ReviewsSpindle Pin

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Bessey HS-6 6-Inch Wood Handscrew Clamp

  • Adjustable jaws for a strong grip or delicate for those small projects.
  • Oiled wooden jaws won't damage or slip on your work piece.
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from Cold Drawn, carbon steel..
  • Acme thread for Rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, Extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard Maple for a lifetime of use, are oiled to resist glue..
  • Feature a large diameter spindles for added strength and durability. Spindles and swivel nuts are made from cold drawn, carbon steel..
  • Acme thread for rapid operation and years of hard use..
  • Hardwood handles are over-sized for comfort, extra torque and reinforced with steel ferrules. The spiral pin used to secure the handles to the spindle is easy to remove for repair or replacement..
  • The jaws, made from quality hard maple for a lifetime of use, are oiled to resist glue..
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

Road Bike Pedals - Built-in 3 Bearings,Aluminum Alloy Antiskid Durable 9/16\ Lightweight Carbon Fiber Sealed Bearing Flat Pedals (Black)

  • 【LIGHTWEIGHT & WIDE PLATFORM】Built-in 3 bearings,carbon fiber bushing outside of the spindle makes it more durable and anti-corrosion.Only 282 g(0.62lbs) each pair, the dimension of bicycle platform is 10*9.3*2.0 cm (3.9"*3.6"*0.8"), 114 mm wide platform pedals support the foot more steady during cycling, provide a more comfortable riding experience for you..
  • 【Traction Pin for Better Grip】12 Anti-skid pins : Antiskid nail surface, strong grasps, no longer skid, to ensure that the rider safety. and easier to move or replace which provide better traction and grip when cycling..
  • 【Fully Sealed Bearing 】In the form of O-rings to resist moisture or grit entering the bearings or bushes, fully sealed bearing pedals prevent dust or other damage when cycling for better clearance and stability.The spindle composite of chrome-molybdenum steel material, carbon fiber bushing outside of the spindle makes it more durable and anti-corrosion..
  • 【EASY TO INSTALL】Flat pedal with standard 9/16" threads diameter 14.3mm,Using hexagon installation and removal..
  • For Road Bike Pedals 3 Bearings Carbon Fiber Bicycle Platform Pedals Non-Slip 9/16".
Check Stock

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

  • Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
  • Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
  • pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
  • #1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
  • #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
  • With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
  • including bowls, spindles, pens, other small turning projects, and much more.
  • Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.
Check Stock

YiJiLi Mountain Bike Pedals 3 Bearings Carbon Fiber Bicycle Platform Non-Slip 9/16'' (Red)

  • 【LIGHTWEIGHT & WIDE PLATFORM】carbon fiber bushing outside of the spindle makes it more durable and anti-corrosion.,Only 329 g(0.75lbs) each pair, the dimension of bicycle platform is 11.4*9.4*2.0 cm (4.48"*3.7"*0.8"), 114 mm wide platform pedals support the foot more steady during cycling, provide a more comfortable riding experience for you..
  • 【Traction Pin for Better Grip】12 Anti-skid pins : Antiskid nail surface, strong grasps, no longer skid, to ensure that the rider safety. and easier to move or replace which provide better traction and grip when cycling..
  • 【EASY TO INSTALL】Flat pedal with standard 9/16" threads diameter 14.3mm,Using 6 mm hexagon installation and removal..
  • UNIVERSAL:Stardard 9/16 inch spindle,3 Bearings,platform pedal for long ride comfortable and pedaling efficiency..
  • For Mountain Bike Pedals 3 Bearings Carbon Fiber Bicycle Platform Pedals Non-Slip 9/16".
Check Stock

RaceFace Aeffect Bike Pedal, Black

  • Hex-head threaded pin design offers more bite for added security.
Check Stock

Hengha Golf Cart Inductive Throttle Sensor Fits for EZGO DCS TXT PDS Medalist 1994+ Electric 25854G01

  • 1.This product suitble for Club Car(DS/IQ)1981-up gasoline and electric..
  • 2.Package Contents: 1. 2 x King Pin Assembly OEM#1016386/1010121 2. 2 x Upper bronze bushing OEM#8067 3. 2 x Lower bronze flanged bushing OEM#7048 4. 2x thrust bearing washer OEM#1010150 5. 2 x king pin wave washer OEM#1016389.
  • 3.Our products are well manufactured and match perfectly..
  • 4.It takes time to replace ASM spindle kits, which can not only improve the stability of your golf cart, but also exercise your practical ability..
  • 5.We are committed to providing you with high-quality service. If you have any demand or question for products, please contact us. Thank you!.
Check Stock