ReviewsSpacer Ring

Piston Ring Set - Standard - Fits Honda Z50 Z50R 1968-1981 Standard Size Rings

Standard piston ring set for the stock bore domed piston on the Honda Z50 from 68-79..
Set comes with 4 rings and the oil ring spacer..
Replaces Honda Part Number: 13010-036-000, 13010-036-013, 13010-036-014.
It does NOT fit the flat top piston, see specific fitment below..

Check Stock

Ring Size Adjuster for Loose Rings, Transparent Silicone Jewelry Sizer, Mandrel for Making Jewelry Guard, Spacer, Sizers, Fitter for Women Loose Rings Fit Almost Any Ring - 8 Pack, 4 Sizes

VIRTUALLY INVISIBLE ON RINGS : The silicone ring sizer adjuster made of high-quality Transparent TPU Material and Updated Unique Design, Virtually Invisible when on rings..
REDUCE RING SIZE : Totally 4 Sizes in One Pack, Reduce Ring Size 0.5-2 Size, Perfect ring size adjuster for loose rings, Prevent the ring sliding off your finger..
SOFT FLEXIBLE TPU : Ring sizer is non-toxic, Safe to use on skin, Soft and Comfortable to wear, No Pain and No Irritation to your fingers, odorless and environmentally friendly..
FITS ALMOST ANY SIZE RINGS : Ring guard fits Ring Width from 1mm to 10mm, Perfect for both Womens Rings and Mens Rings(even Wide Rings). Works with Big Knuckles as well..
EASY TO USE : Ring spacer stay Well on rings and Feel Nothing on your ring and finger when used. Depend on your needs to Cut and fit your rings..

Check Stock

Newsfana Aluminum spacers Skates 8-Pack Spacers for 6mm Axles Spacers (Silver)

Inline Skate Bearing Spacers Material: Aluminum alloy, galvanized speed ring iron is specially molded into a dragon size.The gaskets are machined from high quality aluminum and meet specific standards. Aluminum Spacers This minimizes resistance to the bearings, and the sturdy aluminum construction eliminates the head and is more durable than other plastics! Skate bearing High quality, guaranteed service life!.
Aluminum Spacers This stepped gasket is suitable for conventional: Inline Aluminum Spacer aluminum shaft outer diameter: 7.9 mm inner diameter: 6.3 mm length: 23.5MM Size: 6.3MM X 7.9MM X 23.5MM. The bearing is located in the recessed part of the gasket and is provided with the wheel. Stepped Spacer Seamless integration. ( Package: 8 pack ).
Bearing Skate accessories Suitable for all standard size wheels, standard size 8mm bearings and standard size 6mm axles for standard size wheels and bearings. 6mm Axle Aluminum This minimizes resistance to bearings. The robust aluminum construction eliminates head and ratio Other plastics are more durable. Skate Wheel Bearing Installation: Place one bearing in the wheel. Install the gasket into the bearing in the wheel and insert the other bearing into the other side of the wheel..

Check Stock

Ring Size Adjuster for Loose Rings (6 Packs), Rings Sizers Spacers or Spiral Tightener, 4-Sizes Fitter, Resizer, Ring Smaller Adjuster Connector

Material quality: PU material. The bottom width of the ring: 1.2mm/2mm/3mm/5mm or above. Never have to worry about scratching your ring. The ring guards for women loose rings are too soft to be noticed..
Perfect solution: The innovative design based on spiral loading provides durable adhesion for most rings. Easily around the back of any ring belt. The ring spacer is suitable for rings within 7mm (0.3in) (not suitable for rings more than 7mm or 0.3in)..
Size: 10cm/4 inch for each. Each item can be divided into 7-10 pieces. Rotating loading,The ring guards no adhesives, chemicals or fasteners..
Easy to clean: Easily wipe off the dirt and oil. Prevent water conservation and accumulation of pollutants. More comfortable than other size controller..
Easy to use: Has the advantages of wear resistance, oil resistance, transparency and elasticity. It is easy to use, and it will not fall off whenever the ring is dropped..

Check Stock

Povihome 10 Pack Toe Spacers Separators, Bunion Corrector Gel Orthotics (1/2'' Thick) for Bunion, Overlapping Toes - L Size

Design for Bunion Toe Separate: Gel toe separators work as a spacer to separate overlapping toe, correct bunion issue without surgery. It will separate and realign toe gently because it has enough spacers to do separate. Relieve bunion pain and foot pressure..
Stay in Place design: Flanged silicone separators is like a ring around your second toe to provide space between you second and big toe which make it stays firmly on toes..
Large Size Fit for: Women: US Shoe Sizes 6-12 / Men: US Shoe Sizes 6-11..
Updated Soft Material: Flanged toe spacer is made of super soft & stretchy grade silicone which is comfortable to fit on toes. You will even forget you are wearing it..
Package: 5 Pairs / 10 Pcs toe spacers with nice package, great for the value..

Check Stock

Menocady Pack of 12 Gel Toe Separator, (1/4' Thick) Big Toe Spacers, Single Loop Toe Spreader for Bunions, Overlapping Toe, Corrector and Spacer (Clear)

Bunion Toes Apart: The presence of a bunion toe can cause the big toe to slowly tilt inward, and long-term pressure on the big toe can be painful. A bunion spacer as a spacer to gently separate and realign the big toe and achieving relief of bunion pain and foot pressure..
Effective Pain Relief: Gel toe spacers are suitable for relieving pain and irritation caused by pressure between the toes due to bunions and avoiding secondary injuries such as toe drifting, overlapping toes, blisters, corns of adjacent toes..
Stay in Place: The single loop toe separator consists of a toe spacer and a single loop, which can be attached to the second toe to realize the connection between the toe and the separator so as to stay in place..
Soft and Comfortable: Toe separators made of soft and durable silicone, latex-free, washable and reusable gel toe spacers can be comfortably worn in shoes, allowing you to stand or walk in comfort for longer periods of time..
Easy to Use: Simply put the ring of the gel toe separator on the second toe and position the gel pad between the big toe and the second toe. The strongly supportive gel cushion will keep the big toe in place and prevent it from overlapping and rubbing against the second toe..

Check Stock

Sundown Audio SA-15 Classic D2 15 750 Watts Dual 2-Ohm SA Series Subwoofer

Cutout Diameter: 14 1/8" | Mounting Depth: 7 1/2" | Overall Diameter w/ Gasket: 15 5/8" | Displacement: 0.17ft^3.
Recommended Box Specs (Sealed): 2.5ft^3 (Yields F3 of 41Hz) | Recommended Box Specs (Ported): 3.5ft^3 (Tune to 35Hz, Yields F3 of 28Hz).
19.0mm X‐Max by 70% BL method one‐way (38.0mm peak to peak) | Thick black anodized aluminum voice coil formers for maximum strength and heat....
Custom tooled triple joint support ring | Custom tooled frame spacer / ventilation ring | High efficiency air‐flow management integrated into the....

Check Stock

Home Right C800798 Roller Tune-Up Kit, Multicolor, 7 inches

HOMERIGHT PAINT ROLLER COVER: The Tune-up kit is everything you need to make your Home Right Paint Stick and Paint Stick EZ-Twist like new. Includes parts to rebuild piston and valve body with roller cover end caps and foam spacer..
EASY PAINT ROLLER: The new and improved Paint Stick EZ-Twist is the perfect upgrade to the original Paint Stick. Painting a room can be daunting, but the EZ-Twist easily allows you to paint and reduces the stress of painting your home.
PAINT ROLLER KIT COMES WITH: Includes inner end cap, foam spacer, outer end cap, outer snap cap, end cap sealant strip, Paint Stick EZ-Twist outer end cap, Paint Stick piston O-rings, Paint Stick EZ-twist piston quad-rings, duck valve, foam wiper, retainer ring and petroleum jelly.
: The Paint roller tune up kit with 2 years limited.
BEST PAINT ROLLER: With extended reach and more control, the EZ-Twist allows you to easily paint those hard-to-reach areas in your home such as stairways, hallways, and more.

Check Stock

MMOBIEL 22 Pcs Clock Movement Mechanism Replacement Kit High Torque DIY Wall Clock Making Hands and Motor Kit with 2 Motors and 12 Hands 25mm / 1 inch Shaft

...shaft length is approx 25 mm/1.0 inch. The thread length is 20 mm/0.79inch, suitable for 13-18 mm/0.51-0.71 inch thickness of a clock panel. Jump Second movement is suitable for 1 - 3 mm/0.04 - 0.12 inch thickness of clock panel. Simply install a Clock panel by your liking over the shaft and secure it with the spacer and the lock ring..
Super Silent, no annoying ticking, providing a lovely quiet and comfortable environment to sleep, study, or work in. The motors are “CE” & ”RoHS” Certified. Use to repair a broken clock or create a frameless draw clock. The motor has a brass shaft that is 25mm in length and a 15mm clock base great to install on a clock panel like Three dimensional embroidery, Craft Clock, Frame Less Draw Clock, etc..
Set Contains: 2x High Torque Clock Motor AA-Battery Powered (not included) with a 25mm / 1 inch Shaft, 5 Different Hand Styles for Minutes and Hours, 3 Different Color and Sizes Second Hands, 2x Second Cap, 2x Hooks, 2x Rubber Ring, 2x Spacer, 2x Lock ring to keep everything in place. The Hands are protected with a thin foiled layer, that protects against scratches during installment. Please remove the foil when the clock is installed..
High quality product by MMOBIEL: Each part is tested before shipm....

Check Stock

1PC Back Spacer Signet Ring For Spyderco Delica 4 Knives US NEW

1PC Back Spacer Signet Ring For Spyderco Delica 4 Knives US NEW.

Check Stock

Yukon Gear & Axle (YGLD44-4-30) Dana 44 Grizzly Locker replacement

This unit will not work with early tapered axle designs that used an axle spacer button. This unit is drilled for 7/16" ring gear bolts.

Check Stock