ReviewsSpecial Gas

Bansbach Easylift Kit with Gas Spring W7W7F46-090-244/335N and Ball Sockets and Brackets 900BA4s AF640-665

AN ALL IN ONE KIT: Our Bansbach Easylift Gas Spring Kit includes hinge eye connectors for tonneau covers, hatches, lid support, and other projects.
HEAVY DUTY AND ULTRA SHOCK ABSORBANT: Our gas springs offer protection against unwanted vibration and light side forces with minimal friction for smooth movement.
BUILT TO LAST: Precision crafted from durable materials, our powder coated cylinders and CeramPro piston rods make our professional grade gas springs resistant to corrosion caused by rust, water, heat, and moisture.
ENDLESS VARIATIONS: We offer a wide range of styles, and our gas spring kits are available with fast, normal, and slow extension speeds and accessories for every project including automotive, industrial, and other applications.
THE BEST IN THE BUSINESS: With over 100 years of experience in production we have evolved into a worldwide premium supplier of gas springs, electric linear actuators, special pneumatics, hydraulic pumps and accessories, and dampers.

Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

...our oil tank mouth size before purchasing..
High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Simple to install,Each set of products includes,12 Screw Collar Caps(6 Coarse Thread & 6 Fine Thread) 6 yellow Spouts and rubber gaskets, 6 nozzle caps with threads，2 kinds of gas con vent caps . And the drill bit needed to install the gas con vent caps . During the installation and use process, if you ne....

Check Stock

C16-20651 18.7 Inch 40lb/178N Gas Struts Shocks Spring Lift Support for Leer Camper Shell Topper Rear Windows Door Truck Cap Toolbox Canopy Struts Replacement Parts, Set of 2 by HUOPO

...P40S10, These camper shell shocks are compatible with many truck canopy types, LEER truck cap parts, ARE truck topper parts, Snugtop replacement parts, These are the perfect OEM replacement parts..
【C16-20651 Struts Package Content】Package contains 18.7 inch gas struts*2. Installation with a flat screwdriver, no special tools required..
【13 Months Replacement Warranty】 HUOPO offer a 13-month replacement service. Let us know your concerns about Huopo products. Contact us via Amazon Mail. Our customer service team will respond quickly and within 12 hours to give you a pleasant shopping experience..

Check Stock

MFSTUDIO 45” Outdoor Rectangular Gas Fire Pit Table，50000 BTU Propane Iron Plate Embossing Fire Table with Lid and Blue Glass for Patio,Backyard and Balcony,Black

【Multi-function Fire Pit Table】:This gas fire pit table can be used as an outdoor dining-table, bar table, coffee table etc. easily by covering the lid provided when not burning.When it's rainy and snowing, waterproof Cover protact your propane fire pit table from the bad weather..
【Safe &Great Heat Output】:The outdoor fire table is CSA certified.Our outdoor fire pit use propane gas to support stable and clean burning. Our gas fire pit table is 50,000 BTU heat output ,providing ample warmth and creating a warm and romantic bonfire atmosphere..
【Unique appearance and solid quality】Metal steel frame with E-coating needs no special maintenance,rust and weather resistant, easy to clean, easy to assemble.Unique iron plate embossing shows the designers artistic inspiration and life experience.
【Automatic Gas Cut-Off Device】 when the fire is extinguished during combustion, the gas will be cut off automatically within 1 minute to prevent gas leakage and ensure safety.
【Dimensions】:Overall Table Size: 45"L x 23"Wx 25"H,Weight :70.5 lbs.Free 14.3 lbs Arctic Ice Decorative Glass Rock Set..

Check Stock

Argon CO2 Flow Meter Regulator with 80 Inches 6.6Ft Gas Hose for TIG MIG Welder 10 to 60 CFH - 0 to 4000PSI Pressure Gauge CGA-580 Inlet Precise Brass Flow Meter

[APPLICATIONS] - Our gas pressure regulator/flowmeter can be used with a variety of gas cylinders including argon, helium, nitrogen, and argon/carbon....
[CGA580 CONNECTION] - The Flow Meter Regulator is suitable for standard Gas tanks with CGA-580 inlet connection, with a unique filter port design on....
[MEASUREMENT UPGRADE] - The 4000PSI gas meter is more widely used than 3500PSI. If you need to measure more corrosive gases, facing some special....
[RELIABLE QUALITY] - The body of our gas flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The....
[PACKAGED WITH HOSE] - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and....

Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

...that the cap can be completely sealed..
High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
Simple to install, Each set of products includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 yellow Spouts and rubber gaskets, 2 nozzle caps with threads，2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need as....

Check Stock

30 x 16g Threaded CO2 Cartridges Refills for Bike Bicycle Pump CO2 Inflator Heads - Great Refill for Mountain Or Road Bikes Tires

TIME SAVING & EFFORTLESS: CO2 inflators are the devices designed to inject CO2 gas (via CO2 cartridges) into your bicycle tires. Those 16g threaded CO2 cartridges are high pressure. It only takes a few seconds to release the whole bottle of gas. Also great for inflating a tubeless tire..
PORTABLE: CO2 cartridges are so light and compact, easy to carry around in your saddle bag, backpack, attached on bottle cage holes & under saddles (with special adaptors)..
PRECISELY THREADED: Well threaded cartridges would match the high quality inflator heads perfectly. It ensures that the cartridge could be screwed right to the end of the CO2 inflator head where the pin punches a hole..
STRICT QC: Every Cartridge is weighted before packing in the factory!.
WARNING: Never store the cartridges in or near any hot place, such as in the car under direct sunlight, near heater and oven. Never use low quality CO2 head. Make sure the head punches the bottle fully, check if the gas being released within seconds. If not, or the gas being released very slowly or the gas freezing the head, please keep discharging the gas for a few mins until the bottle is fully empty..

Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

...our oil tank mouth size before purchasing..
High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you c....

Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(1 Kit-Yellow) with 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

...that the cap can be completely sealed..
High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
Simple to install, Each set of products includes, 2 Screw Collar Caps(1 Coarse Thread &1 Fine Thread) 1 yellow Spouts and rubber gaskets, 1 nozzle caps with threads, 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you c....

Check Stock

Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps

... that the cap can be completely sealed..
High quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
Anti overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps).
Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can....

Check Stock

Gas Can Spout Replacement ,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps,Thick Rubber pad,Spout Cover,Base Caps

...that the cap can be completely sealed..
High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
Can cover more oil cans, We offer two types of gas con vent caps, (Gas Con Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Con Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
Simple to install, Each set of products includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 yellow Spouts and rubber gaskets, 2 nozzle caps with threads，2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need as....

Check Stock