ReviewsSpecial Camera Module

2 Sets for Raspberry PI Camera 1080P Webcam 5MP OV5647 Sensor Day and Night Vision IR-Cut Video Camera Focus Adjustment for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Camera

  • Nice performance: the IR-Cut video camera not only supports shooting 2592 x 1944 pixel static image but also supports recording [email protected], [email protected] and 640 x 480p 60/90 video.
  • Featuring with 1080P 5MP OV5647 webcam sensor, 5 megapixels and adjustable focal length.
  • IR-CUT camera: the camera module has day mode and night mode, it can switch automatically between the 2 modes according to the change of light, which helps you to avoide image deviation and get clearer images during the day and night.
  • CMOS sensor interface: the camera module adopts appropriative CMOS sensor interface (CSI), via the CSI bus.
  • A higher bandwidth link that transmits 5 megapixels data from the camera back to the processor.
  • Compatibility: these infrared night vision camera modules are compatible with Raspberry Pi 4/ 3/ 2/ 1 model B/ B +/ a + (except Pi Zero/ Zero W).
  • Infrared fill light: equipped with 2 infrared fill lights, so the camera module allows you to take pictures at night and you don't have to worry about the light.
  • The brightness of infrared light will adjust automatically based on the dark of the circumstances.
Check Stock

XTOOL D9 Automotive Diagnostic Scan Tool with 3 Years Updates($900 Value), 2023 Newest, CAN FD & DoIP, Topology Mapping, 42+ Services, ECU Coding, Bi-Directional Control, All Systems Diagnostics

  • 【Smart Diagnostic System】XTOOL D9 is a 2023 new released 9.7” smart diagnostic tool featured OE level all systems diagnostics, Module Topology Mapping, full bi-directional controls, 35+ special functions, ECU coding capabilities, support CAN FD/DoIP/RP1210/OBDII protocol vehicles, comes with Complete Connector Kit and can work with key programmers, inspection camera to extent capabilities. NOTE: Please reach us with VIN # via xtoolofficial @ hot mail c om to check compatibility before purchase!.
  • 【Module Topology Mapping】XTOOL D9 intelligent diagnostic computer comes with Module Topology Mapping that displays interrelationships among various vehicle modules and views faulty modules in one glance to reduce guesswork performing all systems scan and improve diagnostic efficiency by 60% for automotive technicians, mechanics, car dealers and advanced DIY mechanics. NOTE: Software already released for GM, for Ford, for Toyota, for Honda, for Nissan, for Mazda and for BMW. More to come..
  • 【ECU Coding + Programming】XTOOL D9 ECU Programming & Coding tool can perform Offline Programming on Ford, Lincoln, Mazda vehicles, to update ECU software/firmware, program....
Check Stock

Varifocal Lens USB Webcam Mini Camera 2.8-12mm Webcamera usb Sony IMX322 USB with Camera,2 MP Full HD 1080P USB Webcam Support 1920x1080@30fps,High Speed USB2.0 Camera Support Most OS/UVC/H.264/Micro

  • High Qualiy Image Sensor:Plug-&-Play (UVC compliant),USB2.0 camera module with 3 meter USB2.0 cable. Embedded with 1/2.9 Sony Imx322 image sensor for better picture performance.2 megapixel low illumination 0.01LUX webcamera usb USBFHD06H Serials use top sensor Sony IMX322 which is the high standard in terms of image quality and sensitivity performance.The Sony IMX322 image sensor helps to produce sharp images effectively. Compression Format:H.264/YUY2/MJPEG optional..
  • USB2.0 High Speed/USB2.0 OTG: USB Connecting port in this camera module support high speed usb 2.0 data transmission,occupy less bandwidth,greatly improved the working efficiency..
  • Max. Resolution:1920(H)X1080(V):High Definition 1920x1080 MJPEG/[email protected]/,2.8-12mm varifocal lens usb camera with IR-cut [email protected] for true color day images/videos (Does not work with 850nm IR illumination),focus adjustable,Webcamera usb module with 2 megapixel high pixel technology for sharp image and accurate color reproduction.This usb with cameras can meet most clarity requirements for different application..
  • Lower Color Reproduction Deviation(Mini Illumination:0.01LUX):USB camera module with High definition and lower Color reproduction deviation produce sharp image and acc....
Check Stock

Zyyini Mini Camera Board, Picture Board with Ribbon, Manual Focusing, for Home

  • 1080P high resolution camera module, bring pure and delicate picture quality experience and the image is clearer..
  • Using high‑definition GC2035 photosensitive chip, strong stability, giving you a good visual experience..
  • Free drive camera module with highest resolution 1600 x 1200, 30 FPS frame rate..
  • With a 60 degree field of view, a wide field of view, support for Orange Pi system..
  • Manual focusing camera, can be directly used in a variety of industry products..
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

8 Pieces Camera Compatible with Raspberry Pi Module with 15 Pin Ribbon Cable and Flex Extension Cable Set Compatible with Raspberry Pi Model A B B+, Pi 2 and Raspberry Pi 3, 3 B+, Pi 4

  • Focus lens: OV5647 Pi camera sensor has a fixed-focus lens, which can capture clear and beautiful images quickly and easily, helping you keep happy moments and save unforgettable memories.
  • CSI interface: 5-megapixel camera module uses a dedicated CSI interface, so the higher bandwidth ink that carries pixel data from the camera back to the processor via the CSI bus, interface carries pixel data from the camera back to the processor, BY THE WAY with pi zero ribbon cable can be applied on zero board perfect.
  • Resolution parameter: 2592 x 1944 Pixel Static Images, 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,5 megapixel sensor OV5647, and its video resolution is 1080p, which is clear enough for you to use.
  • This is a practical design for you to take some beautiful photos of your family.
  • Flex extension cable set: whatever for 3D printer, home security, or other for raspberry pi camera project, this camera cable set can totally meet your requirement.
  • Compatible with all Raspberry Pi board, camera module and display, suitable for octoprint 3D printing monitoring.
  • Wide compatibility: this 5 megapixels camera module is compatible with raspberry pi model A or B, B+, model 2, raspberry pi 3, 3 B+, pi 4, works well with your equipment, bring y....
Check Stock

Blink Outdoor – 5 camera kit with Blink Mini

  • Blink Outdoor is a wireless battery-powered HD security camera that helps you monitor your home day or night with infrared night vision..
  • With long-lasting battery life, Outdoor runs for up to two years on two AA lithium batteries (included)..
  • Store video clips and photos in the cloud with the Blink Subscription Plan and save events locally to the Blink Sync Module 2 via a USB flash drive (sold separately)..
  • Outdoor is built to withstand the elements to help you protect your home inside or out, come rain or shine..
  • Designed so you can set up yourself in minutes. No wiring, no professional installation required..
  • Get motion detection alerts on your phone with the option to customize motion zones in the Blink Home Monitor app so you’re only alerted when you need to be..
  • See, hear, and speak to visitors with live view in real time and two-way audio features on your Blink app..
  • Works with Alexa – use your voice to monitor your home through supported Alexa-enabled devices..
  • Add-on camera requires Blink Sync Module (sold separately)..
  • Includes one Blink Outdoor Add-On camera, Sync Module 2 not included..
Check Stock

SmallRig Protective Case for DJI Action 2 Dual-Screen Combo Camera Housing Case with Magnetic Attachments Case Protector Accessory Grey - 3627

  • 【Designed for DJI Action 2】The camera cover fits the camera perfectly and does not interfere with any functions or buttons, which can protect your....
  • 【Only for DJI Action 2 Dual-Screen Combo】One cage for Action Camera and another cage for Touchscreen Module is included in package. The cage for....
  • 【Keep Magnetic Design】 This cage doesn't interfere with the magnetic design of the camera, allowing you to snap and switch freely between....
  • 【Snap-in Design】Both sides are designed with the same tabs as the camera body, allowing for a more secure connection between the battery module....
  • 【No Blocking of the Interface】All of the camera's ports are retained, such as the charging hole, the sound collection hole and the indicator....
Check Stock

Spy Gear Panosphere 360-Degree Spy Cam

  • The Pan sphere 360 Spy Cam captures it all by recording incredible 360° panoramic video.
  • The Pan sphere has enough storage to take 2000+ HD photos or record 10 minutes of 360° video.
  • The Pan sphere comes with 3 unique attachments for secretly placing the Pan sphere.
  • The Pan sphere 360 Spy Cam is made for Special Ops ages 8+ and charges via USB connection.
  • Includes: 1 Camera Module, 1 Tactical Disk Housing, 1 Arm Band, 1 Suction Cup Bracket, 1 USB Charge/Data Cable, 1 Instruction Sheet.
Check Stock

MELIFE Octoprint Octopi Webcam Mini Camera Video Module 5 Megapixels Monitor 3D Printer with 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi A/B/A+/B+, 2, 3, 3B+

  • 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards..
  • Come with extra 100cm/3.28ft extension cable, long enough for mounting the camera, especially useful when you don¡¯t want to place the camera near the Raspberry Pi..
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement..
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects..
  • Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series and 1 5MP camera module. Cable for Pi zero is not included..
Check Stock

8MP POE IP Camera with IR-Cut POE Network Camera Module BlueFishcam 4K IP Security Board Camera for DIY/Repair/Upgrade (8MP-4K, 3.6mm)

  • 4K Board IP camera module 8MP POE camera network Camera Module with 3.6mm fixed lens for DIY.
  • 1/2.8” Ultral Low-illumination Progressive Scan CMOS, 4K 8MP high resolution3840*2160 @ 20fps..
  • Embedded Web Server, support Internet Explore monitoring, configuration, upgrade, H.265/H.264 high compression , two simultaneous video streams.
  • Package: 1 piece of POE IP board Camera for DIY. It's with POE function, you can use normal power supply,too. Power required: DC 12V 2A.
Check Stock