ReviewsSpade Bit And Hole Saw Set

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

  • This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
  • This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
  • The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..
Check Stock

Toolly Concrete Hole Saw Kit, 30mm 40mm 60mm Tungsten Steel SDS Plus Shank Wall Hole Cutter Cement Stone Drill Bit Set with 220mm Connecting Rod for Cement Wall Masonry Foam Brick

  • 【Professional Hole Saw Kit】This concrete hole saw kit provides you with 3 concrete hole saw bits.
  • 1 x allen wrench, allows you to quickly drill the cleaning holes and meet your professional needs..
  • 【Product Size】3Pcs concrete hole saw: 1-2 / 11 inches (30mm), 1-3 / 5 inches (40mm), 2-9 / 25 inches (60mm). 1 SDS connecting rod 8-7/10 inches (220 mm). 3 center drill bits 4-1/3 (110mm)..
  • 【Long SDS plus shank】The hole saw drill bit set comes with a SDS Plus shank, and the male thread adapter design tightly matches your drill chuck and greatly increase the drilling speed..
  • 【Premium Material】Cement stone drill bit set is made of high quality tungsten steel and alloy, very sturdy & durable, simple to operate, easy to use and fast perforation, adopts high-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth in long service life..
  • 【Widely Used】The masonry hole saw kit can easily drill through the most common wall materials (earth embryo, foam brick, cement wall, masonry wall, red brick). At the same time, it can also be used for AC tubing, water pipes, exhaust hoses , Air conditioning drilling operations, etc..
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock

DEWALT SDS Max to SDS+ Adapter DW5891

  • 4-in-ONE: This ZELCAN drill bit set provides a 4.4" pilot drill and three diameters of hole saws (30 mm or 1.2 in., 50 mm or 2 in., 65 mm or 2.6 in.)....
  • FITS SDS PLUS HAMMER DRILLS: The custom shank on the connecting rod works with SDS Plus tools by all major manufacturers (Bosch, DeWalt, Hiltex,....
  • DURABLE MATERIALS: Made of high-quality 40Cr steel and tungsten alloy, this hole saw drill bit set will give you years of service even under punishing....
  • WIDE APPLICATION: This masonry hole saw kit easily drills through most common wall materials (brick, adobe, concrete, cement, and stone) to let you....
  • SATISFACTION GUARANTEED: We offer ZELCAN's usual strong warranty and friendly 24/7 customer service so you can order worry free and start improving....
Check Stock

Koopi 1-Inch / 25mm BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

  • This 1" Hole Saw Drill Bit is designed for wood / plastic cutting..
  • Arbor shank diamater- 3/8 in (fit for all 1/2"&3/8" drill).
  • Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
  • This 1 in hole saw made of M42 BI-Metal and High Speed steel, Durable and cuts clear.
  • Pakage Include: 1 x 1" hole saw (hole saw and arbor are integrated design).
Check Stock

12 Pcs Diamond Drill Bits for Ceramic, Diamond Hole Saw Drill Bit Set Kit, Premium Glass Drill Bit for Bottles, Pots, Marble, Granite Stone, Tile Cutting 0.16 Inch - 1.18 Inch(4 mm - 30 mm)YLYL

  • 12 PCS DIAMOND HOLE SAW DRILL BIT SET INCLUDES: 0.16“/4mm(2pcs), 0.23“/6mm, 0.31“/8mm, 0.39“/10mm, 0.47”/12mm, 0.55“/14mm, 0.62”/16mm, 0.7“/18mm, 0.78”/20mm, 0.86”/22mm, 1.18“/30mm. The different sizes glass cutting drill bit to meet you various demands!.
  • SUPER MATERIAL: Glass drill bit for bottles are made of industrial grade carbon steel, sharp, fine workmanship and super wear-resistant, extended service life. Glass cutting drill bit are high quality and good performance that excellent for making clean and accurate hole..
  • WIDE USAGE: Diamond hole saw drill bit set kit removes a complete circle from glass, marble, tiles, granite, ceramic or other. Perfect for drilling glass, porcelain tile, granite, bottles, wood, blocks jars, ceramic marble and and other hard surfaces etc..
  • DIAMOND DRILL BITS FOR CERAMIC TIP: When you using the diamond hole saw, please use iubrication (water), iubrication will extend drill bits life..
  • SATISFACTION GUARANTEED: Our team is committed to providing every customer with good products and satisfactory service. If there are any probl....
Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

  • 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
  • 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
  • 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
  • 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
  • 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check Stock

EZARC Bi-Metal Hole Saw Kit, 13-piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard

  • 【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
  • 【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
  • 【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
  • 【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
  • 【Complete Hole Saw Set】9pcs M42 Bi-metal hole saw: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm),to meet needs of different situations. 1 x Small Mandrel, 1 x Large Mandrel with Adapter and Pilot Drill Bit. The maximum cutting depth is 1-7/8" (48mm)..
Check Stock

Rannb 90mm/3.5' Hole Saw for Cutting Wood Plywood Laminated PVC Board

  • ⭐【Material】Features heat treated carbon steel alloy hole saw blade, non-binding clean edge design.The blade is sharp with high hardness..
  • ⭐【Dimension】Cutting Dia: 90mm /3.5".
  • ⭐【Application】This Hole Saw Drill Bit is designed for wood / plastic cutting.
  • It can effectively and economically cuts a wide variety of materials including aluminum, iron and wood..
  • ⭐【Convenience】The spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
  • ⭐【Package Content】1pcs x Shank + 1pcs x Hole Saw + 3pcs x Pilot Drill Bit + 1pcs x Small L Wrench.
Check Stock

wesleydrill Spade Drill Bit Set Paddle Flat Bits 6 Pcs 3/8 -1 Flat Wood Hole Cutter Fit for Most Types of Wood as Well as Fiberglass

  • [Specifications and packaging]: 6 Piece flat wood spade drill bit set.Include size:3/8",5/8",1/2",3/4",7/8",1"..
  • [Function]: Woodworking paddle flat bits allow accurate drilling of most types of wood as well as fiberglass, PVC..
  • [Material]: The wood bit set is made of carbon steel construction with titanium coating..
  • [Advantage]: Triangle woodworking drill bit to drill titanium plating surface, service life can be extended 3-10 times. The chip removal groove design ensures the smooth and clean hole..
  • [Quick Replacement, Easy Installation]: Spade drill bits 1/4 inch hex shank fits into all power tools more easily and securely, especially for locking into quick change chuck. It's universal for the most drill driver tool of brands in the markets..
Check Stock

3-5/8 ,3-1/4,1-1/4 Inch HSS Bi Metal Hole Saw Kit for Wood, Drywall, Metal

  • This hole saw kit includes 3pcs of 3-5/5”((92mm), 3-1/4” (83mm),1-1/4”(32mm) hole saw, 1pcs of 0.34”(8.6mm) hex shank mandrel , 2pcs of silver colour Ø 1/4” (6.35mm) x 3.5" (89mm) HSS pilot drill Bit for wood and soft metal, 1pcs of black colour Ø 1/4” (6.35mm) x 3.5" (89mm) HSS pilot drill Bit for hard metal. Max cutting depth: 1-1/2”(38mm).
  • Ideal for Wood, PVC, Drywall, Aluminum, Metal, Stainless Steel. Special kit utilizes alignment window and taller bushings to deliver accurate height placement and straight drilling with the hole saw set..
  • Bi-metal strip is made by laser welding machine and vacuum heat treatment, providing better hardness, strength, and longer life..
  • 100% Satisfaction Guarantee: If you are not satisfied, Free return..
Check Stock