ReviewsSpiral Looper

BOSS Rc-500 Loop Station, Dual-Track Powerhouse

Advanced two-track looper with onboard mixing and deep control options.
Class-leading sound quality with 32-bit AD/DA and 32-bit floating-point processing.
Stereo looper engine with 13 hours of recording time.
LCD with multi-color backlight for viewing loop status and editing parameters.
Mono/stereo inputs for easy pedalboard integration, plus independent XLR mic input with phantom power.

BANK UP/ DOWN SWITCH: Functions in Preset Mode.
Pressing switch and releasing will bank up by 5 presets, press and hold will bank down by 5 presets.
Pressing switch and releasing will switch between three of the modes (Looper, Effects, Presets).
press and hold will switch to Tuner mode.
Five numbered buttons enable selection and foot control of the different functions depending on selected mode..
DISPLAY SCREEN: Shows preset selected, effects mode and tuner..
These three LEDs at far right indicate which of three modes is in use – Looper (Green), Effects (Amber), and Presets (Red)..

2, 3, or 4 thread serger, Lay-in thread tension dial, Threading chart, Color coded thread guides.
Tension release device, Easily accessible lower looper guides, Changeable thread guide, Quick change rolled hem.
Lower looper pretension setting slider, Easily retractable upper knife, Adjustable foot pressure, Snap on presser feet.
Adjustable stitch length 1mm to 5mm, Differential feed ratio 0.5 to 2.25, Adjustable cutting width 3.1mm to 7.3mm, Maximum speed 1,300 spm.
Bonus Kit Includes: Beading Attachment, Blind Stitch Foot, 1/8” Piping Foot, 3 Pack Needles – Serger Size 14.

Run, jump and stomp to launch stunt Planes.
Includes three different Planes (Looper, glider and Wildcat) designed by aeronautical engineers to perform a variety of amazing stunts.
Looper plane performs giant loops, glider plane soars up to 100 feet and Wildcat plane does all kinds of crazy tricks.
Adjust the angle of flight with the adjustable launch stand, fly into the wind or with the wind and change how these Planes fly.
Includes 3 stunt Planes, sturdy adjustable launch stand and launch stomp pad with air hose.

AC Adapter Power Supply Cord Charger Compatible with TC Electronic Ditto Looper Guitar Effects Pedal.
Input Voltage: 100~240VAC 50/60Hz, Worldwide Use.
Short-circuit Protection, Over Voltage Protection, Over Heat Protection.
Compatibility: This Power adapter will work with TC Electronic Ditto Looper Guitar Effects Pedal.

...utput, and left and right channels volume individually adjustable .Hi-Fi sound/ no noise. Its ultra simple design and guitar-center features like true-bypass,analog dry-through,high quality audio..
⭕【Long Looping Time】 10 minutes of looping time, unlimited overdubs and undo/redo function..
⭕【Creative】Twin looper is the perfect blend of quality,creativity and simplicity, combines all essential looper functionalities. can mtach your instrument to make a subtle performance or a jaw dropping show..
⭕ 【Simple Operation】Looper Guitar Pedal allows you to play loops in reverse, you can reverse loops or slow them down to fast, half-speed or both at the same time.【About USB interface】 – When connect to computer with USB cable,two yellow LED will light up and at the same time,and you can operate the user software.Please notice the USB jack is not for power input,Supports WINDOWS/MAC Version..
⭕【Solid Construction】 Small size, heavy-duty footswitch, true bypass, full metal sturdy and well built case. 【100% Satisfaction Guaranteed】Your satisfaction is our top priority. If you have any question for this pedal, please feel free to reach our customer service. You are entitled to enjoy 12-month warranty , 30 Days Unconditional Money Back....

SKILL FIDGET- The Original Marble Spinner.
Place the marble in the loop and start spinning.
This Loopy Looper requires seriously skillful spinning to get the marble jumping through the gap.
Show off your skills and share on social media!.
Lock the marble in its special spot and place your Loopy Looper on its stand.

This 9V high-quality replacement power adapter is compatible with the TC Electronic Ditto Looper Effects pedal..
The plug fits a US 2-pin wall power socket..
This power adaptor is designed to meet the power specification of the Ditto Looper Effects pedal referred to here - it is the correct voltage,....
It meets and exceeds all US safety standard, features overvoltage, overcurrent and short circuit protection to protect your device, and is energy....

Looper Air Threading: Using the new easy threading feature, easily thread the machine from the threading hole to the looper with the power of a strong....
Adjustable Differential Feed: Even with easily stretched fabrics such as knits and georgette create beautifully sewn finishes by adjusting the....
Ample Fabric Throat Area: The height of the throat is 72.4 mm. Due to this increased height, the usability of the workspace has improved infinitely.
LED Sewing Light: The needle area is brightly illuminated. The long-life, energy-efficient, and eco-friendly light will not heat up, even after a long....
Amazingly Quiet Operation: The sound-reducing design minimizes operating noise and the MO-1000 sews with less vibration.

This 9V high-quality replacement power adapter is compatible with the TC Electronic Ditto X2 Looper Effects pedal..
The plug fits a US 2-pin wall power socket..
This power adaptor is designed to meet the power specification of the Ditto X2 Looper Effects pedal referred to here - it is the correct voltage,....
It meets and exceeds all US safety standard, features overvoltage, overcurrent and short circuit protection to protect your device, and is energy....

SKILL FIDGET- The Original Marble Spinner.
Place the marble in the loop and start spinning.
With this Loopy Looper you’ll need to find the perfect spin speed to keep your marble sticking to the rail..
Show off your skills and share on social media!.
Lock the marble in its special spot and place your Loopy Looper on its stand.