-2004 Odyssey, 1997-2002 Prelude, 2000-2008 S2000 (Rear Axle ONLY), 2010-2014 CR-Z, 2003-2008 Pilo.
  • 5x4.5 (5x114.3mm) Wheel Spacers Spec: Set of 4, 15mm thickness per spacer, Hubcentric: 64.1mm, Thread Pitch: 12x1.5.
  • Installation: It is recommended that the wheel spacers be installed by professionals. A torque wrench is required for installation, and an electric wrench cannot be used.Please read the installation instructions carefully, you can also contact us, we will provide you with the installation video.
  • Performance: EOTH wheel spacers not only improve the stability and handling of your vehicle, but also give your vehicle an extra aggressive look.
  • Warranty: We provide 1 year warranty. If the product has any quality problem, you can contact us at any timeWe will reply you within 24 hours.
Check Stock

SKYSEN 6FT Sliding barn Door Hardware kit, Barn Door Track, 1/4” Thick Material- Combination Track- Smooth and Quiet- Easy to Install- Black (J Shape-5)

  • ... plastic spacer). The bolts and leg screws are 8.8 grade (Keep the barn door hardware system last for long). The surface is spray black powder coat (Anti-rust, Looks smooth)..
  • [EASY TO INSTALL] Barn door track pre-drilled hole space is 16", Step by Step Instruction included. Our Instruction is listing every step for installation from A to Z. You can finish the installation of barn door hardware kit in half an hour if you get 2 workers. In case you get any problem or missing parts during installation, please free feel to contact us via amazon..
  • [IF MY BARN DOOR FIT THIS SIZE] 6FT Barn door hardware kit fit for door panel width up to 36”, Fit for door thickness from 1-3/8" to 1-3/4"(If you your barn door panel is too thin, then you can using the 5mm black spacer pad inside package, if your barn door is too thick, then you need to buy longer bolt extra). If you have a door way trim, then you need to buy an extra trim board to install the barn door track or just remove your trim..
  • [WHY US] Get super quality barn door hardware kit from us, All the barn door track and barn door roller have been inspected in factory before delivery, Also they have been Passed 100,000 times opening and closing test to ensure the barn door hardware kit you get will works fine.....
Check Stock

Muzata PA25 Side Mount Fastening Kit 1/8\ Stainless Steel Weldless for 42\ Cable Railing Side Mount Post PF01 PF02 Tread Reinforced Board Wood Concrete Deck Stairs 2Pack

  • Side-mounted Installation - This reinforced board is used to strengthen the board of the landing or staircases where the 42’’ side-mounted post can be installed against it. With this 1/8" side mount fastening kit, you can clamp the board tightly with fastening bolts, widening the bearing area and reinforcing the installation of the 42’’ side-mounted post. Once properly installed, it can provide more security and stability.
  • Custom design - This side mount fastening kit is custom-designed for MUZATA side-mounted posts PF01 and PF02. It can also be used as side mount spacer. To install 36" posts, pls search PA13 for 1" side mount spacer, PA14 for 2" side mount spacer, PA22 for 1/8" side mount fastening kit. To install 42" posts, pls search PA23 for 1" side mount spacer, PA24 for 2" side mount spacer, PA25 for 1/8" side mount fastening kit.
  • Weather protection - This side mount fastening kit is made of quality T304 stainless steel with great rust resistance and will work for a long lifetime. It is ideal for both indoor and outdoor applications like deck, stair, porch, balcony, and fence.
  • SpaceSaver system - Except for the side mount fastening kit, a complete cable railing system can include posts (PF01 PF02), handrails (Muzata HT10 for flat, HT2....
Check Stock