ReviewsSpi Isolators

Wztepeng 500A 12V Mobile Audio Relay Battery Isolator 500Amp 12Volt Relay

  • Battery Isolator:Battery isolators are suitable for applications that need to isolate multiple batteries, such as mobile audio, marine, powered sports, etc. It is used to isolate batteries that power AV, navigation, etc. It allows the second battery to be fully dedicated to the sound system and does not create a voltage drop like common isolators tend to do. The isolator will draw less than 1 amp when your vehicle is powered on..
  • Extends battery life:its a must for daily driver systems,This 500 amp continuous duty relay does not have the voltage drop that a solid state battery isolator has and does a much better job of charging auxiliary batteries through..
  • Feature:Made of high-quality materials, excellent performance and durable.Easy to install and start up immediately..
  • Package Include:1 * 500 Amp 12V Mobile Audio Relay Battery Isolator.
  • Warranty: For any reason, if you are not satisfied with your purchase, please contact us directly. We offer Half a year warranty, 100% satisfaction guarantee..
Check Stock

Adafruit ItsyBitsy M4 Express Featuring ATSAMD51

  • The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds..
  • This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!.
  • Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC..
  • There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data..
Check Stock

CenturyLink ZyXEL PK5001z

  • DSL Modem For Century Link Phone Line and Internet Service.
  • As part of its wireless security design, the PK5001Z supports WPA2/WPA/WEP and features a hardware WPS button allowing customers to enjoy easy setup....
  • Wired Transfer Rate: 10/100/1000Mbps --- Wireless Transfer Rate: 300Mbps.
  • Through ZyXEL’s implementation of dual Ethernet firewalls (NAT and SPI), the PK5001Z is able to identify and manage malicious content and....
Check Stock

GearAmerica UBER Shackle Isolators – Only for GA UBER Shackles Will Not Fit a 3/4 D Ring – Helps Prevent Corrosion and Protect Finish – Reduces Noise and Rattling – 2 Pack

  • Keep Your Equipment Safe: Protects your vehicle and your Mega Shackles from scrapes, dings and scuffs and prevents corrosion.
  • Silence Rattle Noise: Our isolators work wonders to eliminate rattle noise while keeping your bumper safe.
  • Exclusively Fits GearAmerica Mega Shackles : These isolators are the perfect functional complement to our bold, virtually unbreakable GearAmerica Mega....
  • Purchase with Confidence: All GearAmerica products include our industry-leading Hassle-Free Lifetime Replacement Warranty.
  • If You Love the Open Road, Join Us: Our mission is to advocate and live a lifestyle of freedom, with respect for nature & machinery, that’s why....
Check Stock

Studio Monitor Isolation Pads - Suitable for 6.5'- 8' inch Speakers - Large Speaker Isolation Pads Fit Most Desktops - High-Density Acoustic isolation Foam - Angled Speaker Foam Stand - 2 Speaker Pads

  • Speaker isolation pads size 10.4 x 13 x 1.6 Inches (W x D x H). Speaker foam is designed to fit with the most popular 6.5″ – 8″ Large monitors.
  • Speaker platform high-density acoustic isolation foam for professional use (50kg/m^3 density)..
  • Angled speaker stand two-component design, monitor isolators allow 5 different angle configurations..
  • Speaker stand desk generates cleaner, more precise sound by reducing vibrations and low-end distortion..
  • Subwoofer sound isolation pads keep your studio’s desktop clean look with no logo on the front of the monitor isolators.
Check Stock

Adafruit 4201 Airlift – ESP32 WiFi Co-Processor Breakout Board

  • a breakout board that lets you use the powerful ESP32 as a WiFi co-processor..
  • Having WiFi managed by a separate chip means your code is simpler,.
  • Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer.
  • We placed an ESP32 module on a PCB with level shifting circuitry, a 3.3V regulator, and a tri-state chip for MOSI so you can share the SPI bus with other devices.
Check Stock

Happymodel Mobula6 1S 65mm Brushless Whoop Drone Mobula 6 BNF AIO 4IN1 Crazybee F4 Lite Flight Controller Built-in 5.8G VTX (Frsky RX,19000KV)

  • Flight controller: CRAZYBEE F4 Lite Firmware target: Frsky SPI RX version is CrazybeeF4FR.
  • Flysky version is Crazybee F4FS. Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready. Built-in Betaflight OSD(SPI Control). Built-in 5.8G VTX. Built-in SPI Frsky/Flysky receiver. Built-in 5V 1A BEC. Built-in voltage detection..
  • Onboard 4in1 ESC: MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600.
  • Runcam Nano3: Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable Day/Night: Color.
  • Onboard 5.8g 40-CH 25mw VTX: Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels Smartaudio ready.
Check Stock

2.9inch E-Ink Display Module 296x128 Pixel White,Black Two-Color 3.3V/5V E-Paper Screen LCD Support Partial Refresh SPI Interface for Raspberry/Jetson Nano/Ard/Nucleo

  • 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on..
  • Display color: black, white. Grey level: 2. Partial refresh time: 0.3s. Full refresh time: 2s. Refresh power: 26.4mW(typ.). Standby power: 170°..
  • Interface: 3-wire SPI, 4-wire SPI. Outline dimension: 89.5mm × 38mm. Display size: 66.89mm × 29.05mm. Dot pitch: 0.138 × 0.138..
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.Operating voltage: 3.3V/5V. Ultra low power consumption, basically power is only required for refreshing.No backlight, keeps displaying last content for a long time even when power down.
Check Stock

Zeroplus Logic Analyzer Lap-C Pro,32-Channels,128Mb per Channel, Compitable with Windows, Portable & Flexible

  • 32-Channels Logic Analyzer, 128Mb per Channel.
  • 6 protocol triggers (hardware): I2C, I2S, SPI, SVID, UART, CAN2.0B.
  • Pattern Generator: I2C, SPI, UART, CAN, more than 120 built-in protocol decoders.
  • Long-time records: Transfer via USB 3.0 to hard drive to sample for hours or days.
  • Compitable with Windows OS 10/ 8.1 / 7 (32 or 64 bit).
Check Stock

Geekworm for Raspberry Pi 4 Model B, 3.5 inch Touch Screen with ABS Case and Pi 4 Heatsinks Kit, Max 50FPS 480x320 Pixel Monitor TFT Touch LCD (Support Raspbian, Ubuntu, Kali, Retropie System)

  • For the document and download information, refer to Geekworm WiKi search (3.5_LCD_B)..
  • Note: 1. The Raspberry Pi 4B mother board and cooling fan is not included in all the packing list. 2. The black ABS case only suitable for this 3.5 inch screen with Raspberry Pi 4 Model B, do not support other Raspberry Pi versions. Not support install cooling fan..
  • Physical resolution 320 x 480, with resistive touch control.
  • it supports up to 125MHz SPI signal input, showing stable and no flicker.
  • Support Raspbian/Ubuntu/Kali/Retropie system, provide driver and image, please refer to WiKi(user manual)..
  • LCD Interface: SPI (up to 125MHz SPI input, Max FPS: 50Mhz).
Check Stock

Mono-gatari 4Pcs Spring Vibration Isolator Ceiling Vibration Damping Mounts Anti Vibration Ceiling Suspended Mounted with Removable Frame for A/C Air Handler Bedroom Theater Studio 110 Lb Capacity

  • 【Damping Structure】The red part is made of unique damping silica, better functioning in absorbing vibration, especially for places with subwoofers in entertainment venues..
  • 【High Quality】Vibration damping mounts is composed of 3mm thick steel spring, damping silicone layer, outer frame. Silicon applied is environmentally friendly material..
  • 【Specification】Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 23.6 inch. E.g. 63~99 isolators are needed for a room aera of 215~322 sq ft..
  • 【Easy Installation】Anti vibration isolator spring is designed with a 5/16 inch (M8) pre-drilled bolt hole, easy installation on ceilings, floors, walls, ducts, HAVC, etc..
  • 【Wide Application】Anti vibration ceiling suspended mounted is widely used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room, TV stations, concert halls, etc..
Check Stock