ReviewsSpecial Botls screws

60 Pieces Stainless Steel Belt Buckle Screws Tip Screws Leather Replacement Accessories Wrench with Drill Bit

  • Stainless steel tip screws for belt buckle sets are sturdy and rust free..
  • Stainless steel tip screws size (diameter x length): Approx, 7/64 x15/64inch..
  • Equipped with stainless steel screw wrench and special drilling bit for screws..
  • NOTE：Please accurately measure the size of the screws you need to repair. You can also re-drill and replace these stainless steel screws with the drill bit that comes with this screw..
  • Stainless steel pointed screws can be used to repair belts, wallets, toys, watches and watch straps, etc..
Check Stock

Eureka U Extended Life Belt (Set of 2)

  • ...Not Compatible with Bissell model 1413, 1797, 1816, 1831, 1981, 2112, 3576, 61C5, 6584, 6585, 9595, 9595A, 23T7T, 35831, 68C71, 98NA1, 23T7-V, 68C7-U. Not compable with Part Number #1604895. The perimeter of vacuum belt is 14.72 inches. Please check the length of the belt from your own machine before purchasing..
  • 【Special Rubber】 Our vacuum cleaner belt is made of special rubber, so it has long service life. There are special lines on the surface to increase the friction of the belt. Keep your vacuum running smoothly. Our factory use original vacuums to make molds, making belts perfectly compatible with vacuums..
  • 【Installation Method】Using a Philips head screw driver remove the screws and lift off the brush plate. Remove the roller and the old belt. Attach the new belt to the motor pulley and the roller. With belt in place, push and slide roller into the unit, make sure the roller is in the correct place. Reposition the brush plate and screw in the screws. Note: If the belt is too tight to install, please stop the installation..
  • 【Replace Belts】Replace your vacuum cleaner belts every 3 to 6 months to ensure optimum performance of your vacuum cleaner. Due to frequent use, the belt will wear and eventually break. So it is recommended to check a....
Check Stock

KSaAuto H7 AM/FM Radio Antenna for Harley Davidson Road Street Electra Tour Glide (20 Types Optional) 7 Inch Polished, Copper Core & Screw, Flexible Rubber, Motorcycle Antenna

  • 【FITMENT】 Fit for all 1998-2022 Harley Davidson. (Road Glide / Street Glide / Tour Glide / Electra Glide / Ultra Classic / Trike etc.).
  • 【SPECIAL DESIGN】 Designed more than 20 different styles of antennas for Harley. Don't put up with boring factory antennas or corny antennas. Show off your personality now!.
  • 【SPECIAL MATERIALS】 Copper Core & Screw ✔ Reduce Signal Loss ✔ Enhance Signal Reception ✔ Better AM/FM Radio ✔ Improve Sound Quality & Anti-interference Ability ✔ First Grade TPU Rubber ✔ High Resilience ✔ Bend At Will ✔ Never Crack or Fade ✔.
  • 【PLUG & PLAY】 Same as the factory screw, but replaced with copper to improve the signal. Unscrew the original antenna, then screw on ours! Your Harley will get a special look right away！.
  • 【3-YEAR WARRANTY】 Any dissatisfaction can be returned within 1 month. Any quality problem can be exchanged within 3 years. There is no 100% product, but 100% KSaAuto service! Just ask us any questions!.
Check Stock

TAG Heuer Formula 1 Gulf Racing Special Edition Watch - CAZ101N.FC8243

  • Gulf Racing Special Edition Watch Featuring The Bright Colors of Gulf Racing.
  • Small Seconds, Tachymeter Scale, Chronograph, End of Life Indicator (EOL), Screw-down Crown and Fixed Bezel.
  • Stainless Steel Case on Blue Calf Skin Leather Strap with Asphalt Texture, Case Diameter: 43mm.
  • Stainless Steel Screw-down Case Back with GULF Logo Special Engraving.
  • Battery Operated Quartz Movement, 200 Meters / 660 Feet Water-Resistant.
Check Stock

vidaXL Robotic Lawn Mower Garage 28.3\x34.3\x19.7\ Red and White Firwood

  • 【Life time】 Double Sided Blade! When one side gets dull, flip it around then use other side! 2 times lifetime !.
  • 【Special process 】Titanium carbide coating are 100% break-proof thanks to a special hardening process.good wear resistance and durability..
  • 【INSTALL】 Make sure the battery taken out ,put on gloves for safety, unscrew the old blade and switch it out screw, then screw the new blades and screws back in..
  • 【Work well】The blades work well with Robotic Mowers . As a manufacturer in the field of garden technology, we specialize in spare parts and accessories for robotic lawn mowers!.
  • 【Security】Thanks to the good quality material, these blades are enduranced. Even if the blade encounters resistance (stones or similar) -safe storage box of extra blades when not in use. ideal for the safety of animals and children!.
Check Stock

Uncle Mike's Quick Detachable Fore End Band Style Sling Swivels (Blued, 1-Inch Loop) , BLACK

  • Special machine screw base for mounting on tube magazine lever action rifles, carbines with fore-end band and Mossberg 500 shotguns.
  • Special machine screw base for mounting in tube magazine lever action rifles, carbines with fore-end band.
  • Closed Link technology creates a permanent ring bond.
Check Stock

ENGINEER PZ-58 Screw Removal Pliers Extractor Pliers (Combination Pliers), with unique non-slip jaws for quickly removal of damaged or rusted fasteners

  • Squeeze and turn crushed screws, rusted screws, fixed screws, special screws, etc.
  • [Backing] Can also be used for removing gas cans, sorting soy sauce bottles and plastic bottles.
  • International patented tip shape allows for low head screws (truss screws).
  • It has a blade so it can also be cut through wires.
  • Adopts an elastomer soft grip that is environmentally friendly and hand friendly.
  • T-shaped grip section, lighter and more resistant to twisting.
  • [Approximate Screw Removable] Tip job: Screw head diameter 0.1 - 0.4 inch (3 - 9.5 mm) (truss screw: M2 - 4 / Pan screw: M1.6 - 5) / Body jaw part: Screw head diameter 0.2 - 0.4 inch (5.5 - 10 mm) (pan screw: M3 - 5).
  • Product Specifications: Size: 6.3 x 2.1 x 0.6 inches (160 x 54 x 15 mm).
  • Cutting Capacity: Copper wire Φ0.05 inches (1.2 mm).
  • Uses: For maintenance of cars, motorcycles, equipment, bicycles, radio controls, etc.
Check Stock

Cruiser Accessories 81200 Locking Fasteners License Plate Frame Hardware, Standard-Stainless Star Pin

  • The standard locking stainless Star Pin fasteners are designed uniquely to deter the removal of any license plate frame from a vehicle.
  • The design of these fasteners with the star center makes it impossible to remove screws without the special Star Pin key, keep the key for future use.
  • Designed to fit all novelty/license plates for domestic vehicles.
  • Includes four (4) 1/4 x 3/4 inch (6.35 mm x 19.05 mm) fasteners, four (4) plastic nut grommets and one (1) special Star Pin key for installation.
  • User friendly and easy to install, see back of package for installation instructions.
  • The combination of the pin in the center with the special Star Pin key makes it impossible to remove the screws with a typical allen wrench.
  • These fasteners are made of stainless steel.
  • Designed to fit all standard novelty/license plates.
  • Easy to install (illustrations on back of package).
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (50 pcs)

  • 【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
  • 【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
  • 【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
  • 【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
  • 【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..
Check Stock

VOKUL Scooter Stand Parking Kick Scooter Holder Stand fit Most Scooters for 95mm -125mm Scooter Wheels - Multiple Scooters, Stable Base,Organize Scooters, Works Perfect

  • ...d that will offer you a best solution for the probelm you encounted..
  • ✅ INSTALL EASILY AT VARIOUS PLACES: Use immediately when out of the box and you can take the scooter stand in your floor,gargage or yard and collect all your scooters to hold upright and let the place become neatly immediately.or you can use the botls to fasten the stand in plank or concrete so make the scooter stand can hold more capacity..
  • ✅ PRACTICAL CONSTRUCTIONS: The two wheel scooter stand is durable enough with competitive price on scooter storage market that can holde up your pro or kick scooter,Old design with 0.28lbs + 8.6"L x 3.9"W x 2.4" H New design with 0.37lbs + 10"L x 5.5"W x 2.4" H.both design side have 3 holes if you want to fasten them..
  • ✅ DIY YOUR KIDS "SCOOTER PARKING": You can buy more to help your kid DIY their"scooter parking" If your kid have many scooters need to upright rather than laying anywhere again. (Note:If you want to replace a new scooter you can choose vokul as Vokul have many models pro scooter available,Thank you!).
Check Stock

DECONET Bat House for All Seasons (Modern Design) - Double Chamber Outdoor Ceder Bat Box Shelter - Bats Manage Your Yard by Exterminating Harmful Insects

  • Special Exterior Design: Decorate your yard and house. We designed this to look like a decoration inspired by beautiful sculptures. People would feel special about the design of Deconet bat house..
  • Interior Design for Bats: NEW Ventilation Thermal design help bats to settle in. We can provide 2 different chambers, cool&refreshing and warm&cozy. So bats can build a nest in all climate environment. You can see bats roosting in no time..
  • Support Ecosystem: Deconet bat house will change the natural environment around you. Bats play a role in transferring pollen and seeds from the ecosystem. So your surroundings would be a beautiful place. Durable cedar wood bat house make nature-friendly environment every year..
  • FREE from Annoying Mosquitoes and Pests: Bats clear out your yards at night, eating as many pests and mosquitoes as bats' weight. There is nothing more annoying about pest management. Hire bat friends for free and just enjoy your grass and flowers..
  • EASY Installation and Neat Hole Without Screw Protrusion - We make even the smallest details meticulous. The screws used to install the product often hurt bats. However, Deconet designed screw holes so that the screws do not protrude to prevent bats from getting hurt. The bracket is also pre-assembled on ....
Check Stock