ReviewsSpindle Sanding Sleeves

LINE10 Tools 16 Pack Sanding Drum and Sleeves Set for Drill, 2-inch Long, 60, 80 and 120 Grit

Extra long rubber drum sanding set with each drum is mounted on a 1/4 inch shank which converts your drill or drill press into a mini spindle sander.
Great for Woodworking, Ideal for smoothing out rough round profile edges, contours and curved cuts.
Ideal for sanding and smoothing the inside surfaces of up to 2 inch deep drilled holes.
Cleans up saw marks from your jigsaw, bandsaw or holesaw and any other contour cut.
Includes 4x Rubber drum in 1/2 in, 3/4 in, 1 in, and 1-1/2 inches in diameter, with 12x Sanding sleeves in 60, 80 and 120 grit.

...FECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools.
Each sanding bit provides a different diameter to meet your needs..
FITS YOUR TOOLS: Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments.
Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool.
REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 replacement sandpaper bands for each size mandrel for a total of 16 sanding bands.
Each size features two 80 and two 120 sand paper grits to meet your needs.
BUILT TO LAST: The 4 drill sanding attachment bits are designed for strength, and longevity.
The rubber drill sanding drums expand when they are spinning to secure the grit sleeve on the drum allowing for safer and more effective working conditions.

【Function】This spindle sanding drum Kit is used for sanding and polishing curves, resurfacing, contouring, smoothing inner hole, and material removal etc. Especially excellent for woodworking projects..
【Application】This spindle mandrel with drum Kit suitable for diameter in 3/4 inch, 1 inch, 1-1/2 inch wood project treatment. Length 4-1/2” great for thick wood board sanding..
【Mandrel & Drum】This spindle sander adaptor mandrel head is 3/8” diameter, fit for most oscillating drill press. Rubber sanding drum in 3size 3/4.

Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt.
Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM.
The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke.
Onboard storage maintains organization of all accessories and sandpapers.
Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt).

Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt.
Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM.
The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke.
Onboard storage maintains organization of all accessories and sandpapers.
Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt).

80 / 120 / 240 grit assorted oscillating spindle sander sleeves, 6PCS per grit.
1/2 inch, 3/4 inch,1 inch, 1-1/2 inch, 2 inch and 3 inch sanding sleeves for each grit, 4.5" in length.
Different diameters and grits fitting your task and machine perfectly.
Aluminum Oxide Abrasive providing high performance and durability.
Fitting most Oscillating Sanders in the market: RYOBI, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton, and more.

Includes four 80-grit sleeves, four 120-grit sleeves and four 240-grit sleeves.
Features a 1/2-inch, 3/4-inch, 1-inch, and 1-1/2-inch diameter sleeve in each grit.
Each sanding sleeve measures in at 3 inches in length.
Perfect for material removal, resurfacing and more.
Designed to fit the WEN HA5932 handheld Oscillating spindle sander.

Features five sizes of sanding sleeves: 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, and 2 inches.
2000 RPM motor oscillates spindle 58 times per minute with a 5/8-inch stroke.
Onboard storage maintains organization of all accessories and sandpapers.
Spacious 14-1/2 by 14-1/2-inch table bevels up to 45 degrees to accommodate angled workpieces.

80 / 120 / 240 grit assorted oscillating spindle sander sleeves, 6PCS per grit.
1/2 inch, 3/4 inch,1 inch, 1-1/2 inch, 2 inch and 3 inch sanding sleeves for each grit, 4.5" in length.
Different diameters and grits fitting your task and machine perfectly.
Aluminum Oxide Abrasive providing high performance and durability.
Fitting most Oscillating Sanders in the market: RYOBI, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton, and more.

Product 1: Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt.
Product 1: Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM.
Product 1: The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke.
Product 1: Onboard storage maintains organization of all accessories and sandpapers.
Product 2: INCLUDES: (1) Abrasive Cleaning Stick 8-1/2" x 1-1/2 " x 1-1/2" Large Size.
Product 2: FUNCTION: Extends the lifespan of your sanding disc, belts and other sander equipment by removing sawdust, pitch, gum, glue and other residue without damaging the grit.
Product 2: PREMIUM: Made with a professional grade all-natural rubber construction, this sanding eraser is designed for durability and comes with an extended length and sizable girth to take on most of your sandpaper cleaning jobs.
Product 2: EASY TO USE: Hold eraser stick against your selected abrasive to remove the built-up, clogged dust, debris and particles – returning a like-new look to your sanding surface.