ReviewsSpeaker To Line Level Converter

Recreational Watts Polaris Ride Command 7'' Display Add-On Amplifier Harness - Female or Male RCA Ends - Plugs into Factory Wiring Harness. Easily add an External Amplifier (Male and Female RCA Ends)

Two channel adjustable speaker cable to RCA line output converter.
Use the LDL2 when adding an amplifier to a factory radio to convert the radio’s speaker level output to the low amplifier(RCA) level input.
Utilize audio transformer for noise isolation.
Split pin RCA connector with pure Oxygen Free Copper wire.

Check Stock

NVX XCR1 Dash Mount Wired Remote Level Bass Control Knob for Select NVX and AudioControl Sound Processors

2-Channel Premium Line-Out Converter with BassLift Technology.
Full-Range Main Output (Speaker) and Low-Pass Bass Output (Subwoofer).
“BassLift” Technology Restores/Compensates For Factory Bass Roll-Off.
Converts High-Level Signal Used To Play Factory Speakers Into Low-Level RCA Input.
Includes 34-Page Product Manual w/ Step-By-Step Installation Instructions.

Check Stock

PAC RP4-CH11 All-in-one Radio Replacement and Steering Wheel Control Interface For select Chrysler vehicles with CAN Bus -by-PAC

PRO Series 2-Channel High Power Line Output Converter.
Designed to optimize audio levels between radio and amplifier to achieve the best audio quality.
Ideal for use when adding an amplifier to an OEM system.
Configurable for speaker level or RCA level input/output.
Single dial, precision matched stereo, level gain adjustment.

Check Stock

NVX NDA501 980 Watt RMS N-Series Class D Bridgeable 5-Channel Amplifier CEA-2006 Compliant with Bass Remote Knob

Adjustable xBOOST corrects for bass roll-off.

Check Stock

Pyle Car Stereo Wiring Kit - Audio Amplifier & Subwoofer Speaker Installation Cables (4 Gauge), Blue (PLAM40) & PAC SNI-35 Variable LOC Line Out Converter

Product 1: CAR AUDIO WIRING: Universal car stereo audio system cable and wire kit. Includes all necessary pieces to set up your amplifier and subwoofer speakers.
Product 1: INCLUDED AUDIO CABLES: 20’ ft. 4 gauge red power wire, 4’ ft. 4 gauge black ground wire, 20’ ft. 16 gauge blue remote turn-on, 20’ ft. 12 gauge stereo speaker wire.
Product 1: MORE AUDIO CONNECTION: 20’ ft. stereo RCA audio cable, 6’ ft. black split loom cable conduit - enables connection for amplifier and subwoofer speakers.
Product 1: CAR STEREO SOUND: Also includes (2) ring terminals 8G, (2) spade terminals: 8G, (5) spade terminals: 14-16G, (3) butt connector, (20) cable ties, (1) black grommet.
Product 2: Adjustable Line Output Converter.
Product 2: Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input.
Product 2: Utilize Audio Transformer for Noise Isolation.

Check Stock

MTX Audio TNP212D2 Terminator Power Pack Subwoofer System - Set of 2,Black & PAC SNI-35 Variable LOC Line Out Converter

Product 1: Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier.
Product 1: TNA251 amplifier delivers 250 watts x 1 at 2 ohms.
Product 1: Variable low- and high-pass filters offer 40Hz–400Hz range for sound shaping.
Product 1: TNE212D2 enclosure features dual 12-inch Terminator subwoofers with 1200 watts max power.
Product 2: Adjustable Line Output Converter.
Product 2: Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input.
Product 2: Utilize Audio Transformer for Noise Isolation.

Check Stock

OEMTOOLS 24760 40 Watt Soldering Iron with Metal Stand, Green and Black, Automotive Solder Iron with Pencil Tip Soldering Iron Attachment

Functions: Car stereo radio converter, advanced line output converter. Convert the car speaker wire into a preamplifier output..
How to Work: The unit has a built in relay, when your stock stereo sends sound to the speakers, this device converts the speaker signal to RCA jacks for your amplifer and at the same time, it feeds 12 volts to your turn on of your amplifier that it takes from the power side of the amp..
Reliable to Use: You can ground the power cord and connect it to the amplifier as usual, then connect it to the power supply and power on the amplifier! The figure is included in the unit..
Excellent Quality: The converter adopts sturdy and durable plastic and metal materials, and the gold-plated RCA soldering iron tip can realize reliable signal transmission..
Easy to install: Auto Radio Converter is compact in design, plug and play, and the wiring diagram is attached to the bottom of the device to make installation more convenient..

Check Stock

SAMSON XP106WDE 6' Portable Rechargeable Bluetooth Powered PA DJ Speaker+Headset Bundle with Samson LS40 Speaker Stand w/Locking Clamps For Expedition XP106, XP106w Speakers

Internal rechargeable battery for up to 20 hours of continuous use. Bluetooth connectivity to connect wireless music sources. Includes XPD1 Headset USB Digital Wireless System with beltpack transmitter and headset microphone (100' operating range). 2-way speaker enclosure with 6" woofer. 1" high frequency driver. Class D amplifier produces 100 watts of power. 4-channel mixer.
XLR-1/4" combo input for microphones and other line level devices. 1/4" input for guitars and other line level devices. 1/8" stereo Aux input for stereo line level devices (MP3 players, keyboards, etc.). Line output to cascade multiple systems together. Music/Speech switch for optimizing output EQ for speech or music playback. USB Wireless port. Battery level LED indicator. Integrated carry handle.
1 3/8" speaker stand mount. Features: Samson LS40 Speaker Stand w/Locking Clamps For Expedition XP106, XP106w Speakers. Lightweight, telescoping speaker stand with tripod base. Ideal for use with Samson Expedition Rechargeable Portable PAs (Escape, Express, XP106, XP106w). Roadworthy steel construction. Sleek black finish. Adjustable up to 4.75' in height.
Standard 1 3/8" pole adapter fits virtually any PA speaker. 44lb (20kg) of handling capacity. Locking latch for increased support.

Check Stock

Acoustic Audio by Goldwood AA15LBS Powered 15" Bluetooth LED Light Display Speaker with Microphone and Stand

Acoustic Audio AA15LBS active 15″ Bluetooth LED speaker with wired mic and stand, 1000W system power, 20hz-20 kHz, 102Db, 2-way design, deluxe 15″ woofer with 2″ tweeter, built in Bluetooth receiver.
USB/SD Reader MP3 player, wired microphone with cable, multiple pattern flashing LED light woofer with off switch, FM, remote control for MP3 player, Graphic equalizer, ported for added bass.
Female XLR input for wired mic with level control, Female 1/4″ jack input for wired mic with level control, RCA line inputs, RCA line outputs, 3.5mm input, line/MP3 level, echo and Master controls.
Rugged cabinet with rear wheels and handles, adjustable pole mount, size is (H x W x D) 27″ x 16″ x 14″, speaker stand has safety lock pin and rubber feet, power cable and full instructions included.
Use for DJ speaker, pa speaker, Karaoke speaker, live sound speaker, fixed installation speaker, studio monitor, home Audio, This Listing and price is for 1 acoustic Audio active speaker.Impedance:4 Ohm.

Check Stock

Rockville Rock Shaker 10\ Inch Black 600w Powered Home Theater Subwoofer Sub

...e woofer with foam surround and paper cone, Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire resistant poly cotton, Detachable foam grill.
Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High level inputs, Speaker High level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included.
Specifications: Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1003c1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz - 200 Hz, 600 Watts peak output, 300 Watts RMS output, Voltage: 110-240V, Product Dimensions in Inches: (W*H*D): 12.6'' x 15.5'' x 16.5'', Shipping Dimensions in Inches: (W*H*D): 15.7" x 19.7'' x 18.5'', Unit Weight: 20 LBS, Shipping Weight: 24.5 LBS, Color: Black.
Rear side of the subwoofer: Subwoofer (LINE) Jack in, Subwoofer (LINE) Jack out, Volume Control, Phase switch (0° - 180°), Frequency control, Power switch, Speaker high level in, Speaker high level out??.

Check Stock

Rockville Rock Shaker 10\\\ Inch Wood 600w Powered Home Theater Subwoofer Sub, Rock Shaker 10 Wood

...e woofer with foam surround and paper cone, Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire resistant poly cotton, Detachable foam grill.
Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High level inputs, Speaker High level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included.
Specifications: Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1003c1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz - 200 Hz, 600 Watts peak output, 300 Watts RMS output, Voltage: 110-240V, Product Dimensions in Inches: (WxHxD): 12.6'' x 15.5'' x 16.5'', Shipping Dimensions in Inches: (WxHxD): 15.7" x 19.7'' x 18.5'', Unit Weight: 20 LBS, Shipping Weight: 24.5 LBS, Color: Classic Wood.
Rear side of the subwoofer: Subwoofer (LINE) Jack in, Subwoofer (LINE) Jack out, Volume Control, Phase switch (0° - 180°), Frequency control, Power switch, Speaker high level in, Speaker high level out.

Check Stock