DEWENWILS Roof Heat Cable, 18ft Heat Tape for Pipe, Gutter, Roof, Self-Regulating Cable Pre-Assembled, UL Listed
Designed for water filled plastic (including PEX) and metal supply pipes only. Do not use on drain lines, fuel lines, hoses, empty water pipes, steam lines or gutters. Three year limited warranty. If you have any question about the product, please contact us and we will try our best to help you..
Quick and easy to install. Minimum pipe length is 3 feet. Cable will be applied straight along the pipe, and will protect pipe from 3/8" to 1 1/2" in diameter..
Save energy. 120 Volt, 7 watts/ft. 2 ft 18/3 cold lead with plug.The build-in thermostat automatically turns the heating cable on below 42.8° F (6° C) and off above 55.4° F (13 ° C)..
UL approved. Durable polyurethane as inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Never allow heating cable to touch, acorss , spiral or overlap itself at any point..
Testing the cable before installation. Uncoil the cable, plug in the cable. Wrap a bag of ice around the thermostat. The thermostat will turn the cable on when the temperature below 42.8° F. Wait about 20 minutes. The cable should now feel warm to touch. Then turn it off..
Cord Protectors Flexible PVC Cable Cover Keep Cats from Chewing Cords, Dog Cord Protector Clear Electrical Wire Protector Tubing Cable Sleeves, Home Office School Supplies (Total 30 Feet)
Application Areas: the spiral cable wrap is suitable for computer cables, power cords, water pipes, air conditioning pipes, heating pipes, hoses, oil pipes, hydraulic pipes, high-pressure pipes of excavators, loaders and other construction machinery and injection molding machine, provides better protection and extend the life of the pipe.
Quality Material and Size Detail: dog bite cable protector is made of pp material, with bright appearance, good resilience, wear, aging and oil resistance, ensuring long term use.
The size of each cable wrap is 9.8 ft x 0.4 inch, which is long enough to meet your needs.
Spiral Design: the cat wire protector adopts a spiral design, which is convenient to install manually, saving time and effort.
You only need to put the messy wires in the wrap to avoid entanglements and fetters, providing a clean and tidy space for you.
Practical Cover: this cord covers for pets effectively protects your cables from being chewed and torn by cats, dogs, and other small pets.
The bright colors allow them to also be applied to decorate rooms.
How of Use: cut the length of the wire protector tubing for pets to the desired size, then find the slit and put the wire in.
Once the wire is insert, the slit will remain closed.
JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
ROOF HEAT CABLE - keeping your pipe/water lines/roofs/gutters from freezing during the winter,functioning perfectly for plastic and metal pipes, all kinds of roofs, keep the water flowing in gutters.
SELF-REGULATING TECHNOLOGY - the cable output will change automatically depend on the ambient temperature, the output goes up when the temp is low and goes down when it's high, saving energy and electricity for you, illuminated plug lets you see if the heat cable is working from a distance.
HEAVY DUTY CABLE - 6FT cold lead and 6FT/18FT heat cable is commercial grade for long-time and heavy-duty usages, PVA out jacket, 5W/ft under 50°F for heating pipes.
EASY TO INSTALL - pre-assembled for quick installation, the heat cable can be straight-traced or spiral on the pipe, be aware that the lowest installation temperature is 14°F and the maximum exposure temperature is 221°F.
RELIABLE FOR HEATING PIPES - UL and ETL cerfied, illuminated plug lets you see if the heat cable is working from a distance, please test the cable before the installation, 1 Year warranty provided.
Material: The roof deicing cable is made of plastic + copper core, the self-regulating temperature design is safer and energy saving, easy and reliable to use on your roof..
Features: Pipe heating cable 50ft(15.24 meters), no need for thermostat, this heated cable can self-limiting temperature of 65℃, greatly reducing energy waste. (no heating when the internal temperature reaches 65℃). Three pulgs in US standard to meet the circuit use of most households..
Function: Designed to prevent pipes from freezing and water damage caused by ice dams, from forming on roofs, gutters and downspouts. Protect your roof from damage and leaking, keep the water flowing in gutters with our heat trace cable roof..
Use Places: This heat trace cable is perfectly for roofs, gutters and downspouts, easy heat roof de-icing cable..
Installation: Can be installed by spiral, crossing, straight, etc. Easy and safe to follow instructions, no overheat risk, and will not short or burn out if the pipe heating cable is overlapped..